Re: Gnokii doesnt work with 6310i

[Mattia]

On Tue, 25 Nov 2003 00:29:55 +0100
BORBELY Zoltan <address@hidden> wrote:

> Hi,
> 
> On Mon, Nov 24, 2003 at 11:42:27PM +0000, Mattia wrote:
> > I m running Gentoo 1.4. I have a serial cable.
> > If I run  gnokii --identify i get (after 5 mins):
> > 
> > GNOKII Version 0.5.4
> > IMEI         : (unknown)
> > Manufacturer : Nokia
> > Model        : (unknown)
> > Revision     : (unknown)
> 
> Can you send us the relevant settings from gnokiirc?
ok:


 [global]
port = /dev/ttyS0
model = 6310i
initlength = 0
connection = dlr3p
bindir = /home/mattia/gnokii/bin
use_locking = no
serial_baudrate = 19200
smsc_timeout = 10
[connect_script]
TELEPHONE = 12345678
[disconnect_script]

> > I notice that /dev/gnokii was a broken symlink to /dev/ttyp0, so a
> > relink /dev/gnokii to /dev/ttyS0.
> 
> You can leave /dev/gnokii intact. It is the modem device if you want
> to use modem emulation (gnokiid). Modem emulation is only useful for
> older phones (e.g. 6110).
I have installed gnokii 0.5.6. I tried with /dev/ttyS0 and /dev/ttyS1.
If it can help:

GNOKII Version 0.5.6
cfg_file_read - open /root/.gnokiirc: No such file or directory
Opened configuration file /etc/gnokiirc
Added new section global
Adding key/value port//dev/ttyS1
Adding key/value model/6310i
Adding key/value initlength/0
Adding key/value connection/dlr3p
Adding key/value bindir//home/mattia/gnokii/bin
Adding key/value use_locking/no
Adding key/value serial_baudrate/19200
Adding key/value smsc_timeout/10
Added new section connect_script
Adding key/value TELEPHONE/12345678
Added new section disconnect_script
phone instance config:
model: 6310i
port_device: /dev/ttyS1
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
Connecting
Serial device: opening device /dev/ttyS1
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Serial device: opening device /dev/ttyS1
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41                                  |     A
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 0
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
SM_Block Retry - 1
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
IMEI         : (unknown)
Manufacturer : Nokia
Model        : (unknown)
Revision     : (unknown)
Serial device: closing device

real    2m18.345s
user    0m0.000s
sys     0m0.010s

> 
> Bye,
> Bozo
Bye
Mattia

pgpDUKnDpCgTc.pgp
Description: PGP signature