Re: [Paparazzi-devel] Bootloader loaded, AC uploaded --- now what?

[pascal . brisset]

Hi David,

which airframe did you use ? The only working example for a Tiny 2.1 is
funjet1.xml.
And one led should be blinking (upload was apparently successful)

--Pascal

Quoting David Carr <address@hidden>:

> Hey guys,
>
> I've just assembled my  Tiny 2.11 board.  I've got the bootloader loaded
> and an aircraft uploaded -- I think.  Whats next?  How can I verify
> functionality/communicate with the board?  I don't have any blinking
> LEDs, etc.
>
> Here is the last message from the aircraft upload.  I think this means
> its working:
>
> Found USB device
> BootROM code: 2.12
> Part ID: 0x0402FF25 (LPC2148, 512k Flash, 32k+8k RAM)
> BootLoader version: 1.3
> ########################
> Starting software at 0x00004000
>
> Thanks for the help,
> -DC
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>