Re: [gpsd-users] How to use ubxtool with gpsd

[Gary E. Miller]

Yo John!

On Wed, 31 Oct 2018 22:40:39 +0000
John Klug <address@hidden> wrote:

> Here is my gpsd command line:
> 
>   /usr/sbin/gpsd -n -D 1 -F /var/run/gpsd.sock -P /var/run/gpsd.pid  
>       /dev/ttyXRUSB2 /dev/pps0

Why do you need to specify the /dev/pps0?  Why do you use gpsd.sock AND
the tty?

> gps0:/home/mtadm# ubxtool -p PMS                              
> ubxtool: poll PMS
> sent:
> UBX-CFG-PMS:
>  Poll request
> 
> {"class":"ERROR","message":"No path specified in DEVICE, but multiple
> devices are attached."}

Hmm, I guess is should default the first device, you have at least two.

New tool, still kinks to work out.

> gps0:/home/mtadm# ubxtool -p PMS 127.0.0.1:2947:/dev/ttyXRUSB0
> ubxtool: poll PMS
> sent:
> UBX-CFG-PMS:
>  Poll request
> 
> {"class":"ERROR","message":"No such device as /dev/ttyXRUSB0"}
> {"class":"ERROR","message":"Can't open /dev/ttyXRUSB0."}

Use gpspipe to see what devices you have.  Clearly not that one.
You have a ttyXRUSB0 and a ttyXRUSB2?  You use both above.

# gpspipe -w -n 20 | fgrep DEVICE
{"class":"DEVICES","devices":[{"class":"DEVICE","path":"/dev/ttyACM0","driver":"u-blox","subtype":"SW
 ROM CORE 3.01 (107888),HW 00080000,FWVER=SPG 
3.01,PROTVER=18.00,GPS;GLO;GAL;BDS,SBAS;IMES;QZ","activated":"2018-10-31T22:59:32.047Z","flags":1,"native":1,"bps":9600,"parity":"N","stopbits":1,"cycle":1.00,"mincycle":0.25}]}


RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can’t measure it, you can’t improve it." - Lord Kelvin

pgpaPkvfudEfR.pgp
Description: OpenPGP digital signature