Re: [Linphone-developers] Flexsip/Address already in use

[Hajiba Ifrah]

I can't change the server, I need to use flexisip.

I tried to use other port : 6060 by editing the configuration file (flexisip.conf) : transports=149.202.194.24:6060;maddr=192.168.1.15

I still get the same error

Is this the correct methode to change the bind port?

2017-02-02 17:36 GMT+00:00 "A.Žukovič" <address@hidden>:

Hi,

maybe you try in the server with asterisk or another sip server start flexisip. change to another bind port. example 5069

> On 2. 2. 2017, at 18:31, Hajiba Ifrah <address@hidden> wrote:
>
> Hi,
>
>
> I installed and configured flexisp under debian jessie, my configuration file contains:
> Alias: 149.202.194.24 (my server's public address)
> Transport = sip *
>
> I tested this installation with my application which uses the linphone library to make calls, registration successfully, the call starts but without video and audio.
>
> The log displayed by flexisip is as follows:
>  2017-02-02 18: 24: 37: 726 flexisip-debug-New network: Name: lo Address: 127.0.0.1 Mask: 255.0.0.0
> 2017-02-02 18: 24: 37: 726 flexisip-debug-New network: Name: eth0 Address: 10.0.2.15 Mask: 255.255.255.0
> 2017-02-02 18: 24: 37: 726 flexisip-debug-New network: Name: eth1 Address: 192.168.1.15 Mask: 255.255.255.0
> 2017-02-02 18:24:37:76 flexisip-debug-New network: Name: lo Address: :: 1 Mask: ffff: ffff: ffff: ffff: ffff: ffff: ffff: ffff
> 2017-02-02 18:24:37:77 flexisip-debug-New network: Name: eth0 Address: fec0 :: 7427: 7eff: fedd: bbaa Mask: ffff: ffff: ffff: ffff ::
> 2017-02-02 18:24:37:77 flexisip-debug-New network: Name: eth0 Address: fe80 :: 7427: 7eff: fedd: bbaa% eth0 Mask: ffff: ffff: ffff: ffff ::
> 2017-02-02 18:24:37:77 flexisip-debug-New network: Name: eth1 Address: fe80 :: 6cdd: d3ff: fee0: b03d% eth1 Mask: ffff: ffff: ffff: ffff ::
> 2017-02-02 18: 24: 37: 727 flexisip-debug-nta_agent_create: initialized hash tables
> 2017-02-02 18: 24: 37: 727 flexisip-debug-nta_agent_create: initialized transports
> 2017-02-02 18: 24: 37: 727 flexisip-debug-nta_agent_create: initialized random identifiers
> 2017-02-02 18: 24: 37: 727 flexisip-debug-nta_agent_create: initialized timer
> 2017-02-02 18: 24: 37: 727 flexisip-debug-nta_agent_create: initialized resolver
> 2017-02-02 18: 24: 37: 728 flexisip-debug-Main tls certs dir: / etc / flexisip / tls
> 2017-02-02 18: 24: 37: 728 flexisip-debug-Enabling transport sip: *
> 2017-02-02 18: 24: 37: 728 flexisip-debug-tport_create (): 0x1f24700
> 2017-02-02 18: 24: 37: 728 flexisip-debug-nta: master transport created
> 2017-02-02 18: 24: 37: 728 flexisip-debug-tport_bind_server (0x1f24700) to * / *: 5060
> 2017-02-02 18: 24: 37: 728 flexisip-debug-tport_bind_server (0x1f24700): calling tport_listen for udp
> 2017-02-02 18: 24: 37: 728 flexisip-debug-tport_alloc_primary (0x1f24700): new primary tport 0x1f24f90
> 2017-02-02 18: 24: 37: 728 flexisip-debug-tport_listen (0x1f24700): bind (pf = 2 udp / [10.0.2.15]: 5060): Address already in use
> 2017-02-02 18: 24: 37: 728 flexisip-debug-nta: bind (*: 5060; transport = *): Address already in use
> 2017-02-02 18: 24: 37: 728 flexisip-error-Could not enable sip: *: Address already in use
> No sip transport defined.
>
> any help?
> Thanks.
>
> Best Regards

> _______________________________________________
> Linphone-developers mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/linphone-developers


_______________________________________________
Linphone-developers mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/linphone-developers