Re: [Paparazzi-devel] Bootloader loaded, AC uploaded --- now what?

[David Carr]

Pascal,

Thanks for the help.  The only airframes in the default config were TJ1, 
MJ5 and BOOZ.  I added an airframe:

<aircraft
  name="DJet"
  ac_id="149"
  airframe="airframes/funjet1.xml"
  radio="radios/cockpitSX.xml"
  telemetry="telemetry/default.xml"
  flight_plan="flight_plans/basic.xml"
  settings="settings/basic.xml"
  gui_color="blue"
 />

And reuploaded.  Now my LED flashes!

Thanks for the help.
-DC

address@hidden wrote:
> Hi David,
>
> which airframe did you use ? The only working example for a Tiny 2.1 is
> funjet1.xml.
> And one led should be blinking (upload was apparently successful)
>
> --Pascal
>
> Quoting David Carr <address@hidden>:
>
>   
> > Hey guys,
> >
> > I've just assembled my  Tiny 2.11 board.  I've got the bootloader loaded
> > and an aircraft uploaded -- I think.  Whats next?  How can I verify
> > functionality/communicate with the board?  I don't have any blinking
> > LEDs, etc.
> >
> > Here is the last message from the aircraft upload.  I think this means
> > its working:
> >
> > Found USB device
> > BootROM code: 2.12
> > Part ID: 0x0402FF25 (LPC2148, 512k Flash, 32k+8k RAM)
> > BootLoader version: 1.3
> > ########################
> > Starting software at 0x00004000
> >
> > Thanks for the help,
> > -DC
> >
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >     
>
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>