Re: [Openvortex-dev] Distorted sound with alsa drivers

[Marc Heerdink]

Op wo 14-05-2003, om 00:58 schreef Jeff Muizelaar:
[..]
> Your mixer settings are sane right? Do things play at the proper speed?
> Other than that I don't have any ideas as to what might be causing it.

Things sometimes play faster than they should, let's say 150-200%.
Usually after stopping playback and starting it again, the speed is
normal again. Then after a while, it's getting fast again.

The mixer settings are sane, they're always 100/100.

> Does anything other than this type of stuff show up in the logs?
> 
> vortex: start 0
> vortex: stop 0
> vortex: start 0
> vortex: stop 0
> vortex: de alloc 0
> Vortex: periods 16, period_bytes 4096, channels = 1
> vortex: alloc 0
> Vortex: periods 16, period_bytes 4096, channels = 1
> vortex: de alloc 0
> vortex: alloc 0
> Vortex: periods 16, period_bytes 4096, channels = 2
> vortex: de alloc 0
> vortex: alloc 0
> Vortex: periods 16, period_bytes 4096, channels = 2
> vortex: de alloc 0
> vortex: alloc 0
> vortex: start 0

That's all there is in the logs :/ Many of those periods lines, that's
all. A total of 310 lines for 24 seconds of playback..


> > I have a Diamond Monster Sound II with an Aureal Vortex2/au8830 chip. If
> > you need other info, I'll be glad to provide it.
> 
> how about a lspci -vvnd 12eb:0002 just for reference.

00:0a.0 Class 0401: 12eb:0002 (rev fe)
        Subsystem: 1092:3003
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1000ns min, 3000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at e0000000 (32-bit, non-prefetchable)
[size=256K]
        Region 1: I/O ports at a400 [size=8]
        Region 2: I/O ports at a000 [size=8]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-



Completely different question: is the setpci fix still needed with the
alsa driver on Via boards?


Marc

-- 
         (__)
         (oo)
   /------\/
  / |    ||          ..."Have you mooed today?"...
 *  /\---/\        Marc Heerdink <address@hidden>
    ~~   ~~