Re: [gpsd-users] Telit SE868-V3

[Gary E. Miller]

Yo Martin!

On Fri, 24 Mar 2017 22:01:07 +0000
Martin Townsend <address@hidden> wrote:

> > If you need to do bit picking, then best to write a shim that reads
> > your SPI and serves a /dev/ttyXXX  
> 
> I found this
> https://github.com/actigraph/telit-spi-tty/blob/master/telit_spi.c
> which is a SPI driver for a Telit modem that creates a TTY character
> driver, ignoring the modem stuff I should be able to port this and
> shape it to a Telit SPI TTY GPS driver. So once I get my /dev/ttyGPS0
> or whatever I decide on i just pass this to gpsd and it should start
> reading NMEA messages all being well or do I need some other setup?

Well, then you need to sned us a writeup on how you did it.

But that should be enough to get all your PVT data from the GPS.

Not sure what you intend to do with your data after that, but there
are lot's of well understood patch from gpsd.


RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can’t measure it, you can’t improve it." - Lord Kelvin

pgpdDlaIlyNf7.pgp
Description: OpenPGP digital signature