RE: [Paparazzi-devel] Airframe Servo Definitions

[akochevar]

Matt,

those numbers corispond to the numbers of the signal of the Tiny.  If you look at the eagle they should be labeled something like 0 1 2 3 4 5.  so you need to make sure you are driving the right servos

> -------- Original Message --------
> Subject: [Paparazzi-devel] Airframe Servo Definitions
> From: Matthew Currie <address@hidden>
> Date: Sat, January 05, 2008 1:57 am
> To: Paparazzi Devel <address@hidden>
>
> Group,
>
>
> Quick question about the airframe file. I configured my radio 
> properly and can easily switch the manual/auto1/auto2 modes. The servos 
> appear to be driving hard in one direction (the same) and binding hard 
> so I need to shut it down quick. Let it be noted I do not have IR 
> sensors plugged in but I did not figure it would matter for manual mode 
> (does it?). What I want to double check is the servo section of the XML 
> file. Is the order important here? What does the no="N" argument mean? 
> After I nail this I should be flight worthy. Thanks for all the help to 
> this point.
>
>
> Regards,
> Matthew Currie
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> Paparazzi-devel@nongnu.org
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel