Re: afsk ax.25 transmission using gnu-radio 3.8

[bryan]

Hi Dani,

   Thank you for your email. I have a USRP B200 and I want to use it to send APRS data using AX.25. I tried to use your example but somehow it does not seem to work. Is it ok if you can check what I did and tell me if this is correct or not?

   Thank you very much.

Regards,

Bryan

On Sun, Aug 29, 2021 at 3:15 AM Daniel Estévez <daniel@destevez.net> wrote:

Hi all,

Maybe this example is useful:

https://github.com/daniestevez/gr-satellites/blob/master/examples/ax25/afsk.grc

It uses in-tree blocks and a couple blocks from gr-satellites to
implement an 1k2 AFSK AX.25 transceiver using the soundcard.

Best,

Dani.

El 27/8/21 a las 17:02, Paul Atreides escribió:
> Hi Bryan. I used gr-bruninga quite a bit a few years ago (when I was still in GNURadio  3.7).
> I’ve been working on porting the modulator portion over as a side project, but this package was really old even when three 3.7 was current so some of the internals are very different than the current state. My suggestion would be to get familiar with developing your own blocks using gr-modtool. That particular project was all Python, so this would be a great place to learn if you don’t know already how to make A new module and add blocks to it.
>
> Perhaps we could work on this together, I think it would be really useful for the community!
>
> Please feel free to reach out off the list and we can discuss. If you’re not familiar already with GNURadio I would suggest going through the tutorials for creating your own blocks in order to get comfortable with it first.
>
> <end transmission>
>
>> On Aug 27, 2021, at 04:03, bryan <bryanp80@gmail.com> wrote:
>>
>> 
>> Hi,
>>     Does anybody know of a library that can be used transmit APRS data using ax.25 for gnu-radio 3.8? The library that I have found, like gr-bruninga, will only install on gnu-radio 3.7.
>>     Please help.
>>
>>    Thank you.
>>
>> Regards,
>> Bryan
>