Re: [Libreboot] [Patch V3][ 2/2] coreboot-libre: make it path independant.

[Denis 'GNUtoo' Carikli]

On Tue, 24 Nov 2015 22:32:29 +0100
Denis 'GNUtoo' Carikli <address@hidden> wrote:

> This way it can be used on any coreboot directory.
> The script is expected to run inside coreboot's top directory.
Here's a lot of ./download all:

> 1 address@hidden ~/x86/libreboot/libreboot (git)-[master]
> % ./download all                     :( Use "./download --noconfirm"
> or "./download -y" if you want to be rid of these confirmation
> dialogues.
> 
> Downloading bucts
> Cloning into 'bucts'...
> remote: Counting objects: 18, done.
> remote: Compressing objects: 100% (17/17), done.
> remote: Total 18 (delta 3), reused 0 (delta 0)
> Receiving objects: 100% (18/18), 4.32 KiB | 0 bytes/s, done.
> Resolving deltas: 100% (3/3), done.
> Checking connectivity... done.
> Patching bucts to not require git for building
> HEAD is now at dc27919 Make bucts compile on FreeBSD using gmake
> Applying: Makefile: don't use git
> 
> 
> Use "./download --noconfirm" or "./download -y" if you want to be rid
> of these confirmation dialogues.
> 
> Downloading coreboot, patching coreboot and deblobbing coreboot
> Cloning into 'coreboot'...
> remote: Counting objects: 28116, done
> remote: Finding sources: 100% (12766/12766)
> remote: Total 255928 (delta 3567), reused 249187 (delta 3567)
> Receiving objects: 100% (255928/255928), 67.98 MiB | 48.00 KiB/s,
> done. Resolving deltas: 100% (193065/193065), done.
> Checking connectivity... done.
> Checking out files: 100% (14607/14607), done.
> HEAD is now at 33fb4cf northbridge/amd/amdfam10: Fix typo in comment
> Submodule 'vboot' (http://review.coreboot.org/vboot.git) registered
> for path '3rdparty/vboot' Cloning into '3rdparty/vboot'...
> remote: Counting objects: 1340, done
> remote: Finding sources: 100% (158/158)
> remote: Total 19146 (delta 62), reused 19096 (delta 62)
> Receiving objects: 100% (19146/19146), 37.11 MiB | 68.00 KiB/s, done.
> Resolving deltas: 100% (12554/12554), done.
> Checking connectivity... done.
> Submodule path '3rdparty/vboot': checked out
> 'fbf631c845c08299f0bcbae3f311c5807d34c0d6' HEAD is now at fbf631c
> crossystem: Add check for "mkbp" back firmware: Developer mode
> timeout delay shortening (down to 3 seconds) Applying: firmware:
> Developer mode timeout delay shortening (down to 3 seconds) firmware:
> Text-based screen display in priority Applying: firmware: Text-based
> screen display in priority firmware: NV context pointer handoff to
> VbExDisplayScreen Applying: firmware: NV context pointer handoff to
> VbExDisplayScreen firmware: Hold key combination in developer mode
> Applying: firmware: Hold key combination in developer mode
> firmware: Screen blank and wait at disabled USB boot warning
> Applying: firmware: Screen blank and wait at disabled USB boot warning
> firmware: Separate screen and wait at device information screen
> Applying: firmware: Separate screen and wait at device information
> screen firmware: Localization keys removal
> Applying: firmware: Localization keys removal
> mainboard/lenovo/t400: Add initial hybrid graphics support
> Applying: mainboard/lenovo/t400: Add initial hybrid graphics support
> NOTFORMERGE: lenovo/t400: hard-code enable integrated-only video
> Applying: NOTFORMERGE: lenovo/t400: hard-code enable integrated-only
> video lenovo/x60: use correct BLC_PWM_CTL value
> Applying: lenovo/x60: use correct BLC_PWM_CTL value
> lenovo/t60: Enable brightness controls (native graphics)
> Applying: lenovo/t60: Enable brightness controls (native graphics)
> ec/lenovo/h8: permanently enable
> wifi/trackpoint/touchpad/bluetooth/wwan Applying: NOTFORMERGE:
> ec/lenovo/h8: wlan/trackpoint/touchpad/bluetooth/wwan
> northbridge/gm45/raminit.c: enable GS45 high-perf (i.e. add X200S
> support to libreboot) Applying: northbridge/gm45/raminit.c: enable
> GS45 high-performance mode ThinkPad R400 support (clone of the T400)
> Applying: lenovo/r400: Add clone of Lenovo T400 ThinkPad T500
> (depends on T400 patch) Applying: lenovo/t500: Add clone of Lenovo
> T400 chromeos: Allow disabling vboot firmware verification when
> ChromeOS is enabled Applying: chromeos: Allow disabling vboot
> firmware verification when ChromeOS is enabled Applying:
> southbridge/amd/sb700: Allow use of auxiliary SMBUS controller
> Applying: drivers/i2c/w83795: Add full support for core functions
> Applying: drivers/i2c/w83795: Add option to use auxiliary SMBUS
> controller Applying: mainboard: Update mainboards using the w83795
> sensor device Applying: drivers/aspeed: Add native text mode VGA
> support for the AST2050 .git/rebase-apply/patch:3335: new blank line
> at EOF. + warning: 1 line adds whitespace errors.
> Applying: southbridge/amd/sb700: Fix boot hang on ASUS KGPE-D16
> Applying: southbridge/amd/sr5650: Fix boot failure on ASUS KGPE-D16
> Applying: cpu/amd: Add initial support for AMD Socket G34 processors
> Applying: northbridge/amd/amdmct: Fix broken AMD K10 DDR3 memory
> initalization .git/rebase-apply/patch:2293: space before tab in
> indent. pDCTstat->CH_D_B_RCVRDLY[Channel][Receiver >> 1][lane] =
> current_total_delay[lane]; warning: 1 line adds whitespace errors.
> Applying: northbridge/amd/amdmct/mct_ddr3: Fix curly brace style
> violations Applying: northbridge/amd/amdfam10: Limit maximum RAM
> clock to BKDG recommendations Applying: device/hypertransport: Add
> additional debug output Applying: mainboard/asus/kgpe-d16: Add
> initial support for the KGPE-D16 .git/rebase-apply/patch:897: space
> before tab in indent. device pci 14.0 on                      # SM
> .git/rebase-apply/patch:3108: space before tab in indent.
>               dump_smbus_registers();
> warning: 2 lines add whitespace errors.
> Applying: mainboard/asus/kgpe-d16: Add nvram option to enable/disable
> the IEEE1394 controller Applying: cpu/amd/model_10xxx: Clean up
> debugging statements Applying: southbridge/amd/sb700: Add Suspend to
> RAM (S3) support Applying: superio/nuvoton/nct5572d: Enable power
> state after power failure support Applying: mainboard/asrock/e350m1:
> Update CMOS layout to match SIO changes Applying:
> northbridge/amd/amdfam10: Add Suspend to RAM (S3) Flash data storage
> area Applying: northbridge/amd/amdmct/mct_ddr3: Add initial Suspend
> to RAM (S3) support Applying: cpu/amd/car: Add initial Suspend to RAM
> (S3) support Applying: mainboard/asus/kgpe-d16: Add initial Suspend
> to RAM (S3) support Applying: include/smbios: Update SMBIOS memory
> structures to version 2.8 Applying: northbridge/amd/amdfam10: Set
> DIMM voltage based on SPD data Applying: mainboard/asus/kgpe-d16: Set
> DDR3 memory voltage based on SPD data Applying: src/console: Add x86
> romstage spinlock option and prink spinlock support Applying:
> northbridge/amd/amdmct/mct_ddr3: Fix S3 suspend overrunning the stack
> size limit Applying: lib/stack: Add stack overrun detection Applying:
> cpu/x86/lapic: Add stack overrun detection Applying:
> southbridge/amd/sr5650: Add AMD Family 15h CPU support Applying:
> cpu/amd: Move model_10xxx to
> family_10h-family_15h .git/rebase-apply/patch:478: space before tab
> in indent. /* [3:0] RspTok = 0001b */ .git/rebase-apply/patch:999:
> space before tab in indent. printk(BIOS_ERR,"P-state info in
> MSRC001_0064 is invalid !!!\n"); .git/rebase-apply/patch:1029: space
> before tab in indent. */ .git/rebase-apply/patch:1107: space before
> tab in indent. dword |= PW_STP_UP50 | PW_STP_DN50 ;
> .git/rebase-apply/patch:1136: space before tab in indent.
>               device_t dev = NODE_PCI(node, 3);
> warning: squelched 23 whitespace errors
> warning: 28 lines add whitespace errors.
> Applying: cpu/amd/family_10h-family_15h: Use correct label for break
> state Applying: cpu/amd: Add initial AMD Family 15h support
> .git/rebase-apply/patch:1202: space before tab in indent.
>       uint8_t skip_wait;
> .git/rebase-apply/patch:1227: space before tab in indent.
>               waitCurrentPstate(nonBoostedPState);
> .git/rebase-apply/patch:1773: space before tab in indent.
>                       wrmsr(0x00000200 | i, msr);
> .git/rebase-apply/patch:1774: space before tab in indent.
>               }
> .git/rebase-apply/patch:1776: space before tab in indent.
>               enable_cache();
> warning: squelched 8 whitespace errors
> warning: 13 lines add whitespace errors.
> Applying: mainboard/asus/kgpe-d16: Add initial Family 15h CPU support
> Applying: cpu/amd/family_10h-family_15h: Add Family 15h microcode file
> Applying: amdmct/mct_ddr3: Disable Fam10h-specific MTRR setup on
> Fam15h Applying: cpu/amd/car: Add romstage BSP stack overrun detection
> Applying: cpu/amd/car: Increase Family 10h CAR size limit to 128k
> Applying: cpu/amd/car: Move AP stacks below the BSP stack to free up
> space Applying: northbridge/amd/amdmct: Read SPD data into cache to
> decrease bootup time Applying: cpu/amd/car: Initialize entire CAR
> space instead of only half Applying: amd/amdmct/mct_ddr3: Improve SPD
> DIMM detect reliability Applying: amd/amdmct/mct_ddr3: Use training
> values from previous boot if possible Applying:
> northbridge/amd/amdfam10: Enable CC6 DRAM save area setup Applying:
> mainboard/asus/kgpe-d16: Enable CC6 Applying: cpu/amd: Add CC6 support
> Applying: northbridge/amd/amdmct: Skip DCT config write to Flash if
> unchanged Applying: southbridge/amd/sb700: Add AHCI support
> Applying: mainboard/asus/kgpe-d16: Properly initialize SB700 SATA PHYs
> Applying: southbridge/amd/sb700: Disable broken SATA MSI functionality
> Applying: southbridge/amd/sb700: Indicate iSATA/eSATA port type
> Applying: northbridge/amd/amdfam10: Add ability to set maximum
> P-state limit Applying: northbridge/amd/amdmct: Verify MCT NVRAM
> options before skipping training Applying:
> src/northbridge/amd/amdmct: Add option to override bad SPD checksum
> Applying: mainboard/asus/kgpe-d16: Add missing IRQ routing for PIKE
> card Applying: northbridge/amd/amdmct: Fix hang on boot due to
> invalid array access Applying: southbridge/amd/sr5650: Fix GPP3a link
> training in higher width modes Applying: southbridge/amd/sr5650: Add
> optional delay after link training Applying: mainboard/asus/kgpe-d16:
> Properly configure SR5690 southbridge PIKE slot Applying:
> southbridge/amd/sb700: Add option to disable SATA ALPM Applying:
> mainboard/asus/kgpe-d16: Set SP5100 subtype Applying:
> northbridge/amd/amdmct: Fix crash on startup due to NULL pointer
> access Applying: northbridge/amd/amdmct: Clear memory before enabling
> ECC Applying: southbridge/amd/sb700: Do drive detection even in AHCI
> mode Applying: src/southbridge/amd/sb700: Reset SATA controller in
> AHCI mode during startup Applying: southbridge/amd/sb700: Recover if
> AHCI disk detection fails Applying: southbridge/amd/sb700: Fix SATA
> port 4/5 drive detection Applying: southbridge/amd/sb700: Fix random
> persistent SATA AHCI drive detection failure Applying:
> northbridge/amd/amdmct/mct_ddr3: Fix lockups and wasted time during
> ECC init Applying: cpu/amd: Fix AMD Family 15h ECC initialization
> reliability issues Applying: northbridge/amd/amdfam10: Properly
> indicate node and channel in SMBIOS tables Applying:
> amd/amdmct/mct_ddr3: Add Family 15h RDIMM timing and ODT values
> Applying: northbridge/amd/amdmct/mct_ddr3: Attempt to recover from
> phy training errors Applying: northbridge/amd/amdmct/mct_ddr3: Work
> around strange phy training issue Applying:
> northbridge/amd/amdmct/mct_ddr3: Add additional debug trace
> statements Applying: northbridge/amd/amdmct/mct_ddr3: Fix null
> pointer access and related hangs Applying:
> northbridge/amd/amdmct/mct_ddr3: Add missing Family 15h RDIMM Rtt
> values Applying: northbridge/amd/amdmct/mct_ddr3: Set SkewMemClk when
> both DCTs are in use Applying: northbridge/amd/amdmct/mct_ddr3:
> Properly indicate clobbered registers Applying:
> northbridge/amd/amdmct/mct_ddr3: Fix Family 10h boot failure
> Applying: src/southbridge/amd/sr5650: Always configure lane director
> on startup Applying: cpu/amd/family_10h-family_15h: Fix BSP stack
> corruption on 32-core Fam10 systems Applying:
> northbridge/amd/amdmct/mct_ddr3: Fix RDIMM errors due to undefined
> number of slots Applying: amd/amdmct/mct_ddr3: Partially fix up
> registered DIMMs on Fam10h Applying: northbridge/amd/amdmct: Fix
> Family 15h detection Applying: northbridge/amd/amdmct: Reduce maximum
> number of DDR3 DIMMs Applying: northbridge/amd/amdmct/mct_ddr3: Add
> registered and x4 DIMM support to Fam15h Applying:
> cpu/amd/family_10h-family_15h: Fix Family 15h multiple package
> support Applying: northbridge/amd/amdfam10: Add probe filter support
> Applying: cpu/amd/family_10h-family_15h: Bring initial HT register
> configuration in line with BKDG .git/rebase-apply/patch:202: space
> before tab in indent. P0XmtRdPtr = 0x2 .git/rebase-apply/patch:203:
> space before tab in indent. P1RcvRdPtr =
> 0xa .git/rebase-apply/patch:204: space before tab in indent.
> P1XmtRdPtr = 0x0 */ .git/rebase-apply/patch:210: space before tab in
> indent. P0XmtRdPtr = 0x2 .git/rebase-apply/patch:211: space before
> tab in indent. P1RcvRdPtr = 0xa warning: squelched 7 whitespace
> errors warning: 12 lines add whitespace errors. Applying:
> northbridge/amd/amdmct/mct_ddr3: Move K10D configuration into
> separate file Applying: mainboard/asus/kgpe-d16: Fix I/O link
> detection Applying: cpu/amd/family_10h-family_15h: Set northbridge
> throttle values Applying: cpu/amd/family_10h-family_15h: Fix
> incorrect revision detection Applying: northbridge/amd/amdht: Add
> support for HT3 2.8GHz and up link frequencies Applying:
> amd/family_10h-family_15h: Fix poor performance on Family 15h CPUs
> Applying: amd/amdmct/mct_ddr3: Fix poor performance on Family 15h
> CPUs Applying: northbridge/amd/amdht: Fix poor performance on Family
> 15h CPUs Applying: northbridge/amd/amdfam10: Fix poor performance on
> Family 15h CPUs Applying: cpu/amd/family_10h-family_15h: Configure NB
> register 2 Applying: cpu/amd/family_10h-family_15h: Set up link XCS
> token counts on Family 15h Applying: northbridge/amd/amdmct/mct_ddr3:
> Force retraining on every boot Applying: northbridge/amd/amdfam10:
> Fix invalid NUMA table Applying: northbridge/amd/amdfam10: Add Family
> 15h cache partitioning support Applying: amd/amdmct/mct_ddr3: Set
> prefetch double stride to improve performance Applying:
> cpu/amd/family_10h-family_15h: Set up Family 15h Link Base Channel
> Buffer Count registers Applying: cpu/amd/family_10h-family_15h: Set
> up cache controls on Family 15h to improve
> performance .git/rebase-apply/patch:17: space before tab in indent.
> PfcStrideMul]=0x3 */ warning: 1 line adds whitespace errors.
> Applying: cpu/amd/family_10h-family_15h: Set up SRI to XCS Token
> Count registers on Family 15h Applying: amd/amdfam10: Control Family
> 15h cache partitioning and memory performance via nvram Applying:
> northbridge/amd/amdht: Add isochronous setup support for coherent
> fabric Applying: arch/x86/acpi: Add IVRS table generation routines
> Applying: southbridge/amd/sr5650: Add IOMMU support Applying:
> southbridge/amd/sr5650: Hide clock configuration device after setup
> is complete Applying: northbridge/amd/amdfam10: Rename mislabeled
> iommu nvram option to gart Applying: northbridge/amd/amdfam10: Fix
> gart setup not working on Family 15h processors Applying:
> mainboard/asus/kgpe-d16: Add several nvram configuration options
> Applying: southbridge/amd/sr5650: Use correct PCI configuration block
> offset Applying: southbridge/amd/sr5650: Add MCFG ACPI table support
> Applying: southbridge/amd/sb700: Fix mismatched FADT entries
> Applying: southbridge/amd/sb700: Fix drifting system clock Applying:
> northbridge/amd/amdmct/mct_ddr3: Add cc6 setup information messages
> Applying: northbridge/amd/amdfam10: Work around sporadic lockups when
> CC6 enabled Applying: northbridge/amd/amdmct/mct_ddr3: Ensure channel
> clock skew is properly set up Applying:
> northbridge/amd/amdmct/mct_ddr3: Add DDR3 termination debug output
> Applying: northbridge/amd/amdmct/mct_ddr3: Fix a minor RDIMM CS
> select error Applying: northbridge/amd/amdmct/mct_ddr3: Fix odd rank
> data corruption due to incorrect DQS training Applying:
> northbridge/amd/amdmct/mct_ddr3: Use antiphase to better center DQS
> window Applying: northbridge/amd/amdmct/mct_ddr3: Fix broken support
> for multiple DIMMs on single channel Applying: drivers/pc80: Add
> optional spinlock for nvram CBFS access Applying:
> mainboard/asus/kgpe-d16: Enable CBFS spinlocks Applying:
> cpu/amd/microcode: Introduce CBFS access spinlock to avoid IOMMU
> failure Applying: mainboard/asus/kgpe-d16: Limit HT speed to 2.6GHz
> Applying: cpu/amd/family_10h-family_15h: Apply missing Family 15h
> errata fixes Applying: northbridge/amd/amdmct/mct_ddr3: Use
> StopOnError to decrease training time .git/rebase-apply/patch:196:
> space before tab in indent. uint16_t ren_step = 0x40; warning: 1 line
> adds whitespace errors. Applying: mainboard/asus/kgpe-d16: Enable
> GART by default Applying: northbridge/amd/amdfam10: Fix incorrect
> channel buffer count configuration Applying:
> cpu/amd/family_10h-family_15h: Force iolink detect to either 1 or 0
> Applying: northbridge/amd/amdht: Fix XCS buffer count setup on AMD
> Family 15h CPUs Applying: cpu/amd/family_10h-family_15h: Fix link
> type detection and XCS buffer count setup Applying:
> cpu/amd/family_10h-family_15h: Enable DFE on Family 15h HT3 links
> Applying: cpu/amd/family_10h-family_15h: Fix build when microcode not
> included Applying: device/smbus: Avoid infinite loop if i2c device
> has wrong parent Applying: NOTFORMERGE: don't add CPU microcode on
> fam10h to fam15h (AMD) Deleting .git* in coreboot/ (history
> inside .git contains the blobs that were deleted) Deblobbing coreboot
> Deleting blobs in coreboot
> 
> 
> 
> 
> Use "./download --noconfirm" or "./download -y" if you want to be rid
> of these confirmation dialogues.
> 
> Downloading depthcharge
> Cloning into 'depthcharge'...
> remote: Counting objects: 935, done
> remote: Finding sources: 100% (23/23)
> remote: Total 16734 (delta 9475), reused 16726 (delta 9475)
> Receiving objects: 100% (16734/16734), 6.82 MiB | 51.00 KiB/s, done.
> Resolving deltas: 100% (9475/9475), done.
> Checking connectivity... done.
> HEAD is now at 3a5d54e Sound: Add RT5645 codec driver
> arm: armv7-a march abi flag for ARMv7 hardware
> Applying: arm: armv7-a march abi flag for ARMv7 hardware
> Coreboot image integration removal
> Applying: Coreboot image integration removal
> DOTCONFIG location correction
> Applying: DOTCONFIG location correction
> Adaptation for a read-only boot path when no vboot handoff data is
> found Applying: Adaptation for a read-only boot path when no vboot
> handoff data is found Proper firmware index report for read-only boot
> path Applying: Proper firmware index report for read-only boot path
> fdt: nonvolatile-context-storage report to mkbp for EC NV storage
> Applying: fdt: nonvolatile-context-storage report to mkbp for EC NV
> storage vboot: Display callbacks for developer and recovery mode
> screens Applying: vboot: Display callbacks for developer and recovery
> mode screens
> 
> 
> Use "./download --noconfirm" or "./download -y" if you want to be rid
> of these confirmation dialogues.
> 
> Downloading flashrom
> Cloning into 'flashrom'...
> remote: Counting objects: 9082, done.
> remote: Compressing objects: 100% (9/9), done.
> remote: Total 9082 (delta 1), reused 0 (delta 0), pack-reused 9073
> Receiving objects: 100% (9082/9082), 8.26 MiB | 39.00 KiB/s, done.
> Resolving deltas: 100% (5651/5651), done.
> Checking connectivity... done.
> HEAD is now at 80c9382 dediprog: Tidy up commands and remove dead
> nonsense code. Enabling whitelist for X200S, X200 Tablet, T400, T500
> and R400 patching file board_enable.c
> Enabling whitelist for Libiquity Taurinus X200
> patching file board_enable.c
> Hunk #1 succeeded at 2436 (offset 3 lines).
> Patching flashchips.c to remove the redundant entries
> patching file flashchips.c
> 
> 
> Use "./download --noconfirm" or "./download -y" if you want to be rid
> of these confirmation dialogues.
> 
> Downloading GRUB
> Cloning into 'grub'...
> remote: Counting objects: 88511, done.
> remote: Compressing objects: 100% (20524/20524), done.
> remote: Total 88511 (delta 65889), reused 88281 (delta 65756)
> Receiving objects: 100% (88511/88511), 69.00 MiB | 56.00 KiB/s, done.
> Resolving deltas: 100% (65889/65889), done.
> Checking connectivity... done.
> HEAD is now at 7a21030 Fix missing byte order conversion in
> get_btrfs_fs_prefix function Applying: grub-core/normal/main.c:
> Display "FREE AS IN FREEDOM", not version Applying: Cryptomount
> support LUKS detached header Applying: Cryptomount support key files
> Applying: Cryptomount luks allow multiple passphrase attempts
> Applying: Cryptomount support plain dm-crypt
> Applying: Cryptomount support for hyphens in UUID
> Applying: grub-core/disk/cryptodisk.c: Point to const char
> 
> 
> Use "./download --noconfirm" or "./download -y" if you want to be rid
> of these confirmation dialogues.
> 
> Downloading MemTest86+
> --2015-11-24 22:14:41--
> http://www.memtest.org/download/5.01/memtest86+-5.01.tar.gz Resolving
> www.memtest.org (www.memtest.org)... 176.31.245.160 Connecting to
> www.memtest.org (www.memtest.org)|176.31.245.160|:80... connected.
> HTTP request sent, awaiting response... 200 OK Length: 214877 (210K)
> [application/x-gzip] Saving to: ‘memtest86+-5.01.tar.gz’
> 
> memtest86+-5.01.tar.gz    100%[====================================>]
> 209.84K  13.7KB/s   in 14s    
> 
> 2015-11-24 22:14:56 (15.3 KB/s) - ‘memtest86+-5.01.tar.gz’ saved
> [214877/214877]
> 
> Valid checksum for memtest86plus
> 
> 
> Use "./download --noconfirm" or "./download -y" if you want to be rid
> of these confirmation dialogues.
> 
> Downloading SeaBIOS
> Cloning into 'seabios'...
> remote: Counting objects: 13610, done.
> remote: Compressing objects: 100% (7234/7234), done.
> remote: Total 13610 (delta 10924), reused 7793 (delta 6369)
> Receiving objects: 100% (13610/13610), 2.84 MiB | 17.00 KiB/s, done.
> Resolving deltas: 100% (10924/10924), done.
> Checking connectivity... done.
> HEAD is now at 6bcacf7 Fix typos found by codespell
> 
> 
> ./download all  126.42s user 40.06s system 4% cpu 58:30.03 total
> address@hidden ~/x86/libreboot/libreboot (git)-[master] % git diff
> address@hidden ~/x86/libreboot/libreboot (git)-[master] % git log
> --oneline origin/master..HEAD 8e6582e coreboot-libre: make it path
> independant. bcff34a docs: maintain: clarify what findblob does

Denis.

pgpAALy5N48w1.pgp
Description: OpenPGP digital signature