Dear Pavel,
Do you have a usb cable then?Quick work-around.I think your problem
is pretty hard to solve in a short time via mailing-list.
--
Best regards,
Angelo
On 4/14/06, Pavel Khmelinsky <address@hidden> wrote: Thanks for
attention Angelo.
If that's like you said so i could restart IR on my phone and it's
should solve my problem but it didn't.
On 13.04.2006, at 22:16, Angelo Chu wrote:
> Dear Pavel,
>
> I'm using Nokia 8210 with IrDA.The situation is exactly the same as
> you.Your situation arised because if you have no data transfer with
> the phone within designated minutes (refer to your phone's
> manual),the connection will be terminated by your phone.As a
> result,the message from the gnokii will show "Expecting... and some
> kind of error" because the connection is broken.I thought of a work-
> around and write a script to continously sending data to the phone
> with a designated interval say like 30 secs but ultimately,it
> failed.It started smoothly,it generated same error as you after 20
> or so minutes.I can't figure out.As a result,I use my other phone
> with cable to solve my problem and save my time.
>
> I have been searching the mailing list and google all the time,I
> found zero message or reply regarding this problem.So,I suggest you
> should find a better solution instead of figuring out why.That's my
> 10 cents. :-)
>
> --
> Best regards,
> Angelo
>
> On 4/14/06, Pavel Khmelinsky <address@hidden> wrote: Hello!
>
> I have Nokia 6021 and USB-Irda adapter which actually USB<->COM<-
> >IRDA adapter
> as i think.
> It's using pl2303 module and attaching to /dev/ttyUSB0 when i
plug it.
>
> So for setup my irda I am using commands:
> modprobe ma600-sir
> modprobe irtty-sir
> irattach /dev/ttyUSB0 -d ma600 -s
>
> # lsmod | grep ir
> rtty_sir 7936 2
> ma600_sir 3968 1
> sir_dev 18620 2 irtty_sir,ma600_sir
> irda 129720 4 ma600_sir,sir_dev
> crc_ccitt 3072 1 irda
>
> then i starting gnokii. And some times it's work. But for sure only
> once. If
> it's workin and i stop the program next time when i start it it
> will report:
> Serial device: opening device /dev/ttyUSB0
> Expecting:
> Default: Nokia 6021 df2d
> connect: No route to host
> Couldn't open PHONET device: No route to host
> Error in link initialisation: 1
> GSM/FBUS init failed! (Unknown model?). Quitting.
> Serial device: closing device
>
> And after reboot it could work and could not.
> When it's not workin i tried
> echo 115200 > /proc/sys/net/irda/max_baud_rate
> Didn't helped.
>
> I also tried remove all modules and use this:
> modprobe irda
> modprobe irtty-sir
> irattach /dev/ttyUSB0 -s
> In that case lsmod looks like
> # lsmod | grep ir
> irtty_sir 7936 2
> sir_dev 18620 1 irtty_sir
> irda 129720 1 sir_dev
> crc_ccitt 3072 1 irda
>
> In irdadump i am seening my devices but i didn't ever have luck
> with gnokii with
> such modules.
>
> Most strange thing is that sometimes it work. It' ever show me my
> address book
> but segfaulted on the middle of it.
>
> Any ideas where to search for? Any troubleshooting guide?
>
> Regards,
> Pavel.
>
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users
>
>
>
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users
--
Pavel S. Khmelinsky <address@hidden>
System Administrator,
ISP Yauza Telecom
http://www.yauza.ru
_______________________________________________
gnokii-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/gnokii-users
_______________________________________________
gnokii-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/gnokii-users