Item-ID #11992 Application freezes on PC when gnapplet drops

gnokii-users
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Item-ID #11992 Application freezes on PC when gnapplet drops - Nokia 660

From:	Martin Lohre
Subject:	Item-ID #11992 Application freezes on PC when gnapplet drops - Nokia 6600/SUSE 9.1 with KDE 3.3.2
Date:	Tue, 15 Feb 2005 04:02:14 +0100
User-agent:	KMail/1.7.2
Hi,

I issued today the bug below via the bug-tracking system. Is there any work 
around for this? Or in case you already heard about it, if it will be solved 
in one of the next releases?

Until one I was able to copy roughly 100 of something around 450 contacts to 
my mobile by exporting them in smaller numbers. Less then 10 was a good 
number. Numbers above just increased the possibility of failure. But now it 
looks like, that any additional export to the phone will not work.

By the way, there is enough phone memory available, 3,6 MB in the phone and 19 
MB on the MMC card.

Thanks for the help.

Regards,

Martin

P.S. Nice little application, I was tired of changing every time to windows 
just for synchronising my phone book


---------------------------------------------------------------------------------------------------------------------

When trying to export contact from KDE Kontact the application freezes when 
trying to export several contacts to the mobile phone.

The same happens when trying the same thing with xgnokii or gnocky.

The behavior is the following:
After starting gnapplet the export of the contacts to the mobile first some 
messages "write: xxxx" can be seen on the mobiles display. After some 
percentage of the export job is done, gnapplet drops on the mobile phone with 
the message "App. closed Main". After this the exporting application on the 
PC is freezing and is not reacting anymore. The same behavior can be seen 
with KDE Kontact, xgnokii and gnocky, all using libgnockii. A similar 
behavior can be seen, when trying to delete several contact on the mobile 
phone via the PC application.

A hcidump of the connection is added at the end of the report

The mobile phone in use:
Nokia 6600
NHL-10
SW V3.42.1, 16-10-2003

SW on PC:
SUSE Linux 9.1 with kernel-smp 2.6.5-7.111.19
KDE 3.3.2 (unofficial packages from the SUSE homepage)
gnokii 0.6.4 package for fc3 (but the same happens with the 0.6.3 package for 
SUSE)
xgnokii  0.6.3 package provided by SUSE
gnocky 0.0.3 selfcompiled with gcc  3.3.3-41
unfortunately I could not try a selfcompiled version of gnockii due to a lot 
of compiling errors


HCIDump - HCI packet analyzer ver 1.7
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection(0x01|0x0005) plen 13
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Link Key Request(0x17) plen 6
< HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
> HCI Event: Command Complete(0x0e) plen 10
> HCI Event: Connect Complete(0x03) plen 11
< ACL data: handle 0x0029 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Command Complete(0x0e) plen 6
> ACL data: handle 0x0029 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0042 scid 0x0040 result 1 status 2
> HCI Event: Max Slots Change(0x1b) plen 3
> HCI Event: QoS Setup Complete(0x0d) plen 21
> ACL data: handle 0x0029 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0042 scid 0x0040 result 0 status 0
< ACL data: handle 0x0029 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0042 flags 0x0000 clen 4
    MTU 1024
> ACL data: handle 0x0029 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
< ACL data: handle 0x0029 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0042 flags 0x0000 result 0 clen 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 2
    L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 4
    MTU 672
< ACL data: handle 0x0029 flags 0x02 dlen 8
    L2CAP(d): cid 0x42 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
    L2CAP(d): cid 0x40 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 0x0029 flags 0x02 dlen 18
    L2CAP(d): cid 0x42 len 14 [psm 3]
      RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
      dlci 26 frame_type 0 credit_flow 15 pri 7 ack_timer 0 frame_size 667 
max_retrans 0 credits 7
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 2
    L2CAP(d): cid 0x40 len 14 [psm 3]
      RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
      dlci 26 frame_type 0 credit_flow 14 pri 7 ack_timer 0 frame_size 667 
max_retrans 0 credits 3
< ACL data: handle 0x0029 flags 0x02 dlen 8
    L2CAP(d): cid 0x42 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 26 pf 1 ilen 0 fcs 0xe7
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
    L2CAP(d): cid 0x40 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 26 pf 1 ilen 0 fcs 0x2c
< ACL data: handle 0x0029 flags 0x02 dlen 12
    L2CAP(d): cid 0x42 len 8 [psm 3]
      RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
      dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 12
    L2CAP(d): cid 0x40 len 8 [psm 3]
      RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
      dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 12
    L2CAP(d): cid 0x42 len 8 [psm 3]
      RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
      dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> ACL data: handle 0x0029 flags 0x02 dlen 12
    L2CAP(d): cid 0x40 len 8 [psm 3]
      RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
      dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
< ACL data: handle 0x0029 flags 0x02 dlen 9
    L2CAP(d): cid 0x42 len 5 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 1 ilen 0 fcs 0xf8
< ACL data: handle 0x0029 flags 0x02 dlen 18
    L2CAP(d): cid 0x42 len 14 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 10 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 9
    L2CAP(d): cid 0x40 len 5 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 0 fcs 0x22
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 15
    L2CAP(d): cid 0x40 len 107 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 102 fcs 0x22
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 8
    L2CAP(d): cid 0x40 len 100 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 96 fcs 0x3e
< ACL data: handle 0x0029 flags 0x02 dlen 20
    L2CAP(d): cid 0x42 len 16 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 12 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 15
    L2CAP(d): cid 0x40 len 27 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 22 fcs 0x22
< ACL data: handle 0x0029 flags 0x02 dlen 24
    L2CAP(d): cid 0x42 len 20 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 16 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 5
    L2CAP(d): cid 0x40 len 17 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 12 fcs 0x22
< ACL data: handle 0x0029 flags 0x02 dlen 192
< ACL data: handle 0x0029 flags 0x01 dlen 71
    L2CAP(d): cid 0x42 len 259 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 254 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 11
    L2CAP(d): cid 0x40 len 23 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 18 fcs 0x22
< ACL data: handle 0x0029 flags 0x02 dlen 24
    L2CAP(d): cid 0x42 len 20 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 16 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 5
    L2CAP(d): cid 0x40 len 17 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 12 fcs 0x22
< ACL data: handle 0x0029 flags 0x02 dlen 192
< ACL data: handle 0x0029 flags 0x01 dlen 19
    L2CAP(d): cid 0x42 len 207 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 202 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 11
    L2CAP(d): cid 0x40 len 23 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 18 fcs 0x22
< ACL data: handle 0x0029 flags 0x02 dlen 24
    L2CAP(d): cid 0x42 len 20 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 16 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 5
    L2CAP(d): cid 0x40 len 17 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 12 fcs 0x22
< ACL data: handle 0x0029 flags 0x02 dlen 192
< ACL data: handle 0x0029 flags 0x01 dlen 21
    L2CAP(d): cid 0x42 len 209 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 204 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 11
    L2CAP(d): cid 0x40 len 23 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 18 fcs 0x22
< ACL data: handle 0x0029 flags 0x02 dlen 24
    L2CAP(d): cid 0x42 len 20 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 16 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 5
    L2CAP(d): cid 0x40 len 17 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 12 fcs 0x22
< ACL data: handle 0x0029 flags 0x02 dlen 187
    L2CAP(d): cid 0x42 len 183 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 178 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 11
    L2CAP(d): cid 0x40 len 23 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 18 fcs 0x22
< ACL data: handle 0x0029 flags 0x02 dlen 24
    L2CAP(d): cid 0x42 len 20 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 16 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 5
    L2CAP(d): cid 0x40 len 17 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 12 fcs 0x22
< ACL data: handle 0x0029 flags 0x02 dlen 159
    L2CAP(d): cid 0x42 len 155 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 150 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 11
    L2CAP(d): cid 0x40 len 23 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 18 fcs 0x22
< ACL data: handle 0x0029 flags 0x02 dlen 24
    L2CAP(d): cid 0x42 len 20 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 16 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 16
> ACL data: handle 0x0029 flags 0x01 dlen 5
    L2CAP(d): cid 0x40 len 17 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 12 fcs 0x22
< ACL data: handle 0x0029 flags 0x02 dlen 192
< ACL data: handle 0x0029 flags 0x01 dlen 192
< ACL data: handle 0x0029 flags 0x01 dlen 177
    L2CAP(d): cid 0x42 len 557 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 552 fcs 0xe4
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
    L2CAP(d): cid 0x40 len 4 [psm 3]
      RFCOMM(s): DISC: cr 0 dlci 26 pf 1 ilen 0 fcs 0x67
< ACL data: handle 0x0029 flags 0x02 dlen 8
    L2CAP(d): cid 0x42 len 4 [psm 3]
      RFCOMM(s): UA: cr 0 dlci 26 pf 1 ilen 0 fcs 0x4d
< ACL data: handle 0x0029 flags 0x02 dlen 8
    L2CAP(d): cid 0x42 len 4 [psm 3]
      RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 0x0029 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x0042 scid 0x0040
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> HCI Event: Number of Completed Packets(0x13) plen 5
> ACL data: handle 0x0029 flags 0x02 dlen 8
    L2CAP(d): cid 0x40 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 0x0029 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0042 scid 0x0040
< HCI Command: Disconnect(0x01|0x0006) plen 3
> HCI Event: Command Status(0x0f) plen 4
> HCI Event: Disconn Complete(0x05) plen 4
pgp4R6k_qvbEp.pgp
Description: PGP signature
[Prev in Thread]
Current Thread
[Next in Thread]
Item-ID #11992 Application freezes on PC when gnapplet drops - Nokia 6600/SUSE 9.1 with KDE 3.3.2, Martin Lohre <=
Prev by Date: Re: [0.6.4] configure bugs
Next by Date: cpp 3.3.5 fails gnokii sanity check
Previous by thread: [0.6.4] configure bugs
Next by thread: cpp 3.3.5 fails gnokii sanity check
Index(es):
- Date
- Thread