help-grub
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: error: no such disk


From: Tom H
Subject: Re: error: no such disk
Date: Thu, 24 Dec 2009 23:09:02 +0100

> I'm having trouble getting grub 2 to work. I've tried installing 2
> different distros of Linux (Fedora 12 & Ubuntu 9.10), but grub hasn't
> worked on either. I'm getting "error: no such disk", followed by a
> grub rescue prompt. When I do "ls" at this prompt, I see this:
>
> (hd0) (hd0,1) (hd0,2) (hd1,1) (hd1,2) (hd1,3) (hd1,4)
>
> This seems perfectly reasonable. My setup is as follows:
>
> 2 ATA hard drives:
> /dev/sda (hd0) "master"
>    /dev/sda1 (hd0,1) fat32 - Windows XP backup partitionDisk
> /dev/sda: 40.0 GB, 40020664320 bytes
>    /dev/sda2 (hd0,2) ntfs - Windows XP
> /dev/sdb (hd1) "slave"
>    /dev/sdb1 (hd1,1) ntfs - storage space
>    /dev/sdb2 (hd1,2) ext2 - /boot - uuid=d53965e1-bcb1-4158-8531-193af32d52e7
>    /dev/sdb3 (hd1,3) swap
>    /dev/sdb4 (hd1,4) ext4 - / - uuid=17a9cefd-3754-4048-9aa9-93dc7967a107
>
> Output from "fdisk -l":
>
> Disk /dev/sda: 40.0 GB, 40020664320 bytes
> 255 heads, 63 sectors/track, 4865 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> Disk identifier: 0xe156a499
>
> Device Boot      Start         End      Blocks   Id  System
> /dev/sda1               1         595     4779306    b  W95 FAT32
> /dev/sda2   *         596        4865    34298775    7  HPFS/NTFS
>
> Disk /dev/sdb: 251.0 GB, 251000193024 bytes
> 255 heads, 63 sectors/track, 30515 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> Disk identifier: 0x43393f15
>
> Device Boot      Start         End      Blocks   Id  System
> /dev/sdb1               1       28684   230400000    7  HPFS/NTFS
> /dev/sdb2   *       28685       28708      192780   83  Linux
> /dev/sdb3           28709       28890     1461915   82  Linux swap / Solaris
> /dev/sdb4           28891       30515    13052812+  83  Linux
>
> GRUB is installed on the mbr of hd0, which is the drive the BIOS boots
> from. I've attached my grub.cfg and device.map file. The device.map
> file looks correct to me. At the start of the cfg file, grub seems to
> be setting up the graphics, for which it needs a font on /dev/sdb4,
> which is ext4. I see it uses insmod ext2. Is this right?
>
> I've tried to fix the problem with a liveCD by chrooting into those
> partitions and doing update-grub, then grub-install /dev/sda. I'm
> using GNU GRUB 1.97~beta4.

The "set root=(hd1,4)" and "search --no-floppy --fs-uuid --set
17a9cefd-3754-4048-9aa9-93dc7967a107" lines at the top of your
grub.cfg are incorrect.

They should be "set root=(hd1,2)" and "search --no-floppy --fs-uuid
--set d53965e1-bcb1-4158-8531-193af32d52e7" (like within the menuentry
entries).




reply via email to

[Prev in Thread] Current Thread [Next in Thread]