gnokii 0.6.28 getdatetime timesout with Nokia 1650 & 1200
From:
Rohit Chaudhri
Subject:
gnokii 0.6.28 getdatetime timesout with Nokia 1650 & 1200
Date:
Sat, 19 Sep 2009 16:55:25 +0530
Hi, I am using gnokii version 0.6.28 to talk to Nokia 1650 and 1200 phones, using the NK6510 driver. I need to retrieve the phone's date and time, however the gnokii getdatetime command always times out for these phones.
Could someone advise how I could make the getdatetime command work with these phones? I am pasting below the gnokii console log for the command (1650 followed by 1200).
Would appreciate any help regarding this.
Thanks.
//connected to Nokia 1650
./gnokii --getdatetime GNOKII Version 0.6.28 LOG: debug mask is 0x1 Config read from file /home/rohitc/.gnokiirc. phone instance config:
model = 6510 port = /dev/ttyUSB0 connection = serial initlength = default serial_baudrate = 19200 serial_write_usleep = -1 handshake = software require_dcd = 0 smsc_timeout = 10 rfcomm_channel = 0
sm_retry = 0 Connecting Serial device: opening device /dev/ttyUSB0 Serial device: setting speed to 115200 Serial device: setting RTS to low and DTR to low Getting model... Message sent: 0x1b / 0x0006
00 01 00 07 01 00 | [Received Ack of type 1b, seq: 0] [Sending Ack of type 1b, seq: 0] Message received: 0x1b / 0x002e 01 00 00 08 00 01 58 28 00 22 56 20 35 2e 37 31 | X( "V 5.71
0a 31 32 2d 30 39 2d 30 38 0a 52 4d 2d 33 30 35 | 12-09-08 RM-305 0a 28 63 29 20 4e 4d 50 0a 4d 47 00 00 00 | (c) NMP MG Received message type 1b model length: 6 Received model RM-305 Message sent: 0x19 / 0x0006
00 01 00 0a 00 00 | [Received Ack of type 19, seq: 1] Message sent: 0x19 / 0x0006 00 01 00 0a 00 00 | SM_Block: exiting the retry loop
Message sent: 0x19 / 0x0006 00 01 00 0a 00 00 | SM_Block: exiting the retry loop Error: Command timed out. Serial device: closing device
//connected to Nokia 1200
./gnokii --getdatetime GNOKII Version 0.6.28 LOG: debug mask is 0x1 Config read from file /home/rohitc/.gnokiirc. phone instance config: model = 6510 port = /dev/ttyUSB0 connection = serial initlength = default
serial_baudrate = 19200 serial_write_usleep = -1 handshake = software require_dcd = 0 smsc_timeout = 10 rfcomm_channel = 0 sm_retry = 0 Connecting Serial device: opening device /dev/ttyUSB0 Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low Getting model... Message sent: 0x1b / 0x0006 00 01 00 07 01 00 | SM_Block: exiting the retry loop Message sent: 0x1b / 0x0006
00 01 00 07 01 00 | SM_Block: exiting the retry loop Message sent: 0x1b / 0x0006 00 01 00 07 01 00 | SM_Block: exiting the retry loop
Serial device: closing device Serial device: opening device /dev/ttyUSB0 Serial device: setting speed to 115200 Serial device: setting RTS to low and DTR to high Getting model... Message sent: 0x1b / 0x0006
00 01 00 07 01 00 | [Received Ack of type 1b, seq: 0] [Sending Ack of type 1b, seq: 2] Message received: 0x1b / 0x002e 01 00 00 08 00 01 58 28 00 21 56 20 34 2e 30 30 | X( !V 4.00
0a 31 39 2d 31 30 2d 30 37 0a 52 48 2d 39 39 0a | 19-10-07 RH-99 28 63 29 20 4e 4d 50 0a 4d 47 00 00 00 00 | (c) NMP MG Received message type 1b model length: 5 Received model RH-99 Message sent: 0x19 / 0x0006
00 01 00 0a 00 00 | [Received Ack of type 19, seq: 1] Message sent: 0x19 / 0x0006 00 01 00 0a 00 00 | SM_Block: exiting the retry loop
Message sent: 0x19 / 0x0006 00 01 00 0a 00 00 | SM_Block: exiting the retry loop Error: Command timed out. Serial device: closing device
[Prev in Thread]
Current Thread
[Next in Thread]
gnokii 0.6.28 getdatetime timesout with Nokia 1650 & 1200,
Rohit Chaudhri<=