Hi Maxim,
On Wed, 16 Aug 2023 at 14:15, Maxim Uvarov <
maxim.uvarov@linaro.org> wrote:
>
>
>
> On Wed, 16 Aug 2023 at 20:39, Simon Glass <
sjg@google.com> wrote:
>>
>> Hi Maxim,
>>
>> On Wed, 16 Aug 2023 at 03:09, Maxim Uvarov <
maxim.uvarov@linaro.org> wrote:
>> >
>> > On Wed, 16 Aug 2023 at 14:42, Ilias Apalodimas <
ilias.apalodimas@linaro.org>
>> > wrote:
>> >
>> > > On Mon, Aug 14, 2023 at 07:32:46PM +0600, Maxim Uvarov wrote:
>> > > > * can return immediately if previous request was cached or it might
>> > > require
>> > > > @@ -38,3 +39,28 @@ int ulwip_dhcp(void);
>> > > > * !0 if error
>> > > > */
>> > > > int ulwip_wget(ulong addr, char *url);
>> > > > +
>> > > > +/**
>> > > > + * ulwip_tftp() - load file with tftp
>> > > > + *
>> > > > + * Load file with tftp to specific address
>> > > > + *
>> > > > + * @param addr - address to store downloaded file
>> > > > + * @param filename - file name on remote tftp server to download
>> > >
>> > > Please fix function comments properly
>> > >
>> > > > + *
>> > > > + *
>> > > > + * @return 0 if success, !0 if error
>> > > > + */
>> > > > +int ulwip_tftp(ulong addr, const char *filename);
>> > > > +
>> > > > +/*
>> > > > +* This function creates the ping for address provided in parameters.
>> > > > +* After this function you need to invoke the polling
>> > > > +* loop to process network communication.
>> > > > +*
>> > > > +*
>> > > > +* @ping_addr start address to download result
>> > > > +* Return: 0 for success
>> > > > +* !0 if error
>> > > > +*/
>> > > > +int ulwip_ping(char *ping_addr);
>> > > > diff --git a/net/lwip/Makefile b/net/lwip/Makefile
>> > > > index 4c6df94807..8b3e843426 100644
>> > > > --- a/net/lwip/Makefile
>> > > > +++ b/net/lwip/Makefile
>> > > > @@ -67,5 +67,6 @@ obj-$(CONFIG_NET) += port/sys-arch.o
>> > > >
>> > > > obj-$(CONFIG_CMD_DHCP) += apps/dhcp/lwip-dhcp.o
>> > > > obj-$(CONFIG_CMD_DNS) += apps/dns/lwip-dns.o
>> > > > +obj-$(CONFIG_CMD_PING) += apps/ping/
>> > > > obj-$(CONFIG_CMD_TFTPBOOT) += apps/tftp/
>> > > > obj-$(CONFIG_CMD_WGET) += apps/http/
>> > > > diff --git a/net/lwip/apps/ping/Makefile b/net/lwip/apps/ping/Makefile
>> > > > new file mode 100644
>> > > > index 0000000000..dc63feb7b5
>> > > > --- /dev/null
>> > > > +++ b/net/lwip/apps/ping/Makefile
>> > > > @@ -0,0 +1,11 @@
>> > > > +ccflags-y += -I$(srctree)/net/lwip/port/include
>> > > > +ccflags-y += -I$(srctree)/net/lwip/lwip-external/src/include
>> > > -I$(srctree)/net/lwip
>> > > > +ccflags-y += -I$(obj)
>> > > > +
>> > > > +.PHONY: $(obj)/ping.c
>> > > > +$(obj)/ping.o: $(obj)/ping.c
>> > > > +$(obj)/ping.c:
>> > > > + cp $(srctree)/net/lwip/lwip-external/contrib/apps/ping/ping.c
>> > > $(obj)/ping.c
>> > > > +
>> > > > +obj-$(CONFIG_CMD_PING) += ping.o
>> > > > +obj-$(CONFIG_CMD_PING) += lwip_ping.o
>> > > > diff --git a/net/lwip/apps/ping/lwip_ping.c
>> > > b/net/lwip/apps/ping/lwip_ping.c
>> > > > new file mode 100644
>> > > > index 0000000000..611fcaf591
>> > > > --- /dev/null
>> > > > +++ b/net/lwip/apps/ping/lwip_ping.c
>> > > > @@ -0,0 +1,37 @@
>> > > > +// SPDX-License-Identifier: GPL-2.0
>> > > > +
>> > > > +/*
>> > > > + * (C) Copyright 2023 Linaro Ltd. <
maxim.uvarov@linaro.org>
>> > > > + */
>> > > > +
>> > > > +#include "lwip/opt.h"
>> > > > +#include "lwip/ip_addr.h"
>> > > > +#include "ping.h"
>> > > > +#include "lwip_ping.h"
>> > > > +
>> > > > +static ip_addr_t ip_target;
>> > > > +
>> > > > +static int ulwip_ping_tmo(void)
>> > > > +{
>> > > > +
>> > > > + log_err("ping failed; host %s is not alive\n",
>> > > ipaddr_ntoa(&ip_target));
>> > > > + return 1;
>> > > > +}
>> > > > +
>> > > > +int ulwip_ping(char *ping_addr)
>> > > > +{
>> > > > + int err;
>> > > > +
>> > > > + err = ipaddr_aton(ping_addr, &ip_target);
>> > > > + if (!err) {
>> > > > + log_err("wrong ping addr string \"%s\" \n", ping_addr);
>> > >
>> > > Invalid ip address is enough
>> > >
>> > > > + return -1;
>> > > > + }
>> > > > +
>> > > > + ulwip_set_tmo(ulwip_ping_tmo);
>> > > > +
>> > > > + ping_init(&ip_target);
>> > > > + ping_send_now();
>> > > > +
>> > > > + return 0;
>> > > > +}
>> > > > diff --git a/net/lwip/apps/ping/lwip_ping.h
>> > > b/net/lwip/apps/ping/lwip_ping.h
>> > > > new file mode 100644
>> > > > index 0000000000..0374f07d9e
>> > > > --- /dev/null
>> > > > +++ b/net/lwip/apps/ping/lwip_ping.h
>> > > > @@ -0,0 +1,15 @@
>> > > > +/* SPDX-License-Identifier: GPL-2.0+ */
>> > > > +
>> > > > +/*
>> > > > + * (C) Copyright 2023 Linaro Ltd. <
maxim.uvarov@linaro.org>
>> > > > + */
>> > > > +
>> > > > +#ifndef LWIP_PING_H
>> > > > +#define LWIP_PING_H
>> > > > +
>> > > > +#include <lwip/ip_addr.h>
>> > > > +
>> > > > +void ping_raw_init(void);
>> > > > +void ping_send_now(void);
>> > > > +
>> > > > +#endif /* LWIP_PING_H */
>> > > > diff --git a/net/lwip/apps/ping/ping.h b/net/lwip/apps/ping/ping.h
>> > > > new file mode 100644
>> > > > index 0000000000..006a18c658
>> > > > --- /dev/null
>> > > > +++ b/net/lwip/apps/ping/ping.h
>> > > > @@ -0,0 +1,19 @@
>> > > > +/* SPDX-License-Identifier: GPL-2.0 */
>> > > > +
>> > > > +#include <net/ulwip.h>
>> > > > +#include "lwip/ip_addr.h"
>> > > > +
>> > > > +#define LWIP_DEBUG 1 /* ping_time is under ifdef*/
>> > > > +#define PING_RESULT(cond) { \
>> > > > + if (cond == 1) { \
>> > > > + printf("host %s a alive\n", ipaddr_ntoa(addr)); \
>> > > > + printf(" %"U32_F" ms\n", (sys_now() - ping_time)); \
>> > > > + ulwip_exit(0); \
>> > > > + } else { \
>> > > > + printf("ping failed; host %s in not alive\n",\
>> > > > + ipaddr_ntoa(addr)); \
>> > > > + ulwip_exit(-1); \
>> > > > + } \
>> > > > + } while (0);
>> > >
>> > > On the previous patch you are defining a function to do something similar
>> > > (httpc_result()). We need to be consistent on this. Can we define a
>> > > common function for all failures? Certianly don't define a macro here and
>> > > a function elsewhere
>> > >
>> >
>> > Ilias, there I reuse lwip example ping.c. It has PING_RESULT which can be
>> > redefined by the application.
>> > This is a way to not modify this original ping.c example code.
>> > The common part of this function and httpc_result() is ulwip_exit(err) with
>> > some additional print (print is differ).
>>
>> I'll reply on this patch, although it is a general comment.
>>
>> I would like to see if we can use the cyclic feature to allow network
>> operations to happen in the background. This would involve splitting
>> each operation into:
>>
>> - setup start and kick off, e.g. ping_sttart()
>> - checking what needs doing, e.g. ping_poll()
>> - finish and clean-up, e.g. ping_finish()
>>
>> So something like:
>>
>> ping -B 1.2.3.4
>>
>> (-B is background)
>>
>> That would fire off the packet but immediately return with a prompt.
>> When the pings are received they would show on the console, with a new
>> prompt displayed. The same for tftp -B...it would start the transfer
>> but allow other commands to be sent while it is in progress.
>>
>> Part of the reason for this is that when booting there are a lot of
>> operations which take a long time and nothing happens until everything
>> is done. For example, with standard boot, mmc devices can be shown
>> right away, but USB and network ones take a lot longer, so having OS's
>> on those devices appear later on the slower devices is desirable for
>> the user.
>>
>> Is this something that lwip can support? It is one reason why I have
>> advocating putting the state in a struct instead of having a lot of
>> separate vars.
>>
>> Regards,
>> Simon
>
>
> This functionality can be added. I do not see any restrictions implementing that.
> Added I mean to U-Boot. lwip will definitely work with it.
>
> There is no specific poll() for application. Application just do init() and request
> the needed packets (port, type etc, like sockets) and then common lwip poll()
> function is called.
>
> To implement background we need to periodically call eth_rx() and ulwip_poll() to feed lwip
> stack with rx packets when we are in the cmd shell. I see in some places we call schedule()
> to reprogram wdt, if we call rx polling loop in the similar way the app will work in the background.
>
> We might also want to support 2 applications at the same time. Like a telnet server
> and ping. Multiply applications also work with lwip.
>
> Even parallel download can save some time:
> wget -B
http://url1/zImage
> wget -B http//url2/dtb
> (-B = background)
>
> But I'm thinking if we can implement background in a more generic way in U-Boot cmd. Things like
> mount UBI fs, or download from SPI flash is slow. Or probably we can also do some loading while
> verifying the zImage checksum.
Yes, perhaps we can keep a record of the command that is running, with a little bit of state there. But does the stack support two wgets at once?
Regards,
Simon