Trying to make gnokii work (was: Can't make gnokii work)

[Rodolfo Medina]

According to the howto at:

 http://wiki.splitbrain.org/nokia_6630

, I put in ~/.gnokiirc the following stuff:

------------------------------------------
 [global]
 port = /dev/ttyACM0
 model = AT-HW
 initlength = default
 connection = serial
 use_locking = yes
 serial_baudrate = 19200
 smsc_timeout = 10

 [gnokiid]
 bindir = /usr/sbin/
 
 [connect_script]
 TELEPHONE = 12345678

 [disconnect_script]

 [logging]
 debug = off
 rlpdebug = off
 xdebug = off
------------------------------------------

, then connected my Nokia 6630 with its own USB cable to the PC
and started gnokii.
Some commands worked, some not:

 $ gnokii --identify
 GNOKII Version 0.6.5
 IMEI         : 356657005008450
 Manufacturer : Nokia
 Model        : Nokia 6630
 Revision     : V 04wk47_m_v5

 $ gnokii --getphonebook SM 1
 GNOKII Version 0.6.5
 Error: Unknown error - well better than nothing!!

 $ gnokii --monitor
 GNOKII Version 0.6.5
 Entering monitor mode...
 RFLevel: 8
 Battery: 7
 Power Source: battery
 Network: vodafone (Italy), LAC: afe1, CellID: 30f4
 CALL0: IDLE
 CALL1: IDLE
 RFLevel: 8
 Battery: 7
 Power Source: battery
 [etc.]

 $ gnokii --displayoutput
 GNOKII Version 0.6.5
 Lockfile /var/lock/LCK..ttyACM0 is stale. Overriding it..
 Error: Command called isn't implemented in model.

 $ gnokii --getdatetime
 GNOKII Version 0.6.5
 Error: Command called isn't implemented in model.

 $ gnokii --getsms SM 1
 GNOKII Version 0.6.5
 GetSMS SM 1 failed! (Command failed.)


. Please any help?
Do you think it's because my gnokii version is too old, or some other
configuration issue?
Thanks,
Rodolfo