[gpsd-users] UBlox EVO 7m Speed not Getting Set

[John Klug]

I have to interrupt gpsctl and set the TTY speed myself.  Otherwise the GPS 
goes back to the original speed.

In case I am doing something wrong:

# gpsctl  -f /dev/ttyXRUSB2
/dev/ttyXRUSB2 identified as a u-blox SW 1.00 (59842),HW 00070000,PROTVER 
14.00,GPS;SBAS;GLO;QZSS at 9600 baud.
# gpsctl -f -b -t 'u-blox' -s 115200  /dev/ttyXRUSB2
/dev/ttyXRUSB2 identified as a u-blox SW 1.00 (59842),HW 00070000,PROTVER 
14.00,GPS;SBAS;GLO;QZSS at 9600 baud.
gpsctl:SHOUT: switching to mode BINARY.
# stty -F /dev/ttyXRUSB2 115200
address@hidden:/sys/devices/platform/mts-io# gpsctl -f -b -t 'u-blox' -s 115200 
 /dev/ttyXRUSB2
/dev/ttyXRUSB2 identified as a u-blox SW 1.00 (59842),HW 00070000,PROTVER 
14.00,GPS;SBAS;GLO;QZSS at 9600 baud.
gpsctl:SHOUT: switching to mode BINARY.
# stty -F /dev/ttyXRUSB2       
speed 9600 baud; line = 0;

If I interrupt the gpsctl command the gps switches speed, and I have to 
manually set the line speed.

I think maybe gpsctl does too much.