[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Wavecom configuration
From: |
Martyn |
Subject: |
RE: Wavecom configuration |
Date: |
Thu, 17 Sep 2009 16:28:12 +0100 |
Just got back in and this one on the
screen
GNOKII Version 0.6.22
Telephone interface init
failed: Command timed out.
Quitting.
Cannot unlock device.
Command
timed out.
Any ideas please
Martyn
After a little bit of digging I found the following:
-
[global]
port =
/dev/ttyS0
model = AT
initlength = default
connection = serial
use_locking = no
serial_baudrate = 19200
handshake = hardware
connect_script =
disconnect_script =
smsc_timeout = 10
[xgnokii]
allow_breakage = 0
[gnokiid]
bindir = /usr/sbin/
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
[logging]
debug = off
rlpdebug = off
xdebug = off
However when I run the command gnokii --identify it
just sits at the following wit hthe cursor flashing: -
gnokii --identify
GNOKII Version
0.6.22
For info..
dmesg | grep tty
[ 116.322431]
console [tty0] enabled
[ 118.870846] serial8250: ttyS0 at I/O 0x3f8
(irq = 4) is a 16550A
[ 118.871403] 00:02: ttyS0 at I/O 0x3f8 (irq = 4)
is a 16550A
Thanks
Martyn
From:
address@hidden
[mailto:address@hidden On Behalf Of
Martyn
Sent: 17 September 2009 14:29
To:
address@hidden
Subject: Wavecom
configuration
Hi Group, I have just had my new Wavecom Fastrack
Supreme delivered, I'm trying to work out what configuration I need for my
.gnokiirc file.
I'm running Ubuntu 8.04 and have installed Gnokii in
the following way.
apt-get gnokii
Now I need to create the gnokiirc and I have not got
a clue where to go from here, is there a site that I can go check out at all, I
have searched Google but I guess I'm searching for the wrong thing as I get
nothing credible returned.
The Wavecom is connoted to my Serial port.
Sorry if the above is a little vague, this is the
first time I have used a GSM modem along with using Gnokii for the first
time
Looking forward to learning though
Martyn