RE: [Paparazzi-devel] LiveCD for paparazzi2 (flight controller hardware version 1.2.1)

[antoine . drouin]

Hi Doni

I wouldn't advice to use an avr board - nobody is using that anymore and thus
this architecture is geting no test at all. Probably someday we'll discover that
one of the newly added feature is too "heavy" for the avr processor. Plus you'll
love flashing through USB.

If you're scared about soldering the fine pitch of the arm processor, you might
use a header board like this one
 http://www.olimex.com/dev/lpc-h2148.html
At 40$, this is unbeatable :)

If you add a commercial BEC as supply and a SAM module for the GPS, you'll end
up with something similar to a tiny.
On the header board, I would solder the crystal and remove the reset switch to
avoid any in flight accident.

hth

Poine

Selon Widyawardana Adiprawita <address@hidden>:

> Dear Nicolas,
>
> I go to the paparazzi irc channel, and met a few nice
> guy (especially Anton, this is his login name, I don't
> know his real name). He suggest me to install debian
> and get the paparazzi using apt-get....
>
> I've done it, and it turns out that Plaster1 aircraft
> is an AVR system, so I think my problem is solved.
>
> Right now I have to finish the hardware.
>
> Thank's to you all
>
> -doni-
>
> --- Nicolas Calderon
> <address@hidden> wrote:
>
> > Hi Doni,
> >    Just to clarify a few things... Paparazzi2 is the
> > old version of
> > paparazzi, but the newest version, paparazzi3, also
> > support the older
> > hardware (as 1.2.1 boards). We had the same reflex
> > of going for something
> > stable (pprz2), but you will probably find it easier
> > to go directly with
> > pprz3 directly (it is more up-to-date, has a lot of
> > enhancement, more
> > support).
> >
> >    As for the LiveCD, I honestly didn't try it in a
> > while as I have my local
> > installation of Debian. I am pretty sure the newest
> > LiveCD can be used to
> > build paparazzi2 and to program the 1.2.1 board.
> >
> > -----Original Message-----
> > From:
> >
> address@hidden
> >
> [mailto:address@hidden
> > On
> > Behalf Of Widyawardana Adiprawita
> > Sent: 27 février 2007 03:27
> > To: address@hidden
> > Subject: [Paparazzi-devel] LiveCD for paparazzi2
> > (flight controller hardware
> > version 1.2.1)
> >
> > Dear All,
> >
> > I want to start implementing paparazzi2 (flight
> > controller hardware version 1.2.1) because it's
> > easier
> > to get the hardware components where I live.
> >
> > I have downloaded the the LiveCD from
> >
> http://www.recherche.enac.fr/paparazzi/paparazzix/paparazzix_3.1_RC2.iso
> >
> > But I think it only supports the ARM processor.
> >
> > So I think I should download the older LiveCD
> > somewhere... Anyone can help ?
> >
> > Thank's
> >
> > -doni-
> >
> >
> >
> >
> >
> ____________________________________________________________________________
> > ________
> > Need Mail bonding?
> > Go to the Yahoo! Mail Q&A for great tips from Yahoo!
> > Answers users.
> >
> http://answers.yahoo.com/dir/?link=list&sid=396546091
> >
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> >
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >
> >
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> >
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
>
>
>
>
>
____________________________________________________________________________________
> Yahoo! Music Unlimited
> Access over 1 million songs.
> http://music.yahoo.com/unlimited
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>