[Paparazzi-devel] Re: No servo output on the Classix?

[Alexis Lussier Desbiens]

Guys,

I got a little bit further in the debugging...

It seems that PWM_SERVO_0 (and so on) are not defined anywhere in the
software... So servos_direct_hw.c doesn't do anything and there is no
output on the PWM pins. I tried to manually defined these, and it ends
up outputting something that looks like a servo pulse but there is no
way to control that from the RC (but I guess other pieces of code are
missing if PWM_SERVO are not defined somewhere...

Anyone got an idea why PWM_SERVO_0 is not defined? I am using a
classix in "direct" mode (PWM output on FBW PWM port).

Anyone used servo_direct_hw.c with success?

Thanks!

     Alexis

On 10/18/07, Alexis Lussier Desbiens <address@hidden> wrote:
> Hi there,
>
> Anyone got an idea why my paparazzi is not outputting pwm for the
> servos on the FBW PWM port? I am using servo_direct_hw...
>
> I am using a Classix, the PPM frame is decoded properly and I can flip
> the autopilot to MANUAL mode (0 in the telemetry data)... but nothing
> happens. There is only a weird pulse on PWM3!
>
> Thanks!
>
>      Alexis
>


-- 
http://mecano.gme.usherb.ca/~alussierdesbiens
"De' remi facemmo ali"