[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Gsrc-commit] trunk r7781: bucnh of stuff
From: |
Carl Hansen |
Subject: |
[Gsrc-commit] trunk r7781: bucnh of stuff |
Date: |
Thu, 26 Aug 2021 01:38:00 -0400 (EDT) |
User-agent: |
Bazaar (2.7.0dev1) |
------------------------------------------------------------
revno: 7781
revision-id: carlhansen1234@gmail.com-20210826053748-txvqo8rzy547tkww
parent: carlhansen1234@gmail.com-20210826051211-mlha7g072i2chhq1
committer: carlhansen1234@gmail.com
branch nick: trunk
timestamp: Wed 2021-08-25 22:37:48 -0700
message:
bucnh of stuff
added:
pkg/gnu/taler-twister/ talertwister-20210826051759-mo6252oyksg14yff-1
pkg/gnu/taler-twister/Makefile makefile-20210826053705-xrdv2p2dckdpntmh-3
pkg/gnu/taler-twister/config.mk config.mk-20210826053705-xrdv2p2dckdpntmh-1
pkg/gnu/taler-twister/gpg-keyring gpgkeyring-20210826053705-xrdv2p2dckdpntmh-2
pkg/gnu/taler-twister/sha256sums sha256sums-20210826053705-xrdv2p2dckdpntmh-4
modified:
.bzrignore bzrignore-20100607095348-6sjyf7lw3wvxqxxf-1
doc/texinfo.tex texinfo.tex-20210501180820-1twq5wdsrp9yr9h7-1
pkg/gnome/glib/config.mk config.mk-20160617013948-zxz0vnfa6s7m6z8o-1
pkg/gnome/gnome-internet-radio-locator/Makefile
makefile-20170723073330-q873ctttc1fasd8u-3
pkg/gnome/gnome-mines/Makefile makefile-20160617013746-7ygosxqw3lxxvo7f-707
pkg/gnome/gnome-mines/sha256sums
sha256sums-20160617013746-7ygosxqw3lxxvo7f-711
pkg/gnu/binutils/config.mk config.mk-20160617014931-xoexy3m6dzmdi50i-1
pkg/gnu/diffutils/Makefile makefile-20160617014725-uokjfnggs70iry9h-579
pkg/gnu/diffutils/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-581
pkg/gnu/gcc11/Makefile makefile-20210428052007-s6hgkhmeykbbpts5-3
pkg/gnu/glibc/Makefile makefile-20160617014725-uokjfnggs70iry9h-1147
pkg/gnu/glibc/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-1152
pkg/gnu/gnunet-fuse/Makefile makefile-20160617014725-uokjfnggs70iry9h-846
pkg/gnu/gnunet-fuse/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-848
pkg/gnu/gnunet-gtk/Makefile makefile-20160617014725-uokjfnggs70iry9h-849
pkg/gnu/gnunet-gtk/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-851
pkg/gnu/gnunet/Makefile makefile-20160617014725-uokjfnggs70iry9h-843
pkg/gnu/gnunet/gpg-keyring gpgkeyring-20160617014725-uokjfnggs70iry9h-844
pkg/gnu/gnunet/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-845
pkg/gnu/gnupg/Makefile makefile-20160617014725-uokjfnggs70iry9h-852
pkg/gnu/gnupg/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-854
pkg/gnu/gpgme/Makefile makefile-20160617014725-uokjfnggs70iry9h-920
pkg/gnu/gpgme/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-925
pkg/gnu/grep/Makefile makefile-20160617014725-uokjfnggs70iry9h-934
pkg/gnu/grep/gpg-keyring gpgkeyring-20160617014725-uokjfnggs70iry9h-935
pkg/gnu/help2man/Makefile makefile-20160617014725-uokjfnggs70iry9h-1028
pkg/gnu/help2man/gpg-keyring gpgkeyring-20160617014725-uokjfnggs70iry9h-1029
pkg/gnu/help2man/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-1030
pkg/gnu/libgcrypt/Makefile makefile-20160617014725-uokjfnggs70iry9h-1173
pkg/gnu/libgcrypt/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-1178
pkg/gnu/mailutils/Makefile makefile-20160617014725-uokjfnggs70iry9h-1309
pkg/gnu/mailutils/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-1314
pkg/gnu/mcron/Makefile makefile-20160617014725-uokjfnggs70iry9h-1339
pkg/gnu/mcron/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-1345
pkg/gnu/mtools/Makefile makefile-20160617014725-uokjfnggs70iry9h-1434
pkg/gnu/mtools/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-1439
pkg/gnu/parallel/Makefile makefile-20160617014725-uokjfnggs70iry9h-1517
pkg/gnu/parallel/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-1523
pkg/gnu/pinentry/Makefile makefile-20160617014725-uokjfnggs70iry9h-1566
pkg/gnu/pinentry/sha256sums sha256sums-20160617014725-uokjfnggs70iry9h-1571
pkg/gnu/sync/Makefile makefile-20200213030304-yx2asiywqjos64vp-4
pkg/gnu/sync/gpg-keyring gpgkeyring-20200213030304-yx2asiywqjos64vp-3
pkg/gnu/sync/sha256sums sha256sums-20200213030304-yx2asiywqjos64vp-5
pkg/gnu/taler-exchange/Makefile makefile-20160617014725-uokjfnggs70iry9h-1837
pkg/gnu/taler-exchange/gpg-keyring
gpgkeyring-20160617014725-uokjfnggs70iry9h-1841
pkg/gnu/taler-exchange/sha256sums
sha256sums-20160617014725-uokjfnggs70iry9h-1842
pkg/gnu/taler-merchant/Makefile makefile-20160617014725-uokjfnggs70iry9h-1843
pkg/gnu/taler-merchant/gpg-keyring
gpgkeyring-20160617014725-uokjfnggs70iry9h-1847
pkg/gnu/taler-merchant/sha256sums
sha256sums-20160617014725-uokjfnggs70iry9h-1848
pkg/gnu/which/Makefile makefile-20160617014725-uokjfnggs70iry9h-2004
pkg/gnustep/pikopixel/Makefile makefile-20170709222704-0f4lemg2czrmq1rq-2
pkg/other/atlast/Makefile makefile-20191124215739-8czcgwtgvyqm0fb5-2
pkg/other/boost/Makefile makefile-20170608043614-zqx6plyn4p8cg7w0-3
pkg/other/boost/sha256sums sha256sums-20170608043614-zqx6plyn4p8cg7w0-4
pkg/other/cmake/Makefile makefile-20161012192420-6gwv2zkyfuom987t-2
pkg/other/cmake/config.mk config.mk-20161012192420-6gwv2zkyfuom987t-4
pkg/other/cmake/sha256sums sha256sums-20161012192420-6gwv2zkyfuom987t-3
pkg/other/gsequencer/Makefile makefile-20170404081001-mr4jrzxutgqe0il2-3
pkg/other/gsequencer/sha256sums sha256sums-20170404081001-mr4jrzxutgqe0il2-4
pkg/other/openssl/Makefile makefile-20170519063536-ogruph0tua5ch6ug-3
pkg/other/openssl/sha256sums sha256sums-20170519063536-ogruph0tua5ch6ug-4
setup.sh.in setup.sh-20101106152402-ooxzqd6t2mhrnaq2-1
=== modified file '.bzrignore'
--- a/.bzrignore 2016-06-17 19:08:15 +0000
+++ b/.bzrignore 2021-08-26 05:37:48 +0000
@@ -19,7 +19,6 @@
doc/Makefile.in
doc/mdate-sh
doc/stamp-vti
-doc/texinfo.tex
config.mk
config.status
config.log
=== modified file 'doc/texinfo.tex'
--- a/doc/texinfo.tex 2021-06-16 20:21:52 +0000
+++ b/doc/texinfo.tex 2021-08-26 05:37:48 +0000
@@ -1,5 +1,5 @@
% texinfo.tex -- TeX macros to handle Texinfo files.
-%
+%
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
@@ -218,7 +218,7 @@
% @errormsg{MSG}. Do the index-like expansions on MSG, but if things
% aren't perfect, it's not the end of the world, being an error message,
% after all.
-%
+%
\def\errormsg{\begingroup \indexnofonts \doerrormsg}
\def\doerrormsg#1{\errmessage{#1}}
@@ -323,9 +323,9 @@
% the output routine. The saved contents are valid until we actually
% \shipout a page.
%
-% (We used to run a short output routine to actually set \topmark and
-% \firstmark to the right values, but if this was called with an empty page
-% containing whatsits for writing index entries, the whatsits would be thrown
+% (We used to run a short output routine to actually set \topmark and
+% \firstmark to the right values, but if this was called with an empty page
+% containing whatsits for writing index entries, the whatsits would be thrown
% away and the index auxiliary file would remain empty.)
%
\newtoks\savedtopmark
@@ -449,7 +449,7 @@
}%
}
-% First remove any @comment, then any @c comment. Pass the result on to
+% First remove any @comment, then any @c comment. Pass the result on to
% \argcheckspaces.
\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
@@ -1093,8 +1093,8 @@
end
end
}
- % The -2 in the arguments here gives all the input to TeX catcode 12
- % (other) or 10 (space), preventing undefined control sequence errors. See
+ % The -2 in the arguments here gives all the input to TeX catcode 12
+ % (other) or 10 (space), preventing undefined control sequence errors. See
% https://lists.gnu.org/archive/html/bug-texinfo/2019-08/msg00031.html
%
\endgroup
@@ -1188,7 +1188,7 @@
% for display in the outlines, and in other places. Thus, we have to
% double any backslashes. Otherwise, a name like "\node" will be
% interpreted as a newline (\n), followed by o, d, e. Not good.
-%
+%
% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
% related messages. The final outcome is that it is up to the TeX user
% to double the backslashes and otherwise make the string valid, so
@@ -1476,7 +1476,7 @@
% We use the node names as the destinations.
%
% Currently we prefix the section name with the section number
- % for chapter and appendix headings only in order to avoid too much
+ % for chapter and appendix headings only in order to avoid too much
% horizontal space being required in the PDF viewer.
\def\numchapentry##1##2##3##4{%
\dopdfoutline{##2 ##1}{count-\expnumber{chap##2}}{##3}{##4}}%
@@ -1499,7 +1499,7 @@
% their "best" equivalent, based on the @documentencoding. Too
% much work for too little return. Just use the ASCII equivalents
% we use for the index sort strings.
- %
+ %
\indexnofonts
\setupdatafile
% We can have normal brace characters in the PDF outlines, unlike
@@ -1724,7 +1724,7 @@
% We use node names as destinations.
%
% Currently we prefix the section name with the section number
- % for chapter and appendix headings only in order to avoid too much
+ % for chapter and appendix headings only in order to avoid too much
% horizontal space being required in the PDF viewer.
\def\partentry##1##2##3##4{}% ignore parts in the outlines
\def\numchapentry##1##2##3##4{%
@@ -2736,7 +2736,7 @@
}
% Commands to set the quote options.
-%
+%
\parseargdef\codequoteundirected{%
\def\temp{#1}%
\ifx\temp\onword
@@ -2777,7 +2777,7 @@
% If we are in a monospaced environment, however, 1) always use \ttsl,
% and 2) do not add an italic correction.
\def\dosmartslant#1#2{%
- \ifusingtt
+ \ifusingtt
{{\ttsl #2}\let\next=\relax}%
{\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}%
\next
@@ -2923,14 +2923,14 @@
\gdef\codedash{\futurelet\next\codedashfinish}
\gdef\codedashfinish{%
\normaldash % always output the dash character itself.
- %
+ %
% Now, output a discretionary to allow a line break, unless
% (a) the next character is a -, or
% (b) the preceding character is a -.
% E.g., given --posix, we do not want to allow a break after either -.
% Given --foo-bar, we do want to allow a break between the - and the b.
\ifx\next\codedash \else
- \ifx\codedashprev\codedash
+ \ifx\codedashprev\codedash
\else \discretionary{}{}{}\fi
\fi
% we need the space after the = for the case when \next itself is a
@@ -3020,7 +3020,7 @@
% For pdfTeX and LuaTeX
\ifurefurlonlylink
% PDF plus option to not display url, show just arg
- \unhbox0
+ \unhbox0
\else
% PDF, normally display both arg and url for consistency,
% visibility, if the pdf is eventually used to print, etc.
@@ -3033,7 +3033,7 @@
% For XeTeX
\ifurefurlonlylink
% PDF plus option to not display url, show just arg
- \unhbox0
+ \unhbox0
\else
% PDF, normally display both arg and url for consistency,
% visibility, if the pdf is eventually used to print, etc.
@@ -3091,10 +3091,10 @@
}
}
-% By default we'll break after the special characters, but some people like to
-% break before the special chars, so allow that. Also allow no breaking at
+% By default we'll break after the special characters, but some people like to
+% break before the special chars, so allow that. Also allow no breaking at
% all, for manual control.
-%
+%
\parseargdef\urefbreakstyle{%
\def\txiarg{#1}%
\ifx\txiarg\wordnone
@@ -3113,10 +3113,10 @@
\def\wordnone{none}
% Allow a ragged right output to aid breaking long URL's. There can
-% be a break at the \allowbreak with no extra glue (if the existing stretch in
+% be a break at the \allowbreak with no extra glue (if the existing stretch in
% the line is sufficient), a break at the \penalty with extra glue added
% at the end of the line, or no break at all here.
-% Changing the value of the penalty and/or the amount of stretch affects how
+% Changing the value of the penalty and/or the amount of stretch affects how
% preferable one choice is over the other.
\def\urefallowbreak{%
\penalty0\relax
@@ -3344,7 +3344,7 @@
% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
% except specified as a normal braced arg, so no newlines to worry about.
-%
+%
\def\outfmtnametex{tex}
%
\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
@@ -3352,7 +3352,7 @@
\def\inlinefmtname{#1}%
\ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
}
-%
+%
% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if
% FMTNAME is tex, else ELSE-TEXT.
\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish}
@@ -3368,7 +3368,7 @@
% *right* brace they would have to use a command anyway, so they may as
% well use a command to get a left brace too. We could re-use the
% delimiter character idea from \verb, but it seems like overkill.
-%
+%
\long\def\inlineraw{\tex \doinlineraw}
\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
\def\doinlinerawtwo#1,#2,\finish{%
@@ -3645,7 +3645,7 @@
% for non-CM glyphs. That is ec* for regular text and tc* for the text
% companion symbols (LaTeX TS1 encoding). Both are part of the ec
% package and follow the same conventions.
-%
+%
\def\ecfont{\etcfont{e}}
\def\tcfont{\etcfont{t}}
%
@@ -3725,7 +3725,7 @@
after the title page.}}%
\def\setshortcontentsaftertitlepage{%
\errmessage{@setshortcontentsaftertitlepage has been removed as a Texinfo
- command; move your @shortcontents and @contents commands if you
+ command; move your @shortcontents and @contents commands if you
want the contents after the title page.}}%
\parseargdef\shorttitlepage{%
@@ -3780,7 +3780,7 @@
% don't worry much about spacing, ragged right. This should be used
% inside a \vbox, and fonts need to be set appropriately first. \par should
% be specified before the end of the \vbox, since a vbox is a group.
-%
+%
\def\raggedtitlesettings{%
\rm
\hyphenpenalty=10000
@@ -4613,7 +4613,7 @@
% Like \expandablevalue, but completely expandable (the \message in the
% definition above operates at the execution level of TeX). Used when
% writing to auxiliary files, due to the expansion that \write does.
-% If flag is undefined, pass through an unexpanded @value command: maybe it
+% If flag is undefined, pass through an unexpanded @value command: maybe it
% will be set by the time it is read back in.
%
% NB flag names containing - or _ may not work here.
@@ -4637,7 +4637,7 @@
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
-%
+%
% To get the special treatment we need for `@end ifset,' we call
% \makecond and then redefine.
%
@@ -4670,7 +4670,7 @@
% without the @) is in fact defined. We can only feasibly check at the
% TeX level, so something like `mathcode' is going to considered
% defined even though it is not a Texinfo command.
-%
+%
\makecond{ifcommanddefined}
\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
%
@@ -4778,8 +4778,8 @@
\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
\def\docodeindexxxx #1{\docind{\indexname}{#1}}
-
-% Used for the aux, toc and index files to prevent expansion of Texinfo
+
+% Used for the aux, toc and index files to prevent expansion of Texinfo
% commands.
%
\def\atdummies{%
@@ -5126,11 +5126,11 @@
\let\value\indexnofontsvalue
}
-% Give the control sequence a definition that removes the {} that follows
+% Give the control sequence a definition that removes the {} that follows
% its use, e.g. @AA{} -> AA
\def\indexnofontsdef#1#2{\def#1##1{#2}}%
-
+
% #1 is the index name, #2 is the entry text.
@@ -5171,7 +5171,7 @@
\ifx\suffix\indexisfl\def\suffix{f1}\fi
% Open the file
\immediate\openout\csname#1indfile\endcsname \jobname.\suffix
- % Using \immediate above here prevents an object entering into the current
+ % Using \immediate above here prevents an object entering into the current
% box, which could confound checks such as those in \safewhatsit for
% preceding skips.
\typeout{Writing index file \jobname.\suffix}%
@@ -5223,7 +5223,7 @@
\ifx\segment\isfinish
\else
%
- % Fully expand the segment, throwing away any @sortas directives, and
+ % Fully expand the segment, throwing away any @sortas directives, and
% trim spaces.
\edef\trimmed{\segment}%
\edef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}%
@@ -5284,12 +5284,12 @@
% the current value of \escapechar.
\def\escapeisbackslash{\escapechar=`\\}
-% Use \ in index files by default. texi2dvi didn't support @ as the escape
-% character (as it checked for "\entry" in the files, and not "@entry"). When
-% the new version of texi2dvi has had a chance to become more prevalent, then
-% the escape character can change back to @ again. This should be an easy
-% change to make now because both @ and \ are only used as escape characters
in
-% index files, never standing for themselves.
+% Use \ in index files by default. texi2dvi didn't support @ as the escape
+% character (as it checked for "\entry" in the files, and not "@entry"). When
+% the new version of texi2dvi has had a chance to become more prevalent, then
+% the escape character can change back to @ again. This should be an easy
+% change to make now because both @ and \ are only used as escape characters in
+% index files, never standing for themselves.
%
\set txiindexescapeisbackslash
@@ -5314,7 +5314,7 @@
\def\}{\rbracechar{}}%
\uccode`\~=`\\ \uppercase{\def~{\backslashchar{}}}%
%
- % Split the entry into primary entry and any subentries, and get the index
+ % Split the entry into primary entry and any subentries, and get the index
% sort key.
\splitindexentry\indextext
%
@@ -5495,18 +5495,18 @@
\uccode`\~=`\\ \uppercase{\if\noexpand~}\noexpand#1
\expandafter\ifx\csname SETtxiskipindexfileswithbackslash\endcsname\relax
\errmessage{%
-ERROR: A sorted index file in an obsolete format was skipped.
+ERROR: A sorted index file in an obsolete format was skipped.
To fix this problem, please upgrade your version of 'texi2dvi'
or 'texi2pdf' to that at <https://ftp.gnu.org/gnu/texinfo>.
-If you are using an old version of 'texindex' (part of the Texinfo
+If you are using an old version of 'texindex' (part of the Texinfo
distribution), you may also need to upgrade to a newer version (at least 6.0).
You may be able to typeset the index if you run
'texindex \jobname.\indexname' yourself.
-You could also try setting the 'txiindexescapeisbackslash' flag by
+You could also try setting the 'txiindexescapeisbackslash' flag by
running a command like
-'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do
+'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do
this, Texinfo will try to use index files in the old format.
-If you continue to have problems, deleting the index files and starting again
+If you continue to have problems, deleting the index files and starting again
might help (with 'rm \jobname.?? \jobname.??s')%
}%
\else
@@ -5579,7 +5579,7 @@
% bottom of a column to reduce an increase in inter-line spacing.
\nobreak
\vskip 0pt plus 5\baselineskip
- \penalty -300
+ \penalty -300
\vskip 0pt plus -5\baselineskip
%
% Typeset the initial. Making this add up to a whole number of
@@ -5695,7 +5695,7 @@
\advance\dimen@ii by 1\dimen@i
\ifdim\wd\boxA > \dimen@ii % If the entry doesn't fit in one line
\ifdim\dimen@ > 0.8\dimen@ii % due to long index text
- % Try to split the text roughly evenly. \dimen@ will be the length of
+ % Try to split the text roughly evenly. \dimen@ will be the length of
% the first line.
\dimen@ = 0.7\dimen@
\dimen@ii = \hsize
@@ -5903,7 +5903,7 @@
\newbox\balancedcolumns
\setbox\balancedcolumns=\vbox{shouldnt see this}%
%
-% Only called for the last of the double column material. \doublecolumnout
+% Only called for the last of the double column material. \doublecolumnout
% does the others.
\def\balancecolumns{%
\setbox0 = \vbox{\unvbox\PAGE}% like \box255 but more efficient, see p.120.
@@ -5931,7 +5931,7 @@
}%
% Now the left column is in box 1, and the right column in box 3.
%
- % Check whether the left column has come out higher than the page itself.
+ % Check whether the left column has come out higher than the page itself.
% (Note that we have doubled \vsize for the double columns, so
% the actual height of the page is 0.5\vsize).
\ifdim2\ht1>\vsize
@@ -6228,7 +6228,7 @@
\let\top\unnumbered
% Sections.
-%
+%
\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
\def\seczzz#1{%
\global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
@@ -6251,7 +6251,7 @@
}
% Subsections.
-%
+%
% normally calls numberedsubseczzz:
\outer\parseargdef\numberedsubsec{\numhead2{#1}}
\def\numberedsubseczzz#1{%
@@ -6276,7 +6276,7 @@
}
% Subsubsections.
-%
+%
% normally numberedsubsubseczzz:
\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
\def\numberedsubsubseczzz#1{%
@@ -7342,7 +7342,7 @@
% @indentedblock is like @quotation, but indents only on the left and
% has no optional argument.
-%
+%
\makedispenvdef{indentedblock}{\indentedblockstart}
%
\def\indentedblockstart{%
@@ -7639,7 +7639,7 @@
% @deftypefnnewline on|off says whether the return type of typed functions
% are printed on their own line. This affects @deftypefn, @deftypefun,
% @deftypeop, and @deftypemethod.
-%
+%
\parseargdef\deftypefnnewline{%
\def\temp{#1}%
\ifx\temp\onword
@@ -7658,8 +7658,8 @@
% \dosubind {index}{topic}{subtopic}
%
% If SUBTOPIC is present, precede it with a space, and call \doind.
-% (At some time during the 20th century, this made a two-level entry in an
-% index such as the operation index. Nobody seemed to notice the change in
+% (At some time during the 20th century, this made a two-level entry in an
+% index such as the operation index. Nobody seemed to notice the change in
% behaviour though.)
\def\dosubind#1#2#3{%
\def\thirdarg{#3}%
@@ -7834,7 +7834,7 @@
\tclose{\temp}% typeset the return type
\ifrettypeownline
% put return type on its own line; prohibit line break following:
- \hfil\vadjust{\nobreak}\break
+ \hfil\vadjust{\nobreak}\break
\else
\space % type on same line, so just followed by a space
\fi
@@ -7988,7 +7988,7 @@
\scantokens{#1@comment}%
%
% The \comment is to remove the \newlinechar added by \scantokens, and
- % can be noticed by \parsearg. Note \c isn't used because this means
cedilla
+ % can be noticed by \parsearg. Note \c isn't used because this means cedilla
% in math mode.
}
@@ -8194,7 +8194,7 @@
% list to some hook where the argument is to be expanded. If there are
% less than 10 arguments that hook is to be replaced by ##N where N
% is the position in that list, that is to say the macro arguments are to be
-% defined `a la TeX in the macro body.
+% defined `a la TeX in the macro body.
%
% That gets used by \mbodybackslash (above).
%
@@ -8228,8 +8228,8 @@
%
% Read recursive and nonrecursive macro bodies. (They're different since
% rec and nonrec macros end differently.)
-%
-% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro
+%
+% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro
% body to be transformed.
% Set \macrobody to the body of the macro, and call \defmacro.
%
@@ -8263,7 +8263,7 @@
% twice the \macarg.BLAH macros does not cost too much processing power.
\def\parsemmanyargdef@@#1,{%
\if#1;\let\next=\relax
- \else
+ \else
\let\next=\parsemmanyargdef@@
\edef\tempb{\eatspaces{#1}}%
\expandafter\def\expandafter\tempa
@@ -8348,7 +8348,7 @@
% Replace arguments by their values in the macro body, and place the result
% in macro \@tempa.
-%
+%
\def\macvalstoargs@{%
% To do this we use the property that token registers that are \the'ed
% within an \edef expand only once. So we are going to place all argument
@@ -8372,9 +8372,9 @@
\expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
}
-% Define the named-macro outside of this group and then close this group.
-%
-\def\macargexpandinbody@{%
+% Define the named-macro outside of this group and then close this group.
+%
+\def\macargexpandinbody@{%
\expandafter
\endgroup
\macargdeflist@
@@ -8412,7 +8412,7 @@
}
% Trailing missing arguments are set to empty.
-%
+%
\def\setemptyargvalues@{%
\ifx\paramlist\nilm@
\let\next\macargexpandinbody@
@@ -8489,7 +8489,7 @@
\else % at most 9
\ifnum\paramno<10\relax
% @MACNAME sets the context for reading the macro argument
- % @MACNAME@@ gets the argument, processes backslashes and appends a
+ % @MACNAME@@ gets the argument, processes backslashes and appends a
% comma.
% @MACNAME@@@ removes braces surrounding the argument list.
% @MACNAME@@@@ scans the macro body with arguments substituted.
@@ -8533,11 +8533,11 @@
% Call #1 with a list of tokens #2, with any doubled backslashes in #2
% compressed to one.
%
-% This implementation works by expansion, and not execution (so we cannot use
-% \def or similar). This reduces the risk of this failing in contexts where
-% complete expansion is done with no execution (for example, in writing out to
+% This implementation works by expansion, and not execution (so we cannot use
+% \def or similar). This reduces the risk of this failing in contexts where
+% complete expansion is done with no execution (for example, in writing out to
% an auxiliary file for an index entry).
-%
+%
% State is kept in the input stream: the argument passed to
% @look_ahead, @gobble_and_check_finish and @add_segment is
%
@@ -8559,11 +8559,11 @@
% #3 - NEXT_TOKEN
% #4 used to look ahead
%
-% If the next token is not a backslash, process the rest of the argument;
+% If the next token is not a backslash, process the rest of the argument;
% otherwise, remove the next token.
@gdef@look_ahead#1!#2#3#4{%
@ifx#4\%
- @expandafter@gobble_and_check_finish
+ @expandafter@gobble_and_check_finish
@else
@expandafter@add_segment
@fi#1!{#2}#4#4%
@@ -8587,9 +8587,9 @@
% #3 - NEXT_TOKEN
% #4 is input stream until next backslash
%
-% Input stream is either at the start of the argument, or just after a
-% backslash sequence, either a lone backslash, or a doubled backslash.
-% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
+% Input stream is either at the start of the argument, or just after a
+% backslash sequence, either a lone backslash, or a doubled backslash.
+% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
% finish; otherwise, append to ARG_RESULT the segment of the argument up until
% the next backslash. PENDING_BACKSLASH contains a backslash to represent
% a backslash just before the start of the input stream that has not been
@@ -8601,13 +8601,13 @@
% append the pending backslash to the result, followed by the next segment
@expandafter@is_fi@look_ahead#1#2#4!{\}@fi
% this @fi is discarded by @look_ahead.
- % we can't get rid of it with \expandafter because we don't know how
+ % we can't get rid of it with \expandafter because we don't know how
% long #4 is.
}
% #1 - THE_MACRO
% #2 - ARG_RESULT
-% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
+% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
% conditional.
@gdef@call_the_macro#1#2!#3@fi{@is_fi #1{#2}}
@@ -8619,7 +8619,7 @@
% for reading the argument (slightly different in the two cases). Then,
% to read the argument, in the whole-line case, it then calls the regular
% \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC.
-%
+%
\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
\def\braceorlinexxx{%
\ifx\nchar\bgroup
@@ -8673,7 +8673,7 @@
% Used so that the @top node doesn't have to be wrapped in an @ifnottex
% conditional.
-% \doignore goes to more effort to skip nested conditionals but we don't need
+% \doignore goes to more effort to skip nested conditionals but we don't need
% that here.
\def\omittopnode{%
\ifx\lastnode\wordTop
@@ -8681,7 +8681,7 @@
}
\def\wordTop{Top}
-% Until the next @node or @bye command, divert output to a box that is not
+% Until the next @node or @bye command, divert output to a box that is not
% output.
\def\ignorenode{\setbox\dummybox\vbox\bgroup\def\node{\egroup\node}%
\ignorenodebye
@@ -8748,7 +8748,7 @@
% automatically in xrefs, if the third arg is not explicitly specified.
% This was provided as a "secret" @set xref-automatic-section-title
% variable, now it's official.
-%
+%
\parseargdef\xrefautomaticsectiontitle{%
\def\temp{#1}%
\ifx\temp\onword
@@ -8764,7 +8764,7 @@
\fi\fi
}
-%
+%
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
% the node name, #2 the name of the Info cross-reference, #3 the printed
% node name, #4 the name of the Info file, #5 the name of the printed
@@ -8917,24 +8917,24 @@
\fi
\else
% node/anchor (non-float) references.
- %
+ %
% If we use \unhbox to print the node names, TeX does not insert
% empty discretionaries after hyphens, which means that it will not
% find a line break at a hyphen in a node names. Since some manuals
% are best written with fairly long node names, containing hyphens,
% this is a loss. Therefore, we give the text of the node name
% again, so it is as if TeX is seeing it for the first time.
- %
+ %
\ifdim \wd\printedmanualbox > 0pt
% Cross-manual reference with a printed manual name.
- %
+ %
\crossmanualxref{\cite{\printedmanual\unskip}}%
%
\else\ifdim \wd\infofilenamebox > 0pt
% Cross-manual reference with only an info filename (arg 4), no
% printed manual name (arg 5). This is essentially the same as
% the case above; we output the filename, since we have nothing else.
- %
+ %
\crossmanualxref{\code{\infofilename\unskip}}%
%
\else
@@ -8970,20 +8970,20 @@
\endgroup}
% Output a cross-manual xref to #1. Used just above (twice).
-%
+%
% Only include the text "Section ``foo'' in" if the foo is neither
% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply
% "see The Foo Manual", the idea being to refer to the whole manual.
-%
+%
% But, this being TeX, we can't easily compare our node name against the
% string "Top" while ignoring the possible spaces before and after in
% the input. By adding the arbitrary 7sp below, we make it much less
% likely that a real node name would have the same width as "Top" (e.g.,
% in a monospaced font). Hopefully it will never happen in practice.
-%
+%
% For the same basic reason, we retypeset the "Top" at every
% reference, since the current font is indeterminate.
-%
+%
\def\crossmanualxref#1{%
\setbox\toprefbox = \hbox{Top\kern7sp}%
\setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
@@ -9060,9 +9060,9 @@
\fi
}
-% This is the macro invoked by entries in the aux file. Define a control
-% sequence for a cross-reference target (we prepend XR to the control sequence
-% name to avoid collisions). The value is the page number. If this is a
float
+% This is the macro invoked by entries in the aux file. Define a control
+% sequence for a cross-reference target (we prepend XR to the control sequence
+% name to avoid collisions). The value is the page number. If this is a float
% type, we have more work to do.
%
\def\xrdef#1#2{%
@@ -9078,10 +9078,10 @@
\bgroup
\expandafter\gdef\csname XR\safexrefname\endcsname{#2}%
\egroup
- % We put the \gdef inside a group to avoid the definitions building up on
- % TeX's save stack, which can cause it to run out of space for aux files
with
+ % We put the \gdef inside a group to avoid the definitions building up on
+ % TeX's save stack, which can cause it to run out of space for aux files with
% thousands of lines. \gdef doesn't use the save stack, but \csname does
- % when it defines an unknown control sequence as \relax.
+ % when it defines an unknown control sequence as \relax.
%
% Was that xref control sequence that we just defined for a float?
\expandafter\iffloat\csname XR\safexrefname\endcsname
@@ -9440,7 +9440,7 @@
%
\ifimagevmode
\medskip % space after a standalone image
- \fi
+ \fi
\ifx\centersub\centerV \egroup \fi
\endgroup}
@@ -10271,7 +10271,7 @@
\uppercase{.}
\endgroup
\else
- \errhelp = \EMsimple
+ \errhelp = \EMsimple
\errmessage{Unicode character U+#1 not supported, sorry}%
\fi
\else
@@ -10304,7 +10304,7 @@
\countUTFz = "#1\relax
\begingroup
\parseXMLCharref
-
+
% Give \u8:... its definition. The sequence of seven \expandafter's
% expands after the \gdef three times, e.g.
%
@@ -10316,7 +10316,7 @@
\expandafter\expandafter
\expandafter\expandafter
\expandafter\gdef \UTFviiiTmp{#2}%
- %
+ %
\expandafter\ifx\csname uni:#1\endcsname \relax \else
\message{Internal error, already defined: #1}%
\fi
@@ -10355,7 +10355,7 @@
\divide\countUTFz by 64
\countUTFy = \countUTFz % Save to be the future value of \countUTFz.
\multiply\countUTFz by 64
-
+
% \countUTFz is now \countUTFx with the last 5 bits cleared. Subtract
% in order to get the last five bits.
\advance\countUTFx by -\countUTFz
@@ -10390,7 +10390,7 @@
% U+0080..U+00FF =
https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block)
% U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A
% U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B
-%
+%
% Many of our renditions are less than wonderful, and all the missing
% characters are available somewhere. Loading the necessary fonts
% awaits user request. We can't truly support Unicode without
@@ -11442,7 +11442,7 @@
\def\texinfochars{%
\let< = \activeless
\let> = \activegtr
- \let~ = \activetilde
+ \let~ = \activetilde
\let^ = \activehat
\setregularquotes
\let\b = \strong
=== modified file 'pkg/gnome/glib/config.mk'
--- a/pkg/gnome/glib/config.mk 2020-09-12 01:31:41 +0000
+++ b/pkg/gnome/glib/config.mk 2021-08-26 05:37:48 +0000
@@ -2,12 +2,12 @@
#CONFIGURE_OPTS ?=
# might be needed:
-#CONFIGURE_OPTS ?= --with-libiconv CFLAGS="-DUSE_LIBICONV_GNU=1" -Diconv=gnu
-CONFIGURE_OPTS ?=
+CONFIGURE_OPTS ?= --with-libiconv CFLAGS="-DUSE_LIBICONV_GNU=1" -Diconv=gnu
+#CONFIGURE_OPTS ?=
#BUILD_OPTS ?=
# might be needed:
#BUILD_OPTS ?= -Wl,-I/opt/gsrc/include -Wl,-L/opt/gsrc/lib -Wl,-rpath
-Wl,/opt/gsrc/lib CFLAGS="-DUSE_LIBICONV_GNU=1" LDFLAGS+=-liconv -Dicon=gnu
-BUILD_OPTS ?= -Wl,-I/opt/gsrc/include -Wl,-L/opt/gsrc/lib
-#-Wl,-liconv CFLAGS="-DUSE_LIBICONV_GNU=1" LDFLAGS+=-liconv
+#BUILD_OPTS ?= -Wl,-I/opt/gsrc/include -Wl,-L/opt/gsrc/lib
+BUILD_OPTS ?= -Wl,-liconv CFLAGS="-DUSE_LIBICONV_GNU=1" LDFLAGS+=-liconv
=== modified file 'pkg/gnome/gnome-internet-radio-locator/Makefile'
--- a/pkg/gnome/gnome-internet-radio-locator/Makefile 2021-07-25 01:09:54
+0000
+++ b/pkg/gnome/gnome-internet-radio-locator/Makefile 2021-08-26 05:37:48
+0000
@@ -1,4 +1,4 @@
-# Copyright ©2017,2018,2019,2020 Carl Hansen <carlhansen@gnu.org>
+# Copyright ©2017,2018,2019,2020,2021 Carl Hansen <carlhansen@gnu.org>
#
# This file is part of GSRC, the GNU Source Release Collection.
# http://www.gnu.org/software/gsrc
=== modified file 'pkg/gnome/gnome-mines/Makefile'
--- a/pkg/gnome/gnome-mines/Makefile 2021-06-03 18:28:44 +0000
+++ b/pkg/gnome/gnome-mines/Makefile 2021-08-26 05:37:48 +0000
@@ -33,6 +33,7 @@
space:= $(empty) $(empty)
VERSION_LIST = $(subst .,$(space),$(GARVERSION))
SERIES = $(subst $(space),.,$(wordlist 1,2,$(VERSION_LIST)))
+SERIES = 40
MASTER_SITES = $(MASTER_GNOME)
MASTER_SUBDIR = $(GARNAME)/$(SERIES)/
=== modified file 'pkg/gnome/gnome-mines/sha256sums'
--- a/pkg/gnome/gnome-mines/sha256sums 2020-08-19 04:46:16 +0000
+++ b/pkg/gnome/gnome-mines/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-7188130d6faee1b87ca92295da196ad27139801ca793ea6b0c665a9232404654
download/gnome-mines-3.36.1.tar.xz
-ed39a0d284f8fabb09503ba98cb38b9315a81fffc19cde5d865d69723efadbfe
download/gnome-mines-3.36.1.sha256sum
+1f79ba6c2ae4a56e5a0c23668d40f05cfcac68a2d848db1a1cf9920c779bc669
download/gnome-mines-40.0.tar.xz
+f49e7f54a6ef108efe2ca1e4827ea88dc2cb84009ff29a73c7ebe80630329fe8
download/gnome-mines-40.0.sha256sum
=== modified file 'pkg/gnu/binutils/config.mk'
--- a/pkg/gnu/binutils/config.mk 2017-10-30 09:42:35 +0000
+++ b/pkg/gnu/binutils/config.mk 2021-08-26 05:37:48 +0000
@@ -1,5 +1,4 @@
## Configuration options for binutils ##
-CONFIGURE_OPTS ?= --with-sysroot=$(prefix)
+CONFIGURE_OPTS ?= --with-sysroot=$(prefix) --enable-gold
BUILD_OPTS ?=
-#-I.
=== modified file 'pkg/gnu/diffutils/Makefile'
--- a/pkg/gnu/diffutils/Makefile 2019-01-04 17:28:47 +0000
+++ b/pkg/gnu/diffutils/Makefile 2021-08-26 05:37:48 +0000
@@ -1,7 +1,8 @@
# Copyright © 2013, 2014, 2017 Brandon Invergo <brandon@invergo.net>
-# Copyright © 2018 Carl Hansen <carlhansen@gnu.org>
+# Copyright © 2018, 2021 Carl Hansen <carlhansen@gnu.org>
#
-# This file is part of GSRC.
+# This file is part of GSRC, the GNU Source Release Collection.
+# http://www.gnu.org/software/gsrc
#
# GSRC is free software: you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -15,12 +16,15 @@
#
# You should have received a copy of the GNU General Public License
# along with GSRC. If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# Send bug reports and comments about GSRC problems to bug-gsrc@gnu.org
NAME = Diffutils
GARNAME = diffutils
-GARVERSION = 3.7
+GARVERSION = 3.8
HOME_URL = http://www.gnu.org/software/diffutils/diffutils.html/
-DESCRIPTION = Comparing and merging files
+DESCRIPTION = Comparing and merging files, diff, cmp
define BLURB
GNU Diffutils is a package containing tools for finding the
differences between files. The "diff" command is used to show how two
=== modified file 'pkg/gnu/diffutils/sha256sums'
--- a/pkg/gnu/diffutils/sha256sums 2019-01-01 03:08:48 +0000
+++ b/pkg/gnu/diffutils/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-b3a7a6221c3dc916085f0d205abf6b8e1ba443d4dd965118da364a1dc1cb3a26
download/diffutils-3.7.tar.xz
-c89b9d60a1d67cf8b2dd108a8b918e4cce34cba6c9e1f67e2ca482c52c0258a7
download/diffutils-3.7.tar.xz.sig
+a6bdd7d1b31266d11c4f4de6c1b748d4607ab0231af5188fc2533d0ae2438fec
download/diffutils-3.8.tar.xz
+500f423d0ffa8d28966d916ed5fc6b79fb160a20ed5cb74eeb1c94a30c340311
download/diffutils-3.8.tar.xz.sig
=== modified file 'pkg/gnu/gcc11/Makefile'
--- a/pkg/gnu/gcc11/Makefile 2021-07-29 16:39:28 +0000
+++ b/pkg/gnu/gcc11/Makefile 2021-08-26 05:37:48 +0000
@@ -106,7 +106,7 @@
# note: at end --target=x86_64-linux-gnu
# Many options at just what Debian ships with;
# adjust as necessary.
-#
+# ada
CONFIGURE_ARGS = --prefix=$(prefix) \
--program-suffix=-11 \
@@ -122,7 +122,7 @@
--enable-gnu-unique-object \
--enable-gtk-cairo \
--enable-host-shared \
---enable-languages=c,c++,fortran,go,brig,ada,d,jit,objc,obj-c++ \
+--enable-languages=c,c++,fortran,go,brig,d,jit,objc,obj-c++,ada \
--enable-libmpx \
--enable-libssp \
--enable-libstdcxx-debug \
@@ -149,8 +149,13 @@
--disable-vtable-verify \
--enable-libada \
--disable-werror \
---enable-stage1-checking
-
+--build=x86_64-linux-gnu \
+--host=x86_64-linux-gnu \
+--target=x86_64-linux-gnu
+
+
+
+#--enable-stage1-checking
#--enable-bootstrap \
@@ -165,9 +170,9 @@
#
# adjust if needed. ad hoc
# due to compile problems with gccgo
-BUILD_ARGS = CFLAGS+="--save-temps -Wall -Wextra -fno-split-stack" \
+BUILD_ARGS = CFLAGS+="--save-temps -Wall -Wextra -fno-split-stack
-fpermissive" \
CXXFLAGS+="--save-temps -Wall -Wextra -fno-split-stack" \
- CPPFLAGS="-I. -I.. "
+ CPPFLAGS="-I. -I.. "
# still doesn't fix it
#BUILD_ARGS = CFLAGS+="--save-temps -Wall -Wextra " \
# CXXFLAGS+="--save-temps -Wall -Wextra " \
=== modified file 'pkg/gnu/glibc/Makefile'
--- a/pkg/gnu/glibc/Makefile 2021-04-20 05:27:41 +0000
+++ b/pkg/gnu/glibc/Makefile 2021-08-26 05:37:48 +0000
@@ -24,7 +24,7 @@
NAME = The GNU C Library glibc
GARNAME = glibc
# also called libc
-GARVERSION = 2.33
+GARVERSION = 2.34
HOME_URL = http://www.gnu.org/software/libc/
DESCRIPTION = GNU standard C library
define BLURB
@@ -51,7 +51,6 @@
INSTALL_SCRIPTS = $(WORKOBJ)/Makefile-DESTDIR
BUILDDEPS =
-#binutils
LIBDEPS =
######################################################################
=== modified file 'pkg/gnu/glibc/sha256sums'
--- a/pkg/gnu/glibc/sha256sums 2021-02-02 22:57:24 +0000
+++ b/pkg/gnu/glibc/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-2e2556000e105dbd57f0b6b2a32ff2cf173bde4f0d85dffccfd8b7e51a0677ff
download/glibc-2.33.tar.xz
-572651aa0ae2e4dad523c62e78762a067063130d2555bf846203015282505109
download/glibc-2.33.tar.xz.sig
+44d26a1fe20b8853a48f470ead01e4279e869ac149b195dda4e44a195d981ab2
download/glibc-2.34.tar.xz
+29884ed0fea00303c467675351a5ea68a9d9aabb7ce524e8656e6c8e5063ec63
download/glibc-2.34.tar.xz.sig
=== modified file 'pkg/gnu/gnunet-fuse/Makefile'
--- a/pkg/gnu/gnunet-fuse/Makefile 2020-11-14 21:04:48 +0000
+++ b/pkg/gnu/gnunet-fuse/Makefile 2021-08-26 05:37:48 +0000
@@ -23,7 +23,7 @@
NAME = GNUnet-fuse
GARNAME = gnunet-fuse
-GARVERSION = 0.14.0
+GARVERSION = 0.15.0
HOME_URL = http://www.gnu.org/software/gnunet/
DESCRIPTION = A FUSE filesystem client for GNUnet
define BLURB
=== modified file 'pkg/gnu/gnunet-fuse/sha256sums'
--- a/pkg/gnu/gnunet-fuse/sha256sums 2020-11-14 21:04:48 +0000
+++ b/pkg/gnu/gnunet-fuse/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-4e7d470e2a119e13e4fa8ca9d2b7db58a90bf415dde099499f9e189b4319d774
download/gnunet-fuse-0.14.0.tar.gz
-557517dce731b55f21ba30278dba112e09e52bc49e392bd410d2cabf549e4784
download/gnunet-fuse-0.14.0.tar.gz.sig
+ccb99534408ad6a31ebb833719dd3f99a546cd8f538ee1d222a9653cee94e1da
download/gnunet-fuse-0.15.0.tar.gz
+40a827b1e332468ad21116607799a0e7fc781612aaaac4024f455584c02249e6
download/gnunet-fuse-0.15.0.tar.gz.sig
=== modified file 'pkg/gnu/gnunet-gtk/Makefile'
--- a/pkg/gnu/gnunet-gtk/Makefile 2020-11-14 21:04:48 +0000
+++ b/pkg/gnu/gnunet-gtk/Makefile 2021-08-26 05:37:48 +0000
@@ -1,5 +1,5 @@
# Copyright © 2013, 2014 Brandon Invergo <brandon@invergo.net>
-# Copyright © 2019, 2020 Carl Hansen <carlhansen@gnu.org>
+# Copyright © 2019, 2020, 2021 Carl Hansen <carlhansen@gnu.org>
#
# This file is part of GSRC, the GNU Source Release Collection.
# http://www.gnu.org/software/gsrc
@@ -22,7 +22,7 @@
NAME = GNUnet-gtk
GARNAME = gnunet-gtk
-GARVERSION = 0.14.0
+GARVERSION = 0.15.0
HOME_URL = http://www.gnu.org/software/gnunet/
DESCRIPTION = GNUnet GTK+ interface
define BLURB
=== modified file 'pkg/gnu/gnunet-gtk/sha256sums'
--- a/pkg/gnu/gnunet-gtk/sha256sums 2020-11-14 21:04:48 +0000
+++ b/pkg/gnu/gnunet-gtk/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-8a93127f61b1a44c2485c4c9c7de31399edb23b9c25d9a6d6927f842563d2ca3
download/gnunet-gtk-0.14.0.tar.gz
-dc0ac049c779ebc118a3ed3e93c32984da8620e9d9cfcd9781394c4e622469cb
download/gnunet-gtk-0.14.0.tar.gz.sig
+14b2e5aa943b05ffa835152fc7b227895c45baccbfb4f63110fd93e95185ee1f
download/gnunet-gtk-0.15.0.tar.gz
+5545bc714a4b899f62ece80886b8a74ceb3b910556de313ba2bd08e76f0a4e8c
download/gnunet-gtk-0.15.0.tar.gz.sig
=== modified file 'pkg/gnu/gnunet/Makefile'
--- a/pkg/gnu/gnunet/Makefile 2021-04-04 20:24:56 +0000
+++ b/pkg/gnu/gnunet/Makefile 2021-08-26 05:37:48 +0000
@@ -21,7 +21,7 @@
NAME = GNUnet
GARNAME = gnunet
-GARVERSION = 0.14.1
+GARVERSION = 0.15.2
HOME_URL = http://www.gnu.org/software/gnunet
# see https://gnunet.org/generic-installation-instructions
DESCRIPTION = Secure, decentralized, peer-to-peer networking framework
=== modified file 'pkg/gnu/gnunet/gpg-keyring'
Binary files a/pkg/gnu/gnunet/gpg-keyring 2021-04-04 20:24:56 +0000 and
b/pkg/gnu/gnunet/gpg-keyring 2021-08-26 05:37:48 +0000 differ
=== modified file 'pkg/gnu/gnunet/sha256sums'
--- a/pkg/gnu/gnunet/sha256sums 2021-04-04 20:24:56 +0000
+++ b/pkg/gnu/gnunet/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-4a3205c570c30756f1a8b1ad0f1a63d078a92f0fac8e543471d54f4552da18c2
download/gnunet-0.14.1.tar.gz
-a28ee5035b0ca3c8fed28b7d9959a6abc82f6d8f7c86649ebe6698ff48af530c
download/gnunet-0.14.1.tar.gz.sig
+23e6af170bb47aacb15d27bbe244d871dbc4d0523b1139bd2f12f4b42b65102e
download/gnunet-0.15.2.tar.gz
+5a243073305e977131af5f3da3e923e27cdbb5e66264eb0eaa6b34b28f6a4f45
download/gnunet-0.15.2.tar.gz.sig
=== modified file 'pkg/gnu/gnupg/Makefile'
--- a/pkg/gnu/gnupg/Makefile 2021-04-25 06:14:45 +0000
+++ b/pkg/gnu/gnupg/Makefile 2021-08-26 05:37:48 +0000
@@ -23,7 +23,7 @@
NAME = GnuPG
GARNAME = gnupg
-GARVERSION = 2.3.1
+GARVERSION = 2.3.2
HOME_URL = http://www.gnu.org/software/gnupg
DESCRIPTION = GNU Privacy Guard
define BLURB
=== modified file 'pkg/gnu/gnupg/sha256sums'
--- a/pkg/gnu/gnupg/sha256sums 2021-04-25 06:14:45 +0000
+++ b/pkg/gnu/gnupg/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-c498db346a9b9a4b399e514c8f56dfc0a888ce8f327f10376ff984452cd154ec
download/gnupg-2.3.1.tar.bz2
-894988d190299af18fca136831a33fe3ac99fcbe80516c040d15d86e974eaadb
download/gnupg-2.3.1.tar.bz2.sig
+e1d953e0e296072fca284215103ef168885eaac596c4660c5039a36a83e3041b
download/gnupg-2.3.2.tar.bz2
+3f463c886b7fa0d68f2fe22446a5ee3cf89f54c9b04fcfa9e6a4f16c6058fdf8
download/gnupg-2.3.2.tar.bz2.sig
=== modified file 'pkg/gnu/gpgme/Makefile'
--- a/pkg/gnu/gpgme/Makefile 2021-01-29 17:46:38 +0000
+++ b/pkg/gnu/gpgme/Makefile 2021-08-26 05:37:48 +0000
@@ -21,7 +21,7 @@
NAME = gpgme
GARNAME = gpgme
-GARVERSION = 1.15.1
+GARVERSION = 1.16.0
HOME_URL = http://www.gnu.org/software/gnupg
DESCRIPTION = gpgme, GPG Made Easy, library connection to GNU Privacy Guard
define BLURB
=== modified file 'pkg/gnu/gpgme/sha256sums'
--- a/pkg/gnu/gpgme/sha256sums 2021-01-29 17:46:38 +0000
+++ b/pkg/gnu/gpgme/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-eebc3c1b27f1c8979896ff361ba9bb4778b508b2496c2fc10e3775a40b1de1ad
download/gpgme-1.15.1.tar.bz2
-449672b1d3496d8208e717f9f6c39a3678c76217adecd58152843f4d402f2773
download/gpgme-1.15.1.tar.bz2.sig
+6c8cc4aedb10d5d4c905894ba1d850544619ee765606ac43df7405865de29ed0
download/gpgme-1.16.0.tar.bz2
+200e83de4e3ff166e4f6b14aceee647fcf146a9ac51ad52cd0f921754de4f16c
download/gpgme-1.16.0.tar.bz2.sig
=== modified file 'pkg/gnu/grep/Makefile'
--- a/pkg/gnu/grep/Makefile 2021-08-26 05:12:11 +0000
+++ b/pkg/gnu/grep/Makefile 2021-08-26 05:37:48 +0000
@@ -1,6 +1,6 @@
# Copyright © 2013, 2014, 2016, 2017 Brandon Invergo <brandon@invergo.net>
# Copyright © 2020 Carl Hansen <carlhansen@gnu.org>
-
+#
#
# This file is part of GSRC, the GNU Source Release Collection.
# http://www.gnu.org/software/gsrc
=== modified file 'pkg/gnu/grep/gpg-keyring'
Binary files a/pkg/gnu/grep/gpg-keyring 2020-11-16 02:48:39 +0000 and
b/pkg/gnu/grep/gpg-keyring 2021-08-26 05:37:48 +0000 differ
=== modified file 'pkg/gnu/help2man/Makefile'
--- a/pkg/gnu/help2man/Makefile 2021-04-01 00:30:14 +0000
+++ b/pkg/gnu/help2man/Makefile 2021-08-26 05:37:48 +0000
@@ -22,7 +22,7 @@
NAME = help2man
GARNAME = help2man
-GARVERSION = 1.48.3
+GARVERSION = 1.48.5
HOME_URL = http://www.gnu.org/software/help2man/
DESCRIPTION = Automatically generate man pages from program --help
define BLURB
=== modified file 'pkg/gnu/help2man/gpg-keyring'
Binary files a/pkg/gnu/help2man/gpg-keyring 2021-01-20 05:26:30 +0000 and
b/pkg/gnu/help2man/gpg-keyring 2021-08-26 05:37:48 +0000 differ
=== modified file 'pkg/gnu/help2man/sha256sums'
--- a/pkg/gnu/help2man/sha256sums 2021-04-01 00:30:14 +0000
+++ b/pkg/gnu/help2man/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-8361ff3c643fbd391064e97e5f54592ca28b880eaffbf566a68e0ad800d1a8ac
download/help2man-1.48.3.tar.xz
-fa030a853e2dcf176fa663d25d817b5e0786263f578d106076e9be9186f258e1
download/help2man-1.48.3.tar.xz.sig
+6739e4caa42e6aed3399be4387ca79399640967334e91728863b8eaa922582be
download/help2man-1.48.5.tar.xz
+bfd95cb538668c91cb8e097028585e0cf9599e6936eb4a59083c7010755af1e5
download/help2man-1.48.5.tar.xz.sig
=== modified file 'pkg/gnu/libgcrypt/Makefile'
--- a/pkg/gnu/libgcrypt/Makefile 2021-04-20 20:46:10 +0000
+++ b/pkg/gnu/libgcrypt/Makefile 2021-08-26 05:37:48 +0000
@@ -24,7 +24,7 @@
NAME = Libgcrypt
GARNAME = libgcrypt
-GARVERSION = 1.9.3
+GARVERSION = 1.9.4
HOME_URL = http://www.gnu.org/software/libgcrypt/
DESCRIPTION = Cryptographic function library
define BLURB
=== modified file 'pkg/gnu/libgcrypt/sha256sums'
--- a/pkg/gnu/libgcrypt/sha256sums 2021-04-20 20:46:10 +0000
+++ b/pkg/gnu/libgcrypt/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-97ebe4f94e2f7e35b752194ce15a0f3c66324e0ff6af26659bbfb5ff2ec328fd
download/libgcrypt-1.9.3.tar.bz2
-cc5855e9e97a3db85f1ec7dfd6d29b2e26e602aebd37f8255d9bf013b52c3fe0
download/libgcrypt-1.9.3.tar.bz2.sig
+ea849c83a72454e3ed4267697e8ca03390aee972ab421e7df69dfe42b65caaf7
download/libgcrypt-1.9.4.tar.bz2
+c17a3738d97ae42f236c3245f75c6547fbbcaa256961475fe10244d14bee9806
download/libgcrypt-1.9.4.tar.bz2.sig
=== modified file 'pkg/gnu/mailutils/Makefile'
--- a/pkg/gnu/mailutils/Makefile 2021-03-05 03:35:22 +0000
+++ b/pkg/gnu/mailutils/Makefile 2021-08-26 05:37:48 +0000
@@ -22,7 +22,7 @@
NAME = Mailutils
GARNAME = mailutils
-GARVERSION = 3.12
+GARVERSION = 3.13
HOME_URL = http://www.gnu.org/software/mailutils/
# http://mailutils.org
DESCRIPTION = Utilities and library for reading and serving mail
=== modified file 'pkg/gnu/mailutils/sha256sums'
--- a/pkg/gnu/mailutils/sha256sums 2021-03-05 03:35:22 +0000
+++ b/pkg/gnu/mailutils/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-6d43fa217c4ac63f057de87890c562d170bb92bc402368b5fbc579e4c2b3a158
download/mailutils-3.12.tar.xz
-6affb6133bdf9242d79d0957ac34148174611be5093182f494f23f0dd405585a
download/mailutils-3.12.tar.xz.sig
+d920971dcb49878a009911774fd6404f13d27bd101e2d59b664a28659a4094c7
download/mailutils-3.13.tar.xz
+93e5a1533ee22155c6fb92c507f7eaf9c8447da65751ffaab45b772855d9cde8
download/mailutils-3.13.tar.xz.sig
=== modified file 'pkg/gnu/mcron/Makefile'
--- a/pkg/gnu/mcron/Makefile 2020-08-15 21:31:24 +0000
+++ b/pkg/gnu/mcron/Makefile 2021-08-26 05:37:48 +0000
@@ -1,5 +1,5 @@
# Copyright © 2013, 2014 Brandon Invergo <brandon@invergo.net>
-# Copyright © 2018, 2020 Carl Hansen <carlhansen@gnu.org>
+# Copyright © 2018, 2020, 2021 Carl Hansen <carlhansen@gnu.org>
#
# This file is part of GSRC, the GNU Source Release Collection.
# http://www.gnu.org/software/gsrc
@@ -22,7 +22,7 @@
NAME = Mcron
GARNAME = mcron
-GARVERSION = 1.2.0
+GARVERSION = 1.2.1
HOME_URL = http://www.gnu.org/software/mcron/
DESCRIPTION = Run jobs at scheduled times, cron replacement using Scheme
define BLURB
=== modified file 'pkg/gnu/mcron/sha256sums'
--- a/pkg/gnu/mcron/sha256sums 2020-08-15 21:31:24 +0000
+++ b/pkg/gnu/mcron/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-2d934da84db7dcb988778f55f43a74f699d5825c4900d13ef178965682cd2dd6
download/mcron-1.2.0.tar.gz
-81133358bf1773c540f0ff522217d31a0f3038f3ac9f03d554b9bdc28b880d04
download/mcron-1.2.0.tar.gz.sig
+20fe726c8c53e00261a3a8e191051228b07558292de5abe3714445f1ca10762e
download/mcron-1.2.1.tar.gz
+e212ba1e621599dba2e262f2130792290a610e0504cf42e8131f5bda9d4e82e4
download/mcron-1.2.1.tar.gz.sig
=== modified file 'pkg/gnu/mtools/Makefile'
--- a/pkg/gnu/mtools/Makefile 2021-07-23 17:10:43 +0000
+++ b/pkg/gnu/mtools/Makefile 2021-08-26 05:37:48 +0000
@@ -24,7 +24,7 @@
NAME = mtools
GARNAME = mtools
-GARVERSION = 4.0.34
+GARVERSION = 4.0.35
HOME_URL = http://www.gnu.org/software/mtools/
DESCRIPTION = Access MS-DOS disks without mounting
define BLURB
=== modified file 'pkg/gnu/mtools/sha256sums'
--- a/pkg/gnu/mtools/sha256sums 2021-07-23 17:10:43 +0000
+++ b/pkg/gnu/mtools/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-f1b229bb0bb32c8db7e5fd23c4585d5e1e023589477ce05a68739fc5f657f9f7
download/mtools-4.0.34.tar.lz
-56564523a747569a1b12572046d15edaa454deaa2955a78091584c79460ef5ae
download/mtools-4.0.34.tar.lz.sig
+0778c2a96cce205f1c5b702e2fe2eaacc9af7628ef28b943e1b600a3ddd85dbe
download/mtools-4.0.35.tar.lz
+eb6aadd72d73fec5a99c61075124787e2fc5a6943bcf3427be237ff390bf9650
download/mtools-4.0.35.tar.lz.sig
=== modified file 'pkg/gnu/parallel/Makefile'
--- a/pkg/gnu/parallel/Makefile 2021-07-22 23:52:45 +0000
+++ b/pkg/gnu/parallel/Makefile 2021-08-26 05:37:48 +0000
@@ -22,7 +22,7 @@
NAME = Parallel
GARNAME = parallel
-GARVERSION = 20210722
+GARVERSION = 20210822
HOME_URL = http://www.gnu.org/software/parallel/
DESCRIPTION = Build and execute command lines in parallel
define BLURB
=== modified file 'pkg/gnu/parallel/sha256sums'
--- a/pkg/gnu/parallel/sha256sums 2021-07-22 23:52:45 +0000
+++ b/pkg/gnu/parallel/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-3239094bc043957be191e1e4376716ef0d1b369e545b5bf7d7824b7d46284a49
download/parallel-20210722.tar.bz2
-125b3c61097f76b465e8b05b70a76ca2c4c0222cda30218dd8835d9435449f5e
download/parallel-20210722.tar.bz2.sig
+781659ed2726ef8eafda7e7da898b2488b0c6d3f9251786d218a5c81b1e83822
download/parallel-20210822.tar.bz2
+320d5e872eaedd414bce49bee02e752f99194e8a74fd749f15e597b21e887284
download/parallel-20210822.tar.bz2.sig
=== modified file 'pkg/gnu/pinentry/Makefile'
--- a/pkg/gnu/pinentry/Makefile 2021-01-29 17:47:45 +0000
+++ b/pkg/gnu/pinentry/Makefile 2021-08-26 05:37:48 +0000
@@ -21,7 +21,7 @@
NAME = pinentry
GARNAME = pinentry
-GARVERSION = 1.1.1
+GARVERSION = 1.2.0
HOME_URL = http://www.gnu.org/software/gnupg
DESCRIPTION = pinentry, needed for GNU Privacy Guard
define BLURB
=== modified file 'pkg/gnu/pinentry/sha256sums'
--- a/pkg/gnu/pinentry/sha256sums 2021-01-29 17:47:45 +0000
+++ b/pkg/gnu/pinentry/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-cd12a064013ed18e2ee8475e669b9f58db1b225a0144debdb85a68cecddba57f
download/pinentry-1.1.1.tar.bz2
-0997531fb20f483a475429eac8a3955478ea4d3b59f30dcc782dfdaac9485371
download/pinentry-1.1.1.tar.bz2.sig
+10072045a3e043d0581f91cd5676fcac7ffee957a16636adedaa4f583a616470
download/pinentry-1.2.0.tar.bz2
+fa78068ebbf213f477e5c0e1c0574856bd6dc50006defe3bdd5b6e6904b91ca8
download/pinentry-1.2.0.tar.bz2.sig
=== modified file 'pkg/gnu/sync/Makefile'
--- a/pkg/gnu/sync/Makefile 2020-10-05 01:12:41 +0000
+++ b/pkg/gnu/sync/Makefile 2021-08-26 05:37:48 +0000
@@ -1,4 +1,4 @@
-# Copyright © 2020 Carl Hansen <carlhansen@gnu.org>
+# Copyright © 2020, 2021 Carl Hansen <carlhansen@gnu.org>
#
# This file is part of GSRC, the GNU Source Release Collection.
# http://www.gnu.org/software/gsrc
@@ -21,7 +21,7 @@
NAME = sync
GARNAME = sync
-GARVERSION = 0.8.0
+GARVERSION = 0.8.3
HOME_URL = http://taler.net
DESCRIPTION = An HTTP server that allows clients to backup sensitive data.
define BLURB
=== modified file 'pkg/gnu/sync/gpg-keyring'
Binary files a/pkg/gnu/sync/gpg-keyring 2020-10-05 01:12:41 +0000 and
b/pkg/gnu/sync/gpg-keyring 2021-08-26 05:37:48 +0000 differ
=== modified file 'pkg/gnu/sync/sha256sums'
--- a/pkg/gnu/sync/sha256sums 2020-10-05 01:12:41 +0000
+++ b/pkg/gnu/sync/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-8b6b648de8a6380cfdc8c1839dd12203a2b8a5929afcdb01a44df96b47a24d58
download/sync-0.8.0.tar.gz
-903c2f7dc206e82ba26647a8c82f200eea2a0fcc07023f6e084003a9965babbb
download/sync-0.8.0.tar.gz.sig
+a61a11acc239c989d69d1112d7e71011d96d178629504e41e930aa93fc3d9c75
download/sync-0.8.3.tar.gz
+2a50f82445fde940588b685876bdb42f4e921a8b319257f5e3a22eabbf3cc55f
download/sync-0.8.3.tar.gz.sig
=== modified file 'pkg/gnu/taler-exchange/Makefile'
--- a/pkg/gnu/taler-exchange/Makefile 2020-11-12 07:20:05 +0000
+++ b/pkg/gnu/taler-exchange/Makefile 2021-08-26 05:37:48 +0000
@@ -22,7 +22,7 @@
NAME = taler-exchange
GARNAME = taler-exchange
-GARVERSION = 0.8.1
+GARVERSION = 0.8.4
HOME_URL = http://taler.net
DESCRIPTION = GNU Taler is a privacy-preserving payment system. Exchange part.
define BLURB
=== modified file 'pkg/gnu/taler-exchange/gpg-keyring'
Binary files a/pkg/gnu/taler-exchange/gpg-keyring 2020-11-12 07:20:05
+0000 and b/pkg/gnu/taler-exchange/gpg-keyring 2021-08-26 05:37:48 +0000
differ
=== modified file 'pkg/gnu/taler-exchange/sha256sums'
--- a/pkg/gnu/taler-exchange/sha256sums 2020-11-12 07:20:05 +0000
+++ b/pkg/gnu/taler-exchange/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-30fb779f525777463cf5bd6a0ae17a631a6d4abee17a77d8a7dec94ead59fb1e
download/taler-exchange-0.8.1.tar.gz
-1c36492d1997e438ea0d6ef0a0121982c3a6c1dbb48b279235bde8a7c9c78583
download/taler-exchange-0.8.1.tar.gz.sig
+9184e60e38ba5ded1b129bb208530ae4a30dd749d7f07d23b635c8dcb06c4a5c
download/taler-exchange-0.8.4.tar.gz
+2b87bd4478cfb0aa02d5f2aed1dac178352676b2a2321b804fd4e12f71dc08a1
download/taler-exchange-0.8.4.tar.gz.sig
=== modified file 'pkg/gnu/taler-merchant/Makefile'
--- a/pkg/gnu/taler-merchant/Makefile 2020-12-10 01:39:29 +0000
+++ b/pkg/gnu/taler-merchant/Makefile 2021-08-26 05:37:48 +0000
@@ -22,7 +22,7 @@
NAME = taler-merchant
GARNAME = taler-merchant
-GARVERSION = 0.8.0
+GARVERSION = 0.8.3
HOME_URL = http://taler.net
DESCRIPTION = GNU Taler is a privacy-preserving payment system, merchant part.
define BLURB
=== modified file 'pkg/gnu/taler-merchant/gpg-keyring'
Binary files a/pkg/gnu/taler-merchant/gpg-keyring 2020-12-10 01:39:29
+0000 and b/pkg/gnu/taler-merchant/gpg-keyring 2021-08-26 05:37:48 +0000
differ
=== modified file 'pkg/gnu/taler-merchant/sha256sums'
--- a/pkg/gnu/taler-merchant/sha256sums 2020-12-10 01:39:29 +0000
+++ b/pkg/gnu/taler-merchant/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-b1cac52d77a8422ac6aa173e6d240a465f383df52f8eba75bb117ba5f38807d4
download/taler-merchant-0.8.0.tar.gz
-366ed39620119dacb46d0be3833feebe28c02d3092354d79f6dce22ee290c28a
download/taler-merchant-0.8.0.tar.gz.sig
+9fb62325f63c1d97af93da385db5ecea2b061472e6bac8c27c46fef666802b45
download/taler-merchant-0.8.3.tar.gz
+45f7cfe4d50856991e76ca535b1a11739e1227bc5a2dabc71bf183244555ed28
download/taler-merchant-0.8.3.tar.gz.sig
=== added directory 'pkg/gnu/taler-twister'
=== added file 'pkg/gnu/taler-twister/Makefile'
--- a/pkg/gnu/taler-twister/Makefile 1970-01-01 00:00:00 +0000
+++ b/pkg/gnu/taler-twister/Makefile 2021-08-26 05:37:48 +0000
@@ -0,0 +1,47 @@
+# Copyright ©2021 Carl Hansen <carlhansen@gnu.org>
+#
+# This file is part of GSRC, the GNU Source Release Collection.
+# http://www.gnu.org/software/gsrc
+#
+#
+# GSRC is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# GSRC is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+# License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GSRC. If not, see <http://www.gnu.org/licenses/>.
+#
+#
+# Send bug reports and comments about GSRC problems to bug-gsrc@gnu.org
+
+NAME = taler-bank
+GARNAME = taler-bank
+GARVERSION = 0.8.2
+HOME_URL = http://taler.net
+DESCRIPTION = GNU Taler-twister
+define BLURB
+endef
+
+######################################################################
+
+MASTER_SITES = $(MASTER_GNU)
+MASTER_SUBDIR = taler/
+DISTFILES = $(DISTNAME).tar.gz
+SIGFILES = $(DISTNAME).tar.gz.sig
+
+BUILDDEPS =
+LIBDEPS =
+
+######################################################################
+
+include ../../../gar/gar.lib/auto.mk
+include config.mk
+
+# a python script
+# installation, on your own
=== added file 'pkg/gnu/taler-twister/config.mk'
--- a/pkg/gnu/taler-twister/config.mk 1970-01-01 00:00:00 +0000
+++ b/pkg/gnu/taler-twister/config.mk 2021-08-26 05:37:48 +0000
@@ -0,0 +1,4 @@
+## Configuration options for taler-twister ##
+
+CONFIGURE_OPTS ?=
+BUILD_OPTS ?=
=== added file 'pkg/gnu/taler-twister/gpg-keyring'
Binary files a/pkg/gnu/taler-twister/gpg-keyring 1970-01-01 00:00:00
+0000 and b/pkg/gnu/taler-twister/gpg-keyring 2021-08-26 05:37:48 +0000
differ
=== added file 'pkg/gnu/taler-twister/sha256sums'
--- a/pkg/gnu/taler-twister/sha256sums 1970-01-01 00:00:00 +0000
+++ b/pkg/gnu/taler-twister/sha256sums 2021-08-26 05:37:48 +0000
@@ -0,0 +1,2 @@
+5d3853fb42bda3d98a34371bab7acf613501a67662bf3fe893fa6395102b35db
download/taler-bank-0.8.2.tar.gz
+9a9ce2e6bd6e01f1ec3d7f62a314edf68dccae67dd526a2be5126775e962da59
download/taler-bank-0.8.2.tar.gz.sig
=== modified file 'pkg/gnu/which/Makefile'
--- a/pkg/gnu/which/Makefile 2016-06-17 19:08:15 +0000
+++ b/pkg/gnu/which/Makefile 2021-08-26 05:37:48 +0000
@@ -33,7 +33,7 @@
DISTFILES = $(DISTNAME).tar.gz
SIGFILES = $(DISTNAME).tar.gz.sig
-BUILDDEPS = readline
+BUILDDEPS = # readline
LIBDEPS =
######################################################################
=== modified file 'pkg/gnustep/pikopixel/Makefile'
--- a/pkg/gnustep/pikopixel/Makefile 2021-01-10 05:05:18 +0000
+++ b/pkg/gnustep/pikopixel/Makefile 2021-08-26 05:37:48 +0000
@@ -26,25 +26,26 @@
# see also http://www.gnustep.org/softwareindex
DESCRIPTION = PikoPixel is a free app for drawing and editing pixel-art images.
define BLURB
-
endef
LICENSE = AGPLv3
######################################################################
-#http://twilightedge.com/downloads/PikoPixel.Sources.1.0-b8.tar.gz
#http://twilightedge.com/downloads/PikoPixel.Sources.1.0-b10.tar.gz
+WORKSRC= $(WORKDIR)/PikoPixel.Sources.1.0-b10
+
MASTER_SITES = http://twilightedge.com/
MASTER_SUBDIR = /downloads/
DISTFILES = $(NAME).Sources.$(GARVERSION).tar.gz
-WORKSCR = $(WORKDIR)/$(NAME).Sources.$(GARVERSION)/$(NAME)/
+WORKSCR = $(WORKDIR)/PikoPixel.Sources.1.0-b10/PikoPixel/
SIGFILES =
CONFIGURE_SCRIPTS=
# apt install libicns1 libicns-dev
#
-BUILDDEPS = #gnustep-make gnustep0-base gnustep-gui gnustep-back libobjc2
+BUILDDEPS =
+# gnustep-make gnustep0-base gnustep-gui gnustep-back
LIBDEPS =
# problems compiling
@@ -53,3 +54,4 @@
include ../../../gar/gar.lib/gnustep.mk
include config.mk
+
=== modified file 'pkg/other/atlast/Makefile'
--- a/pkg/other/atlast/Makefile 2021-06-15 17:29:39 +0000
+++ b/pkg/other/atlast/Makefile 2021-08-26 05:37:48 +0000
@@ -53,6 +53,7 @@
include ../../../gar/gar.lib/auto.mk
include config.mk
+.PHONY: post-build custom-pre-install
post-build: build
$(MAKE) -C $(WORKSRC)/benchmark
=== modified file 'pkg/other/boost/Makefile'
--- a/pkg/other/boost/Makefile 2021-07-26 17:40:14 +0000
+++ b/pkg/other/boost/Makefile 2021-08-26 05:37:48 +0000
@@ -21,7 +21,7 @@
NAME = boost
GARNAME = boost
-GARVERSION = 1_77_0_b1
+GARVERSION = 1_77_0
HOME_URL = http://www.boost.org
DESCRIPTION = Peer-reviewed portable C++ source libraries.
define BLURB
@@ -46,8 +46,8 @@
# fixed: . vs _
GARVERSIONDOT:= $(subst _,.,$(GARVERSION))
#ad hoc:
-#MASTER_SUBDIR = artifactory/main/release/$(GARVERSIONDOT)/source/
-MASTER_SUBDIR = artifactory/main/beta/1.77.0.beta1/source/
+MASTER_SUBDIR = artifactory/main/release/$(GARVERSIONDOT)/source/
+#MASTER_SUBDIR = artifactory/main/beta/1.77.0.beta1/source/
DISTFILES = $(GARNAME)_$(GARVERSION).tar.bz2
$(GARNAME)_$(GARVERSION).tar.bz2.json
SIGFILES =
=== modified file 'pkg/other/boost/sha256sums'
--- a/pkg/other/boost/sha256sums 2021-07-26 17:40:14 +0000
+++ b/pkg/other/boost/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-3d5801790c96d2bc9ed23372c4f9fd963bc2f39fe540e35d7b4fe586ba77dfa7
download/boost_1_77_0_b1.tar.bz2
-c09d469e36a7e99295924c92a362d739ea4dcc30ecb515fe7f35485c939b6e77
download/boost_1_77_0_b1.tar.bz2.json
+fc9f85fc030e233142908241af7a846e60630aa7388de9a5fafb1f3a26840854
download/boost_1_77_0.tar.bz2
+8b77e5b3592c8a3a0be031a1c7f902a7c24ef4db8155bf2a712ce5e551585af9
download/boost_1_77_0.tar.bz2.json
=== modified file 'pkg/other/cmake/Makefile'
--- a/pkg/other/cmake/Makefile 2021-07-26 21:46:05 +0000
+++ b/pkg/other/cmake/Makefile 2021-08-26 05:37:48 +0000
@@ -21,7 +21,7 @@
NAME = cmake
GARNAME = cmake
-GARVERSION = 3.21.0
+GARVERSION = 3.21.2
HOME_URL = https://cmake.org/
# or http://kitware.com/cmake
DESCRIPTION = cmake build utility, works with or as "make" or other build
systems
=== modified file 'pkg/other/cmake/config.mk'
--- a/pkg/other/cmake/config.mk 2021-04-29 20:58:35 +0000
+++ b/pkg/other/cmake/config.mk 2021-08-26 05:37:48 +0000
@@ -3,7 +3,7 @@
#CONFIGURE_OPTS ?= -DCURSES_INCLUDE_PATH=$(prefix)
#CONFIGURE_OPTS ?= --no-system-curl
CONFIGURE_OPTS ?=
-BUILD_OPTS ?=
+BUILD_OPTS ?=
OPENSSL_SSL_LIBRARY=$(prefix)/lib64/libssl.so
=== modified file 'pkg/other/cmake/sha256sums'
--- a/pkg/other/cmake/sha256sums 2021-07-26 21:46:05 +0000
+++ b/pkg/other/cmake/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,1 +1,1 @@
-4a42d56449a51f4d3809ab4d3b61fd4a96a469e56266e896ce1009b5768bd2ab
download/cmake-3.21.0.tar.gz
+94275e0b61c84bb42710f5320a23c6dcb2c6ee032ae7d2a616f53f68b3d21659
download/cmake-3.21.2.tar.gz
=== modified file 'pkg/other/gsequencer/Makefile'
--- a/pkg/other/gsequencer/Makefile 2021-07-02 22:15:28 +0000
+++ b/pkg/other/gsequencer/Makefile 2021-08-26 05:37:48 +0000
@@ -21,7 +21,7 @@
NAME = gsequencer
GARNAME = gsequencer
-GARVERSION = 3.9.1
+GARVERSION = 3.9.3
HOME_URL = http://www.nongnu.org/gsequencer/
DESCRIPTION = Audio processing, editing, sequencer.
define BLURB
=== modified file 'pkg/other/gsequencer/sha256sums'
--- a/pkg/other/gsequencer/sha256sums 2021-07-02 22:15:28 +0000
+++ b/pkg/other/gsequencer/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-6cb2afdd18ecb4932fde2952555132a8cecce563eb449f409c586da5b68274c3
download/gsequencer-3.9.1.tar.gz
-f73c5efd3bcc9418c4d84344428c73cf4e9ecb699e15a07a4318a0c854ccd2fc
download/gsequencer-3.9.1.tar.gz.sig
+dea1231e66d4e4fe1327cead03489f0431e372cf029035e2ea3b797713aadc06
download/gsequencer-3.9.3.tar.gz
+0e2ab9a9fa50867bf7ba711aaf425e40c79b829c2031727b95acf1cc5b6e7f28
download/gsequencer-3.9.3.tar.gz.sig
=== modified file 'pkg/other/openssl/Makefile'
--- a/pkg/other/openssl/Makefile 2021-03-25 22:03:28 +0000
+++ b/pkg/other/openssl/Makefile 2021-08-26 05:37:48 +0000
@@ -20,7 +20,7 @@
NAME = openssl
GARNAME = openssl
-GARVERSION = 1.1.1k
+GARVERSION = 1.1.1l
HOME_URL = http://www.openssl.org/
DESCRIPTION = Secure Sockets Layer, TLS, cryptography library
define BLURB
=== modified file 'pkg/other/openssl/sha256sums'
--- a/pkg/other/openssl/sha256sums 2021-03-25 22:03:28 +0000
+++ b/pkg/other/openssl/sha256sums 2021-08-26 05:37:48 +0000
@@ -1,2 +1,2 @@
-892a0875b9872acd04a9fde79b1f943075d5ea162415de3047c327df33fbaee5
download/openssl-1.1.1k.tar.gz
-84694227224235e76b50f7aee7f317ef2accf64f1c46347e892770c2e03c2af0
download/openssl-1.1.1k.tar.gz.sha256
+0b7a3e5e59c34827fe0c3a74b7ec8baef302b98fa80088d7f9153aa16fa76bd1
download/openssl-1.1.1l.tar.gz
+edb30fa7ff58c51fa5bcabfa8dd217156f1954717d0689a8da1a70881ac1109c
download/openssl-1.1.1l.tar.gz.sha256
=== modified file 'setup.sh.in'
--- a/setup.sh.in 2020-09-22 22:53:30 +0000
+++ b/setup.sh.in 2021-08-26 05:37:48 +0000
@@ -61,4 +61,4 @@
# this to reflect the versions of Python that you have installed on
# your system.
export ORIG_PYTHONPATH=$PYTHONPATH
-export
PYTHONPATH=$GSRC/lib/python2.7/site-packages/:$GSRC/lib/python3.8/site-packages${PYTHONPATH:+:$PYTHONPATH}
+export
PYTHONPATH=$GSRC/lib/python2.7/site-packages/:$GSRC/lib/python3.9/site-packages:$GSRC/lib64/python3.9/site-packages:$PYTHONPATH}
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Gsrc-commit] trunk r7781: bucnh of stuff,
Carl Hansen <=