No problem with 1.0.5. With 1.0.4, we added DNS entry and the problem gone. With 1.0.5, both name and IP are working fine. Thanks a lot. Kenneth From: address@hidden [mailto:address@hidden On Behalf Of Jehan Monnier
Sent: Tuesday, May 10, 2011 5:22 PM
To: address@hidden
Subject: Re: [Linphone-users] Linphone 1.0.4 for Iphone not working at all Hi Kenneth, Do you still observe this behavior on Linphone 1.0.5 ? Le 16 avr. 2011 à 19:41, Kenneth Yip a écrit :
Does that really matters? Version 1.0.3 works fine with IP address. Indeed, 1.0.4 always complain that WiFi connection does not exist where it actually does. Interesting did you have configured a proxy address ? If yes, can you replace the ip address by its corresponding domain name ? Le 15 avr. 2011 à 12:38, Kenneth Yip a écrit :
It is interesting that when the Linphone is running on iphone, the WiFi connection became not useable (however, the WiFi symbol on iphone still on), the phone became extremely slow and I cannot access anything using Safari. Once I kill Linphone, everything back clearing proxy config for [sip:xxx.xxx.xxx.xxx] linphone_core_is_mic_muted(): No current call !Audio (ring) MSTicker: We are late of 65 miliseconds.Audio (ring) MSTicker: We are late of 80 miliseconds.linphone_core_is_mic_muted(): No current call !Audio (ring) MSTicker: We are late of 62 miliseconds.Audio (ring) MSTicker: We are late of 101 miliseconds.Audio (ring) MSTicker: We are late of 106 miliseconds.[353280] frames of silence inserted for [44160] ms.Audio (ring) MSTicker: We are late of 92 miliseconds.Audio (ring) MSTicker: We are late of 101 miliseconds.ms_filter_unlink: MSFilePlayer:0x3935c0,0-->MSDtmfGen:0x397010,0ms_filter_unlink: MSDtmfGen:0x397010,0-->MSAUWrite:0x3970c0,0Audio (ring) MSTicker thread exitingkeepalive handler succesfully registeredConnect failed: Socket operation on non-socketbecomming active, make sure we are registeredMS ticker priority set to max (47)ms_filter_link: MSFilePlayer:0x3d1780,0-->MSDtmfGen:0x367ff0,0ms_filter_link: MSDtmfGen:0x367ff0,0-->MSAUWrite:0x346070,0Audio (ring) MSTicker: We are late of 84 miliseconds.Audio (ring) MSTicker: We are late of 123 miliseconds.Audio (ring) MSTicker: We are late of 84 miliseconds.Audio (ring) MSTicker: We are late of 105 miliseconds.Configuring audio session default route to speakerI/O unit latency [0.000000], quality [64]current hw output latency [0.011625] input [0.007500] iobuf[0.016000] sample rate [8000.000000] From: address@hidden [mailto:linphone-users-bounces+kkyyip=address@hidden] On Behalf Of Jehan Monnier
Sent: Friday, April 15, 2011 5:48 PM
To: address@hidden
Subject: Re: [Linphone-users] Linphone 1.0.4 for Iphone not working at all Can you help us troubleshooting ? Can you enable debug mode, restart Linphone, and collect traces from the console from the "More" menu ? Le 15 avr. 2011 à 11:11, Kenneth Yip a écrit : Linphone for iphone version 1.0.4 not working at all. Tested on IOS 4.3.1 and 4.2.1 with Iphone3GS. Linphone simply cannot detect the existence of a WiFi connection and failed to make or receive calls. Linphone for iphone 1.0.3 worked fine. _______________________________________________
Linphone-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/linphone-users
_______________________________________________
Linphone-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/linphone-users |