Re: Grub on BIOS/GPT

[David Ventura]

Hm, grub-bios-setup also seems to not want to apply on files/loop devices:

$ grub-bios-setup -s -d asd -b boot.img -c core.img hdd-grub.raw
grub-bios-setup: warning: disk does not exist, so falling back to
partition device /dev/vda2.
grub-bios-setup: warning: disk does not exist, so falling back to
partition device /dev/vda2.
grub-bios-setup: error: guessing the root device failed, because of
`disk `hostdisk//dev/vda2' not found'.

$ grub-bios-setup -s -d asd -b boot.img -c core.img /dev/loop13
grub-bios-setup: error: disk `hostdisk//dev/loop13' not found.

Any suggestions?

I'll try to hack on grub-bios-setup, to get it to not look at disks
and instead read the input file. Doubt I'll be successful, but my
initial plan of "just stomping the jump address of boot.img" did not
pan out



On Mon, 21 Feb 2022 at 12:29, Andrei Borzenkov <arvidjaar@gmail.com> wrote:
>
> On Mon, Feb 21, 2022 at 1:45 PM David Ventura <davidventura27@gmail.com> 
> wrote:
> >
> > The machines I'll boot support this, so it's fine. (And they'll only
> > ever boot Linux, so no need for hybrid MBR).
> >
> > Using grub-install also expects to read the device.map from my disk
> > and write to /boot/grub/i386-pc on my disk.
> > I understand how this makes sense for the use-case grub-install is
> > intended for, and how I'm fairly outside of it.
> >
>
> You could try grub-bios-setup which installs grub image onto the
> device. grub-install does it as one of the steps it executes.
>
> > I'm trying to generate thousands of disk images for various tests on
> > real systems, and for each I know specifically what disk layout
> > they'll have, the address of the bios boot partition, path to grub
> > files, etc.
> >
> > On Mon, 21 Feb 2022 at 11:17, Pascal Hambourg <pascal@plouf.fr.eu.org> 
> > wrote:
> > >
> > > Le 21/02/2022 à 10:11, David Ventura a écrit :
> > > >
> > > > I'm not sure how to do that; running grub-install with either a file
> > > > or a loop device as  target gets ignored and instead targets my
> > > > primary disk:
> > > >
> > > > $ grub-install -vvv /dev/loop13
> > > > grub-install: info: executing modprobe efivars 2>/dev/null.
> > > > grub-install: info: Looking for /sys/firmware/efi ...
> > > > grub-install: info: ...found.
> > > > Installing for x86_64-efi platform.
> > >
> > > The target device is ignored because grub-install detects an EFI
> > > platform and defaults to install for EFI boot. You must force BIOS
> > > platform with --target=i386-pc.
> > >
> > > > On top of that, I'm building a franken-disk that can boot both in
> > > > BIOS/GPT and UEFI/GPT with a bios boot partition and Grub in the ESP.
> > > > I'm not sure if grub-install would be confused by this, or just work.
> > > > Do you have any suggestions for this?
> > >
> > > I observed that some BIOS platforms won't boot if the boot flag is not
> > > set on a partition entry of the MBR ; conversely, some UEFI platforms
> > > won't boot if the boot flag is set on the GPT partition entry of the
> > > MBR. Workaround : create a hybrid/DOS MBR or set the boot flag on an
> > > empty partition entry of the MBR.
> >
> >
> >
> > --
> > Stack is the new term for "I have no idea what I'm actually using".
> >



--
Stack is the new term for "I have no idea what I'm actually using".