Re: [gpsd-users] Error while compiling NAN undeclared in gpsdclient.c

[Charles Curley]

On Tue, 08 May 2012 20:06:23 +0200
Bas van Duijnhoven <address@hidden> wrote:

> btw: any tips on how to reduce the (already small) footprint of GPSD
> to an even tinier scale?

Get rid of drivers you don't need. I use:

--------------------------------------------------
#! /bin/bash

# Time-stamp: <2012-05-08 12:26:14 charles tmpmsg.0x27b1f90>

# assume we're in the gpsd build tree.

# ./configure \
scons \
    aivdm=False \
    ashtech=False \
    bluez=False \
    earthmate=False \
    evermore=False \
    fury=False \
    fv18=False \
    garmin=False \
    garmintxt=False \
    geostar=False \
    gpsclock=False \
    ipv6=False \
    itrax=False \
    libgpsmm=False \
    libQgpsmm=False \
    mtk3301=False \
    navcom=False \
    ntrip=False \
    oceanserver=False \
    oldstyle=False \
    oncore=False \
    pps=False \
    pps_on_cts=False \
    rtcm104v2=False \
    rtcm104v3=False \
    shm_export=False \
    superstar2=False \
    tnt=False \
    tripmate=False \
    tsip=False \
    ubx=False \

$*

exit

    debug=True \

This should produce the following:

...
Altered configuration variables:
ashtech = False (default True): Ashtech support
earthmate = False (default True): DeLorme EarthMate Zodiac support
evermore = False (default True): EverMore binary support
fv18 = False (default True): San Jose Navigation FV-18 support
garmin = False (default True): Garmin kernel driver support
garmintxt = False (default True): Garmin Simple Text support
geostar = False (default True): Geostar Protocol support
itrax = False (default True): iTrax hardware support
mtk3301 = False (default True): MTK-3301 support
navcom = False (default True): Navcom support
oncore = False (default True): Motorola OnCore chipset support
superstar2 = False (default True): Novatel SuperStarII chipset support
tnt = False (default True): True North Technologies support
tripmate = False (default True): DeLorme TripMate support
tsip = False (default True): Trimble TSIP support
ubx = False (default True): UBX Protocol support
aivdm = False (default True): AIVDM support
gpsclock = False (default True): GPSClock support
ntrip = False (default True): NTRIP support
oceanserver = False (default True): OceanServer support
rtcm104v2 = False (default True): rtcm104v2 support
rtcm104v3 = False (default True): rtcm104v3 support
pps = False (default True): PPS time syncing support
shm_export = False (default True): export via shared memory
bluez = False (default True): BlueZ support for Bluetooth devices
ipv6 = False (default True): build IPv6 support
oldstyle = False (default True): oldstyle (pre-JSON) protocol support
libgpsmm = False (default True): build C++ bindings
libQgpsmm = False (default True): build QT bindings
...

address@hidden:~/versioned/gpsd$ ./gpsd -l
                        Unknown
n                       Generic NMEA
n       b               SiRF binary
                        JSON slave driver
address@hidden:~/versioned/gpsd$
--------------------------------------------------


-- 

Charles Curley                  /"\    ASCII Ribbon Campaign
Looking for fine software       \ /    Respect for open standards
and/or writing?                  X     No HTML/RTF in email
http://www.charlescurley.com    / \    No M$ Word docs in email

Key fingerprint = CE5C 6645 A45A 64E4 94C0  809C FFF6 4C48 4ECD DFDB