Error message

[monet nisperos]

Dear Gnokii users,

Can someone please help me.  Iam getting this message after executing "gnokii --identify".  The actual problem is like it always pause for awhile after the write command before the "Message sent:"  My model is AT, connection is serial, and port is /dev/ttyACMO.  The mobile phone I am using is Sony Ericsson W760.  It can be recognized by "dmesg" and "lsusb".  

Initializing AT capable
mobile phone ...

Serial device: opening
device /dev/ttyACM0

Serial device: setting RTS
to high and DTR to high

Message sent: 0x00 / 0x0004

41 54 5a 0d                                     | ATZ

write: [ATZ<cr>]

Message sent: 0x00 / 0x0005

41 54 45 31 0d                                  | ATE1

write: [ATE1<cr>]

Message sent: 0x00 / 0x000a

41 54 2b 43 4d 45 45 3d 31
0d                   | AT+CMEE=1       


write:
[AT+CMEE=1<cr>]


Message sent: 0x06 / 0x0007

41 54 2b 47 4d 4d 0d                            | AT+GMM

write: [AT+GMM<cr>]

Message sent: 0x06 / 0x0008

41 54 2b 43 47 4d 4d
0d                         | AT+CGMM

write: [AT+CGMM<cr>]

Initialization failed (11)

Serial device: closing
device

Telephone interface init
failed: Command timed out.

Quitting.

Command timed out.

 

Then I tried using Gammu but when i tried executing gammu --identify it says "Error during reading device"

Please help!

thanks!

Monette