[Guile-commits] 10/437: add more autotools-generated files

[Andy Wingo]

wingo pushed a commit to branch lightning
in repository guile.

commit 8bf84764e27045ecc53821c491db4aa55731ba2c
Author: Paolo Bonzini <address@hidden>
Date:   Thu Nov 11 13:11:22 2004 +0000

    add more autotools-generated files
    
    git-archimport-id: address@hidden/lightning--stable--1.2--patch-10
---
 config.h.in        |  43 +++++++
 config/install-sh  | 322 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 doc/lightningize.1 |  45 ++++++++
 3 files changed, 410 insertions(+)

diff --git a/config.h.in b/config.h.in
new file mode 100644
index 0000000..9367e70
--- /dev/null
+++ b/config.h.in
@@ -0,0 +1,43 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if you have the `memcpy' function. */
+#undef HAVE_MEMCPY
+
+/* Define if test programs should not run the compiled code */
+#undef LIGHTNING_CROSS
+
+/* Define if the test programs should disassemble the code they produce */
+#undef LIGHTNING_DISASSEMBLE
+
+/* Define if lightning is targeting the x86 architecture */
+#undef LIGHTNING_I386
+
+/* Define if lightning is targeting the x86 architecture */
+#undef LIGHTNING_PPC
+
+/* Define if lightning is targeting the x86 architecture */
+#undef LIGHTNING_SPARC
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to enable assertions */
+#undef _ASM_SAFETY
diff --git a/config/install-sh b/config/install-sh
new file mode 100755
index 0000000..b777f12
--- /dev/null
+++ b/config/install-sh
@@ -0,0 +1,322 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2004-07-05.00
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -c) shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit 0;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t) dstarg=$2
+       shift
+       shift
+       continue;;
+
+    -T) no_target_directory=true
+       shift
+       continue;;
+
+    --version) echo "$0 $scriptversion"; exit 0;;
+
+    *)  # When -d is used, all remaining arguments are directories to create.
+       # When -t is used, the destination is already specified.
+       test -n "$dir_arg$dstarg" && break
+        # Otherwise, the last argument is the destination.  Remove it from 
address@hidden
+       for arg
+       do
+          if test -n "$dstarg"; then
+           # $@ is not empty: it contains at least $arg.
+           set fnord "$@" "$dstarg"
+           shift # fnord
+         fi
+         shift # arg
+         dstarg=$arg
+       done
+       break;;
+  esac
+done
+
+if test -z "$1"; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    src=
+
+    if test -d "$dst"; then
+      mkdircmd=:
+      chmodcmd=
+    else
+      mkdircmd=$mkdirprog
+    fi
+  else
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+       echo "$0: $dstarg: Is a directory" >&2
+       exit 1
+      fi
+      dst=$dst/`basename "$src"`
+    fi
+  fi
+
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+  # Make sure that the destination directory exists.
+
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+        '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set - `echo "$dstdir" | sed -e 's@/@address@hidden' -e 'address@hidden@/@'`
+    IFS=$oIFS
+
+    pathcomp=
+
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp"
+       # mkdir can fail with a `File exist' error in case several
+       # install-sh are creating the directory concurrently.  This
+       # is OK.
+       test -d "$pathcomp" || exit
+      fi
+      pathcomp=$pathcomp/
+    done
+  fi
+
+  if test -n "$dir_arg"; then
+    $doit $mkdircmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+  else
+    dstfile=`basename "$dst"`
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+    trap '(exit $?); exit' 1 2 13 15
+
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+          # The rename failed, perhaps because mv can't rename something else
+          # to itself, or perhaps because mv is so ancient that it does not
+          # support -f.
+
+          # Now remove or move aside any old file at destination location.
+          # We try this two ways since rm can't unlink itself on some
+          # systems and the destination file might be busy for other
+          # reasons.  In this case, the final cleanup might fail but the new
+          # file should still install successfully.
+          {
+            if test -f "$dstdir/$dstfile"; then
+              $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+              || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+              || {
+                echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+                (exit 1); exit
+              }
+            else
+              :
+            fi
+          } &&
+
+          # Now rename the file to the real destination.
+          $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+        }
+    }
+  fi || { (exit 1); exit; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+  (exit 0); exit
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/doc/lightningize.1 b/doc/lightningize.1
new file mode 100644
index 0000000..bfa8a7d
--- /dev/null
+++ b/doc/lightningize.1
@@ -0,0 +1,45 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.28.
+.TH LIGHTNINGIZE "1" "November 2004" "lightningize 1.2a" "User Commands"
+.SH NAME
+lightningize \- manual page for lightningize 1.2a
+.SH SYNOPSIS
+.B lightningize
+[\fIOPTION\fR]...
+.SH DESCRIPTION
+Prepare a package to use lightning.
+.TP
+\fB\-\-automake\fR
+work silently, and assume that Automake is in use
+.TP
+\fB\-c\fR, \fB\-\-copy\fR
+copy files rather than symlinking them
+.TP
+\fB\-\-debug\fR
+enable verbose shell tracing
+.TP
+\fB\-n\fR, \fB\-\-dry\-run\fR
+print commands rather than running them
+.TP
+\fB\-f\fR, \fB\-\-force\fR
+replace existing files
+.TP
+\fB\-\-help\fR
+display this message and exit
+.TP
+\fB\-\-version\fR
+print version information and exit
+.PP
+You must `cd' to the top directory of your package before you run
+`lightningize'.
+.SH "SEE ALSO"
+The full documentation for
+.B lightningize
+is maintained as a Texinfo manual.  If the
+.B info
+and
+.B lightningize
+programs are properly installed at your site, the command
+.IP
+.B info lightning
+.PP
+should give you access to the complete manual.