Re: Ublox and GPSD 3.22

[Jeff Curtis]

Hi Gary,

Thanks. Tomorrow I will run a full test case and document it with all the 
details.  

Thanks for the help 

Jeff

Sent from my iPhone

> On Jun 30, 2022, at 11:01 PM, Gary E. Miller <gem@rellim.com> wrote:
> 
> Yo Jeff!
> 
>> On Thu, 30 Jun 2022 21:07:52 -0400
>> Jeff Curtis <jeffreyscurtis@mac.com> wrote:
>> 
>> Forgive me— Here is a raw log with and associated screenshots of xgps
>> and caps showing the lat /lon as zeros-  My story hasn’t changed, to
>> get around the issue I have to use the -p switch so gpsd doesn’t
>> configure the device to ublox mode. This only happened after I
>> upgraded the os and GPSD.
> 
> Once again, when I take your raw log, I see good lat/lon/alt
> 
> $ gpsdecode < 'log (1).raw'
> [...]
> {"class":"TPV","device":"stdin","mode":3,"time":"2022-07-01T00:58:24.000Z","ept":0.005,"lat":40.302825265,"lon":-73.980219058,"altHAE":-27.2387,"altMSL":6.3198,"alt":6.3198,"epx":27.674,"epy":41.046,"epv":75.900,"track":64.9518,"magtrack":52.2391,"magvar":-12.7,"speed":0.024,"climb":0.003,"eps":82.09,"epc":151.80,"ecefx":1344247.43,"ecefy":-4681846.85,"ecefz":4103668.94,"ecefvx":0.02,"ecefvy":0.01,"ecefvz":0.01,"ecefpAcc":20.12,"ecefvAcc":0.85,"velN":0.010,"velE":0.022,"velD":-0.003,"geoidSep":-33.558,"eph":63.080,"sep":88.920}
> 
> See attached for the full output of gpsdecode.
> 
> Looks to me like a broken binary.
> 
> Since ther is no matching info on gpsd version, gpsd startup parameters,
> where the gpsd binary is from, no way for me to comment further.
> 
> 
> 
> RGDS
> GARY
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
>    gem@rellim.com  Tel:+1 541 382 8588
> 
>        Veritas liberabit vos. -- Quid est veritas?
>    "If you can't measure it, you can't improve it." - Lord Kelvin

log1.json
Description: application/json