[ 0.000000] Linux version 5.4.31-gnu (nixbld@) (gcc version 7.4.0 (GCC)) #1 SMP 1 [ 0.000000] Command line: BOOT_IMAGE=/gnu/store/g56i8savnfr7981fil03idkjl0syj29d-linux-libre-5.4.31/bzImage --root=31393730-3031-3031-3139-343934363833 --system=/gnu/store/bmgxp95rmz2a22crxp5wq2nqlyj70sx9-system --load=/gnu/store/bmgxp95rmz2a22crxp5wq2nqlyj70sx9-system/boot quiet modprobe.blacklist=radeon [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf8a0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf8a1000-0x00000000bf8a6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf8a7000-0x00000000bf9cefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf9cf000-0x00000000bfa0efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bfa0f000-0x00000000bfb08fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfb09000-0x00000000bfd0efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bfd0f000-0x00000000bfd18fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfd19000-0x00000000bfd1efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bfd1f000-0x00000000bfd5efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfd5f000-0x00000000bfd9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfd9f000-0x00000000bfde1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfde2000-0x00000000bfdfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfdff000-0x00000000bfdfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Acer Aspire 5738 /JV50 , BIOS V1.18 09/17/2009 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2194.316 MHz processor [ 0.004304] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.004306] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.004315] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.004322] MTRR default type: uncachable [ 0.004323] MTRR fixed ranges enabled: [ 0.004325] 00000-9FFFF write-back [ 0.004326] A0000-BFFFF uncachable [ 0.004327] C0000-D3FFF write-protect [ 0.004328] D4000-DBFFF uncachable [ 0.004329] DC000-FFFFF write-protect [ 0.004330] MTRR variable ranges enabled: [ 0.004332] 0 base 000000000 mask F80000000 write-back [ 0.004334] 1 base 080000000 mask FC0000000 write-back [ 0.004335] 2 base 100000000 mask FC0000000 write-back [ 0.004336] 3 disabled [ 0.004337] 4 disabled [ 0.004338] 5 disabled [ 0.004339] 6 disabled [ 0.005285] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.005423] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.005430] last_pfn = 0xbfe00 max_arch_pfn = 0x400000000 [ 0.014767] found SMP MP-table at [mem 0x000f6d00-0x000f6d0f] [ 0.021689] check: Scanning 1 areas for low memory corruption [ 0.021697] BRK [0x55c01000, 0x55c01fff] PGTABLE [ 0.021700] BRK [0x55c02000, 0x55c02fff] PGTABLE [ 0.021702] BRK [0x55c03000, 0x55c03fff] PGTABLE [ 0.021760] BRK [0x55c04000, 0x55c04fff] PGTABLE [ 0.021762] BRK [0x55c05000, 0x55c05fff] PGTABLE [ 0.022124] BRK [0x55c06000, 0x55c06fff] PGTABLE [ 0.022204] BRK [0x55c07000, 0x55c07fff] PGTABLE [ 0.022466] RAMDISK: [mem 0x36b91000-0x375bffff] [ 0.022473] ACPI: Early table checksum verification disabled [ 0.022478] ACPI: RSDP 0x00000000000F6B80 000024 (v02 PTLTD ) [ 0.022482] ACPI: XSDT 0x00000000BFDF4305 00005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000) [ 0.022489] ACPI: FACP 0x00000000BFDE4000 0000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.022496] ACPI: DSDT 0x00000000BFDE5000 00A885 (v02 Intel CANTIGA 06040000 MSFT 03000000) [ 0.022501] ACPI: FACS 0x00000000BFD9DFC0 000040 [ 0.022504] ACPI: FACS 0x00000000BFD9DFC0 000040 [ 0.022508] ACPI: HPET 0x00000000BFDFED86 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.022513] ACPI: MCFG 0x00000000BFDFEDBE 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.022517] ACPI: SLIC 0x00000000BFDFEDFA 000176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001) [ 0.022521] ACPI: APIC 0x00000000BFDFEF70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.022525] ACPI: BOOT 0x00000000BFDFEFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.022530] ACPI: SSDT 0x00000000BFDE3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.022542] ACPI: Local APIC address 0xfee00000 [ 0.022634] No NUMA configuration found [ 0.022635] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.022640] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffcfff] [ 0.022674] Zone ranges: [ 0.022675] DMA32 [mem 0x0000000000001000-0x00000000ffffffff] [ 0.022677] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.022678] Device empty [ 0.022680] Movable zone start for each node [ 0.022680] Early memory node ranges [ 0.022682] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.022683] node 0: [mem 0x0000000000100000-0x00000000bf8a0fff] [ 0.022684] node 0: [mem 0x00000000bf8a7000-0x00000000bf9cefff] [ 0.022685] node 0: [mem 0x00000000bfa0f000-0x00000000bfb08fff] [ 0.022686] node 0: [mem 0x00000000bfd0f000-0x00000000bfd18fff] [ 0.022687] node 0: [mem 0x00000000bfd1f000-0x00000000bfd5efff] [ 0.022688] node 0: [mem 0x00000000bfd9f000-0x00000000bfde1fff] [ 0.022689] node 0: [mem 0x00000000bfdff000-0x00000000bfdfffff] [ 0.022690] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.022719] Zeroed struct page in unavailable ranges: 1299 pages [ 0.022720] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.022722] On node 0 totalpages: 1047277 [ 0.022724] DMA32 zone: 12268 pages used for memmap [ 0.022725] DMA32 zone: 21 pages reserved [ 0.022726] DMA32 zone: 785133 pages, LIFO batch:63 [ 0.049801] Normal zone: 4096 pages used for memmap [ 0.049803] Normal zone: 262144 pages, LIFO batch:63 [ 0.058979] ACPI: PM-Timer IO Port: 0x408 [ 0.058982] ACPI: Local APIC address 0xfee00000 [ 0.058995] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.058996] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.059009] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.059012] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.059014] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.059016] ACPI: IRQ0 used by override. [ 0.059017] ACPI: IRQ9 used by override. [ 0.059020] Using ACPI (MADT) for SMP configuration information [ 0.059022] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.059030] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.059061] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.059063] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.059064] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.059065] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff] [ 0.059066] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff] [ 0.059067] PM: Registered nosave memory: [mem 0x000d4000-0x000e3fff] [ 0.059067] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.059069] PM: Registered nosave memory: [mem 0xbf8a1000-0xbf8a6fff] [ 0.059072] PM: Registered nosave memory: [mem 0xbf9cf000-0xbfa0efff] [ 0.059074] PM: Registered nosave memory: [mem 0xbfb09000-0xbfd0efff] [ 0.059076] PM: Registered nosave memory: [mem 0xbfd19000-0xbfd1efff] [ 0.059078] PM: Registered nosave memory: [mem 0xbfd5f000-0xbfd9efff] [ 0.059080] PM: Registered nosave memory: [mem 0xbfde2000-0xbfdfefff] [ 0.059083] PM: Registered nosave memory: [mem 0xbfe00000-0xffffffff] [ 0.059085] [mem 0xbfe00000-0xffffffff] available for PCI devices [ 0.059087] Booting paravirtualized kernel on bare hardware [ 0.059093] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.059103] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.060168] percpu: Embedded 53 pages/cpu s178520 r8192 d30376 u1048576 [ 0.060181] pcpu-alloc: s178520 r8192 d30376 u1048576 alloc=1*2097152 [ 0.060182] pcpu-alloc: [0] 0 1 [ 0.060226] Built 1 zonelists, mobility grouping on. Total pages: 1030892 [ 0.060228] Policy zone: Normal [ 0.060231] Kernel command line: BOOT_IMAGE=/gnu/store/g56i8savnfr7981fil03idkjl0syj29d-linux-libre-5.4.31/bzImage --root=31393730-3031-3031-3139-343934363833 --system=/gnu/store/bmgxp95rmz2a22crxp5wq2nqlyj70sx9-system --load=/gnu/store/bmgxp95rmz2a22crxp5wq2nqlyj70sx9-system/boot quiet modprobe.blacklist=radeon [ 0.062174] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.063139] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.063204] mem auto-init: stack:byref_all, heap alloc:on, heap free:off [ 0.092714] Calgary: detecting Calgary via BIOS EBDA area [ 0.092716] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.132050] Memory: 4011768K/4189108K available (14339K kernel code, 1525K rwdata, 4180K rodata, 1916K init, 2584K bss, 177340K reserved, 0K cma-reserved) [ 0.132065] random: get_random_u64 called from __kmem_cache_create+0x46/0x570 with crng_init=0 [ 0.132263] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.132290] Kernel/User page tables isolation: enabled [ 0.132321] ftrace: allocating 41660 entries in 163 pages [ 0.159557] rcu: Hierarchical RCU implementation. [ 0.159560] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.159561] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.159562] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.164302] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16 [ 0.166567] Console: colour VGA+ 80x25 [ 0.166573] printk: console [tty0] enabled [ 0.166606] ACPI: Core revision 20190816 [ 0.166723] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.166739] APIC: Switch to symmetric I/O mode setup [ 0.167131] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.186741] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa1397c2c7, max_idle_ns: 440795284995 ns [ 0.186748] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.63 BogoMIPS (lpj=8777264) [ 0.186750] pid_max: default: 32768 minimum: 301 [ 0.186787] LSM: Security Framework initializing [ 0.186794] Yama: becoming mindful. [ 0.186840] AppArmor: AppArmor initialized [ 0.186842] TOMOYO Linux initialized [ 0.186922] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.186948] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.186964] *** VALIDATE tmpfs *** [ 0.187185] *** VALIDATE proc *** [ 0.187272] *** VALIDATE cgroup1 *** [ 0.187274] *** VALIDATE cgroup2 *** [ 0.187341] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.187344] process: using mwait in idle threads [ 0.187348] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.187349] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.187353] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.187355] Spectre V2 : Mitigation: Full generic retpoline [ 0.187356] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.187357] Speculative Store Bypass: Vulnerable [ 0.187361] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.187536] Freeing SMP alternatives memory: 28K [ 0.299094] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.299278] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.299288] ... version: 2 [ 0.299289] ... bit width: 40 [ 0.299290] ... generic registers: 2 [ 0.299291] ... value mask: 000000ffffffffff [ 0.299292] ... max period: 000000007fffffff [ 0.299292] ... fixed-purpose events: 3 [ 0.299293] ... event mask: 0000000700000003 [ 0.299355] rcu: Hierarchical SRCU implementation. [ 0.300424] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.300485] smp: Bringing up secondary CPUs ... [ 0.300672] x86: Booting SMP configuration: [ 0.300673] .... node #0, CPUs: #1 [ 0.302766] smp: Brought up 1 node, 2 CPUs [ 0.302768] smpboot: Max logical packages: 1 [ 0.302770] smpboot: Total of 2 processors activated (8777.26 BogoMIPS) [ 0.304521] devtmpfs: initialized [ 0.304521] x86/mm: Memory block size: 128MB [ 0.304521] PM: Registering ACPI NVS region [mem 0xbfd5f000-0xbfd9efff] (262144 bytes) [ 0.304521] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.304521] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.304521] pinctrl core: initialized pinctrl subsystem [ 0.304521] PM: RTC time: 15:20:32, date: 2020-04-13 [ 0.304521] NET: Registered protocol family 16 [ 0.304521] audit: initializing netlink subsys (disabled) [ 0.304521] audit: type=2000 audit(1586791232.136:1): state=initialized audit_enabled=0 res=1 [ 0.304521] cpuidle: using governor ladder [ 0.304521] cpuidle: using governor menu [ 0.304521] Simple Boot Flag at 0x57 set to 0x1 [ 0.304521] ACPI: bus type PCI registered [ 0.304521] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.304521] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.304521] PCI: not using MMCONFIG [ 0.304521] PCI: Using configuration type 1 for base access [ 0.307037] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.307038] mtrr: probably your BIOS does not setup all CPUs. [ 0.307038] mtrr: corrected configuration. [ 0.309425] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.310888] ACPI: Added _OSI(Module Device) [ 0.310890] ACPI: Added _OSI(Processor Device) [ 0.310891] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.310892] ACPI: Added _OSI(Processor Aggregator Device) [ 0.310894] ACPI: Added _OSI(Linux-Dell-Video) [ 0.310895] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.310896] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.318254] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.319490] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.320226] ACPI: Dynamic OEM Table Load: [ 0.320233] ACPI: SSDT 0xFFFF8CBF3A8CBC00 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.320870] ACPI: Dynamic OEM Table Load: [ 0.320876] ACPI: SSDT 0xFFFF8CBF3B2F3800 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.321732] ACPI: Dynamic OEM Table Load: [ 0.321738] ACPI: SSDT 0xFFFF8CBF3A8BCA00 0001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.322308] ACPI: Dynamic OEM Table Load: [ 0.322313] ACPI: SSDT 0xFFFF8CBF3A891180 00008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.323008] ACPI: EC: EC started [ 0.323010] ACPI: EC: interrupt blocked [ 0.343783] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.343786] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.343788] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.343788] ACPI: Interpreter enabled [ 0.343815] ACPI: (supports S0 S3 S4 S5) [ 0.343816] ACPI: Using IOAPIC for interrupt routing [ 0.343855] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.344738] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.344755] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.345004] ACPI: Enabled 13 GPEs in block 00 to 3F [ 0.356376] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.356383] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.356389] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.356970] PCI host bridge to bus 0000:00 [ 0.356973] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.356975] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.356981] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.356983] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.356985] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.356986] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.356988] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.356990] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window] [ 0.356992] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.356994] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.357008] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.357039] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset [ 0.357041] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability [ 0.357154] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400 [ 0.357214] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.357375] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.357427] pci 0000:00:1a.0: reg 0x20: [io 0x1800-0x181f] [ 0.357596] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.357647] pci 0000:00:1a.1: reg 0x20: [io 0x1820-0x183f] [ 0.357819] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.357844] pci 0000:00:1a.7: reg 0x10: [mem 0xf4504800-0xf4504bff] [ 0.357938] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.358077] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.358101] pci 0000:00:1b.0: reg 0x10: [mem 0xf4500000-0xf4503fff 64bit] [ 0.358186] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.358328] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.358426] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.358569] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.358666] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.358826] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.358924] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.359065] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.359162] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.359304] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.359355] pci 0000:00:1d.0: reg 0x20: [io 0x1840-0x185f] [ 0.359518] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.359569] pci 0000:00:1d.1: reg 0x20: [io 0x1860-0x187f] [ 0.359732] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.359789] pci 0000:00:1d.2: reg 0x20: [io 0x1880-0x189f] [ 0.359965] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300 [ 0.360016] pci 0000:00:1d.3: reg 0x20: [io 0x18a0-0x18bf] [ 0.360187] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.360212] pci 0000:00:1d.7: reg 0x10: [mem 0xf4504c00-0xf4504fff] [ 0.360307] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.360437] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.360637] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 [ 0.360866] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.360888] pci 0000:00:1f.2: reg 0x10: [io 0x18f0-0x18f7] [ 0.360896] pci 0000:00:1f.2: reg 0x14: [io 0x18e4-0x18e7] [ 0.360905] pci 0000:00:1f.2: reg 0x18: [io 0x18e8-0x18ef] [ 0.360913] pci 0000:00:1f.2: reg 0x1c: [io 0x18e0-0x18e3] [ 0.360922] pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18df] [ 0.360931] pci 0000:00:1f.2: reg 0x24: [mem 0xf4504000-0xf45047ff] [ 0.360979] pci 0000:00:1f.2: PME# supported from D3hot [ 0.361104] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.361125] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit] [ 0.361149] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f] [ 0.366809] pci 0000:01:00.0: [1002:9553] type 00 class 0x030000 [ 0.366828] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref] [ 0.366837] pci 0000:01:00.0: reg 0x14: [io 0x2000-0x20ff] [ 0.366845] pci 0000:01:00.0: reg 0x18: [mem 0xf4000000-0xf400ffff] [ 0.366873] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.366880] pci 0000:01:00.0: enabling Extended Tags [ 0.366924] pci 0000:01:00.0: supports D1 D2 [ 0.367021] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300 [ 0.367040] pci 0000:01:00.1: reg 0x10: [mem 0xf4010000-0xf4013fff] [ 0.367086] pci 0000:01:00.1: enabling Extended Tags [ 0.367128] pci 0000:01:00.1: supports D1 D2 [ 0.367212] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.367215] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.367218] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf40fffff] [ 0.367222] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.367465] pci 0000:02:00.0: [14e4:1698] type 00 class 0x020000 [ 0.367506] pci 0000:02:00.0: reg 0x10: [mem 0xf4100000-0xf410ffff 64bit] [ 0.367574] pci 0000:02:00.0: enabling Extended Tags [ 0.367679] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.367854] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.367860] pci 0000:00:1c.0: bridge window [mem 0xf4100000-0xf41fffff] [ 0.367927] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.368022] pci 0000:04:00.0: [8086:4232] type 00 class 0x028000 [ 0.368075] pci 0000:04:00.0: reg 0x10: [mem 0xf4200000-0xf4201fff 64bit] [ 0.368262] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.368423] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.368429] pci 0000:00:1c.2: bridge window [mem 0xf4200000-0xf42fffff] [ 0.368512] acpiphp: Slot [1] registered [ 0.368518] pci 0000:00:1c.4: PCI bridge to [bus 05-07] [ 0.368522] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.368526] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf3ffffff] [ 0.368532] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.368552] pci_bus 0000:0d: extended config space not accessible [ 0.368619] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode) [ 0.368630] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.368632] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.368634] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.368636] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.368638] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.368640] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.368641] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) [ 0.368643] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode) [ 0.368645] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.370810] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) [ 0.370876] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11) [ 0.370941] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11) [ 0.371005] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11) [ 0.371069] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11) [ 0.371134] ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11) [ 0.371198] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.371264] ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11) [ 0.374749] ACPI: EC: interrupt unblocked [ 0.374749] ACPI: EC: event unblocked [ 0.374749] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.374749] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.374795] iommu: Default domain type: Translated [ 0.374795] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.374795] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.374795] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.374795] vgaarb: loaded [ 0.375106] SCSI subsystem initialized [ 0.375157] libata version 3.00 loaded. [ 0.375187] ACPI: bus type USB registered [ 0.375208] usbcore: registered new interface driver usbfs [ 0.375221] usbcore: registered new interface driver hub [ 0.375241] usbcore: registered new device driver usb [ 0.375330] EDAC MC: Ver: 3.0.0 [ 0.375735] PCI: Using ACPI for IRQ routing [ 0.383749] PCI: pci_cache_line_size set to 64 bytes [ 0.383968] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.383970] e820: reserve RAM buffer [mem 0xbf8a1000-0xbfffffff] [ 0.383972] e820: reserve RAM buffer [mem 0xbf9cf000-0xbfffffff] [ 0.383974] e820: reserve RAM buffer [mem 0xbfb09000-0xbfffffff] [ 0.383975] e820: reserve RAM buffer [mem 0xbfd19000-0xbfffffff] [ 0.383977] e820: reserve RAM buffer [mem 0xbfd5f000-0xbfffffff] [ 0.383978] e820: reserve RAM buffer [mem 0xbfde2000-0xbfffffff] [ 0.383979] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff] [ 0.384150] NetLabel: Initializing [ 0.384151] NetLabel: domain hash size = 128 [ 0.384152] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.384180] NetLabel: unlabeled traffic allowed by default [ 0.384205] hpet: 4 channels of 0 reserved for per-cpu timers [ 0.384205] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.384205] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.384868] clocksource: Switched to clocksource tsc-early [ 0.404603] *** VALIDATE bpf *** [ 0.404760] VFS: Disk quotas dquot_6.6.0 [ 0.404788] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.404836] *** VALIDATE ramfs *** [ 0.404840] *** VALIDATE hugetlbfs *** [ 0.405011] AppArmor: AppArmor Filesystem Enabled [ 0.405059] pnp: PnP ACPI init [ 0.405288] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.405324] pnp 00:01: Plug and Play ACPI device, IDs SYN1b22 SYN1b00 SYN0002 PNP0f13 (active) [ 0.405475] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.405482] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.405563] system 00:03: [io 0x0480-0x048f] has been reserved [ 0.405565] system 00:03: [io 0xffff] has been reserved [ 0.405568] system 00:03: [io 0xffff] has been reserved [ 0.405570] system 00:03: [io 0x0400-0x047f] has been reserved [ 0.405572] system 00:03: [io 0x1180-0x11ff] has been reserved [ 0.405574] system 00:03: [io 0xfe00] has been reserved [ 0.405577] system 00:03: [mem 0xff800000-0xff800fff] has been reserved [ 0.405583] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.405621] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.405827] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.405830] system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.405832] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.405834] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.405837] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.405839] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.405845] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.405999] pnp: PnP ACPI: found 6 devices [ 0.408324] thermal_sys: Registered thermal governor 'fair_share' [ 0.408325] thermal_sys: Registered thermal governor 'bang_bang' [ 0.408326] thermal_sys: Registered thermal governor 'step_wise' [ 0.408327] thermal_sys: Registered thermal governor 'user_space' [ 0.408328] thermal_sys: Registered thermal governor 'power_allocator' [ 0.412831] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.412885] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.412889] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.412892] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.412894] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.412897] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 0.412900] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.412902] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.412919] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.412923] pci 0000:00:1c.1: BAR 14: assigned [mem 0xc0200000-0xc03fffff] [ 0.412929] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.412936] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.412940] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.412943] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff] [ 0.412946] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff] [ 0.412952] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0800000-0xc08000ff 64bit] [ 0.412965] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4020000-0xf403ffff pref] [ 0.412967] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.412970] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.412974] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf40fffff] [ 0.412977] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.412981] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.412984] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.412989] pci 0000:00:1c.0: bridge window [mem 0xf4100000-0xf41fffff] [ 0.412993] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.412999] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.413002] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] [ 0.413006] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff] [ 0.413010] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.413016] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.413019] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff] [ 0.413024] pci 0000:00:1c.2: bridge window [mem 0xf4200000-0xf42fffff] [ 0.413027] pci 0000:00:1c.2: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.413034] pci 0000:00:1c.4: PCI bridge to [bus 05-07] [ 0.413036] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.413041] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf3ffffff] [ 0.413045] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.413051] pci 0000:00:1e.0: PCI bridge to [bus 0d] [ 0.413063] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.413065] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.413067] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.413069] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window] [ 0.413071] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window] [ 0.413073] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window] [ 0.413074] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window] [ 0.413076] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xdfffffff window] [ 0.413078] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfebfffff window] [ 0.413080] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.413082] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf40fffff] [ 0.413084] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.413086] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.413087] pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf41fffff] [ 0.413089] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.413091] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.413093] pci_bus 0000:03: resource 1 [mem 0xc0200000-0xc03fffff] [ 0.413095] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.413097] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff] [ 0.413098] pci_bus 0000:04: resource 1 [mem 0xf4200000-0xf42fffff] [ 0.413100] pci_bus 0000:04: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.413102] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 0.413104] pci_bus 0000:05: resource 1 [mem 0xf2000000-0xf3ffffff] [ 0.413106] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.413108] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7 window] [ 0.413110] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff window] [ 0.413111] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.413113] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff window] [ 0.413115] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff window] [ 0.413117] pci_bus 0000:0d: resource 9 [mem 0x000dc000-0x000dffff window] [ 0.413119] pci_bus 0000:0d: resource 10 [mem 0x000e0000-0x000e3fff window] [ 0.413121] pci_bus 0000:0d: resource 11 [mem 0xc0000000-0xdfffffff window] [ 0.413123] pci_bus 0000:0d: resource 12 [mem 0xf0000000-0xfebfffff window] [ 0.413234] NET: Registered protocol family 2 [ 0.413474] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.413566] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.413782] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.413864] TCP: Hash tables configured (established 32768 bind 32768) [ 0.413949] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.413982] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.414043] NET: Registered protocol family 1 [ 0.415488] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.415503] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.415669] PCI: CLS 64 bytes, default 64 [ 0.415798] Trying to unpack rootfs image as initramfs... [ 0.688414] Freeing initrd memory: 10428K [ 0.688435] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.688437] software IO TLB: mapped [mem 0xbb8a1000-0xbf8a1000] (64MB) [ 0.688684] check: Scanning for low memory corruption every 60 seconds [ 0.689273] Initialise system trusted keyrings [ 0.689367] workingset: timestamp_bits=40 max_order=20 bucket_order=0 [ 0.691526] zbud: loaded [ 0.692534] Allocating IMA blacklist keyring. [ 0.697189] Key type asymmetric registered [ 0.697191] Asymmetric key parser 'x509' registered [ 0.697203] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.697257] io scheduler mq-deadline registered [ 0.698410] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.698456] intel_idle: does not run on family 6 model 23 [ 0.698555] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.698612] ACPI: Lid Switch [LID0] [ 0.698659] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.698702] ACPI: Sleep Button [SLPB] [ 0.698751] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.698788] ACPI: Power Button [PWRF] [ 0.699176] Monitor-Mwait will be used to enter C-1 state [ 0.699183] Monitor-Mwait will be used to enter C-2 state [ 0.699188] tsc: Marking TSC unstable due to TSC halts in idle [ 0.699264] clocksource: Switched to clocksource hpet [ 0.725613] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.725615] ACPI: Thermal Zone [TZS0] (50 C) [ 0.737298] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.737301] ACPI: Thermal Zone [TZS1] (50 C) [ 0.737477] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.740390] Linux agpgart interface v0.103 [ 0.744066] brd: module loaded [ 0.747089] loop: module loaded [ 0.747701] libphy: Fixed MDIO Bus: probed [ 0.747703] tun: Universal TUN/TAP device driver, 1.6 [ 0.747763] PPP generic driver version 2.4.2 [ 0.747829] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.747833] ehci-pci: EHCI PCI platform driver [ 0.748049] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.748058] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.748071] ehci-pci 0000:00:1a.7: debug port 1 [ 0.751998] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.752017] ehci-pci 0000:00:1a.7: irq 20, io mem 0xf4504800 [ 0.766857] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.766949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.766954] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.766957] usb usb1: Product: EHCI Host Controller [ 0.766960] usb usb1: Manufacturer: Linux 5.4.31-gnu ehci_hcd [ 0.766964] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.767159] hub 1-0:1.0: USB hub found [ 0.767168] hub 1-0:1.0: 4 ports detected [ 0.767535] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.767541] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.767552] ehci-pci 0000:00:1d.7: debug port 1 [ 0.771467] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.771482] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf4504c00 [ 0.786844] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.786959] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.786963] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.786966] usb usb2: Product: EHCI Host Controller [ 0.786970] usb usb2: Manufacturer: Linux 5.4.31-gnu ehci_hcd [ 0.786973] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.787142] hub 2-0:1.0: USB hub found [ 0.787151] hub 2-0:1.0: 8 ports detected [ 0.787529] ehci-platform: EHCI generic platform driver [ 0.787549] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.787553] ohci-pci: OHCI PCI platform driver [ 0.787568] ohci-platform: OHCI generic platform driver [ 0.787581] uhci_hcd: USB Universal Host Controller Interface driver [ 0.787690] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.787696] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.787703] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.787721] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800 [ 0.787782] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.787784] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.787786] usb usb3: Product: UHCI Host Controller [ 0.787788] usb usb3: Manufacturer: Linux 5.4.31-gnu uhci_hcd [ 0.787790] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.787933] hub 3-0:1.0: USB hub found [ 0.787942] hub 3-0:1.0: 2 ports detected [ 0.788211] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.788217] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.788224] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.788242] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820 [ 0.788321] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.788323] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.788325] usb usb4: Product: UHCI Host Controller [ 0.788326] usb usb4: Manufacturer: Linux 5.4.31-gnu uhci_hcd [ 0.788328] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.788463] hub 4-0:1.0: USB hub found [ 0.788471] hub 4-0:1.0: 2 ports detected [ 0.788698] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.788704] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.788710] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.788728] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 0.788786] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.788788] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.788790] usb usb5: Product: UHCI Host Controller [ 0.788792] usb usb5: Manufacturer: Linux 5.4.31-gnu uhci_hcd [ 0.788793] usb usb5: SerialNumber: 0000:00:1d.0 [ 0.788926] hub 5-0:1.0: USB hub found [ 0.788934] hub 5-0:1.0: 2 ports detected [ 0.789176] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.789182] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.789188] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.789214] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001860 [ 0.789272] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.789274] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.789276] usb usb6: Product: UHCI Host Controller [ 0.789278] usb usb6: Manufacturer: Linux 5.4.31-gnu uhci_hcd [ 0.789279] usb usb6: SerialNumber: 0000:00:1d.1 [ 0.789403] hub 6-0:1.0: USB hub found [ 0.789410] hub 6-0:1.0: 2 ports detected [ 0.789635] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.789644] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.789650] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.789679] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 0.789737] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.789740] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.789742] usb usb7: Product: UHCI Host Controller [ 0.789743] usb usb7: Manufacturer: Linux 5.4.31-gnu uhci_hcd [ 0.789745] usb usb7: SerialNumber: 0000:00:1d.2 [ 0.789879] hub 7-0:1.0: USB hub found [ 0.789887] hub 7-0:1.0: 2 ports detected [ 0.790157] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.790163] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 0.790169] uhci_hcd 0000:00:1d.3: detected 2 ports [ 0.790187] uhci_hcd 0000:00:1d.3: irq 18, io base 0x000018a0 [ 0.790256] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 0.790258] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.790260] usb usb8: Product: UHCI Host Controller [ 0.790261] usb usb8: Manufacturer: Linux 5.4.31-gnu uhci_hcd [ 0.790263] usb usb8: SerialNumber: 0000:00:1d.3 [ 0.790395] hub 8-0:1.0: USB hub found [ 0.790403] hub 8-0:1.0: 2 ports detected [ 0.790656] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.802769] i8042: Detected active multiplexing controller, rev 1.1 [ 0.809894] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.809900] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.809939] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.809974] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.810008] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.810183] mousedev: PS/2 mouse device common for all mice [ 0.810415] rtc_cmos 00:04: RTC can wake from S4 [ 0.810643] rtc_cmos 00:04: registered as rtc0 [ 0.810665] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.810677] i2c /dev entries driver [ 0.810757] device-mapper: uevent: version 1.0.3 [ 0.810846] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: address@hidden [ 0.810851] intel_pstate: CPU model not supported [ 0.810878] ledtrig-cpu: registered to indicate activity on CPUs [ 0.811216] NET: Registered protocol family 10 [ 0.811570] Segment Routing with IPv6 [ 0.811593] NET: Registered protocol family 17 [ 0.811653] Key type dns_resolver registered [ 0.811876] microcode: sig=0x1067a, pf=0x80, revision=0xa07 [ 0.811943] microcode: Microcode Update Driver: v2.2. [ 0.811949] IPI shorthand broadcast: enabled [ 0.812023] registered taskstats version 1 [ 0.812027] Loading compiled-in X.509 certificates [ 0.812061] zswap: loaded using pool lzo/zbud [ 0.812759] Key type big_key registered [ 0.813000] Key type encrypted registered [ 0.813003] AppArmor: AppArmor sha1 policy hashing enabled [ 0.813010] ima: No TPM chip found, activating TPM-bypass! [ 0.813015] ima: Allocated hash algorithm: sha1 [ 0.813025] ima: No architecture policies found [ 0.813045] evm: Initialising EVM extended attributes: [ 0.813046] evm: security.selinux [ 0.813047] evm: security.SMACK64 [ 0.813048] evm: security.SMACK64EXEC [ 0.813048] evm: security.SMACK64TRANSMUTE [ 0.813049] evm: security.SMACK64MMAP [ 0.813050] evm: security.apparmor [ 0.813051] evm: security.ima [ 0.813051] evm: security.capability [ 0.813052] evm: HMAC attrs: 0x1 [ 0.813613] PM: Magic number: 0:825:335 [ 0.813673] tty tty56: hash matches [ 0.813779] rtc_cmos 00:04: setting system clock to 2020-04-13T15:20:32 UTC (1586791232) [ 0.814450] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 0.816962] Freeing unused kernel image memory: 1916K [ 0.830841] Write protecting the kernel read-only data: 22528k [ 0.832226] Freeing unused kernel image memory: 2036K [ 0.833385] Freeing unused kernel image memory: 1964K [ 0.833472] Run /init as init process [ 0.834849] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.940388] ahci 0000:00:1f.2: version 3.0 [ 0.940641] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.940671] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.940674] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems [ 0.975595] scsi host0: ahci [ 0.975847] scsi host1: ahci [ 0.976011] scsi host2: ahci [ 0.976165] scsi host3: ahci [ 0.976320] scsi host4: ahci [ 0.976489] scsi host5: ahci [ 0.976569] ata1: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504100 irq 29 [ 0.976572] ata2: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504180 irq 29 [ 0.976573] ata3: DUMMY [ 0.976574] ata4: DUMMY [ 0.976576] ata5: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504300 irq 29 [ 0.976578] ata6: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504380 irq 29 [ 1.122841] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.340479] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.346924] usb 2-1: New USB device found, idVendor=0b95, idProduct=7720, bcdDevice= 0.01 [ 1.346929] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.346933] usb 2-1: Product: AX88x72A [ 1.346936] usb 2-1: Manufacturer: ASIX Elec. Corp. [ 1.346939] usb 2-1: SerialNumber: 0004FA [ 1.474784] usb 2-5: new high-speed USB device number 3 using ehci-pci [ 1.543048] usb 2-5: New USB device found, idVendor=064e, idProduct=a103, bcdDevice= 5.00 [ 1.543052] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 1.543055] usb 2-5: Product: Video WebCam [ 1.543058] usb 2-5: Manufacturer: SuYin [ 1.543062] usb 2-5: SerialNumber: CN0314-SN30-OV035-VA-R05.00.00 [ 1.557289] random: fast init done [ 1.687979] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133 [ 1.687982] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.690647] ata1.00: configured for UDMA/133 [ 1.690938] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 1A11 PQ: 0 ANSI: 5 [ 1.691178] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.691250] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.691270] sd 0:0:0:0: [sda] Write Protect is off [ 1.691272] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.691321] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.756836] sda: sda1 sda2 sda3 [ 1.757501] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.874786] usb 7-2: new full-speed USB device number 2 using uhci_hcd [ 2.010811] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.012318] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, 1.01, max UDMA/100 [ 2.014112] ata2.00: configured for UDMA/100 [ 2.015840] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N 1.01 PQ: 0 ANSI: 5 [ 2.045721] sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.045723] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.059147] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.059237] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.094826] usb 7-2: New USB device found, idVendor=2087, idProduct=0f01, bcdDevice= 0.00 [ 2.094830] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.094834] usb 7-2: Product: Cando 15.6 Multi Touch Panel with Controller [ 2.094837] usb 7-2: Manufacturer: Cando Corporation [ 2.094840] usb 7-2: SerialNumber: 20090804.001 [ 2.378810] ata5: SATA link down (SStatus 0 SControl 300) [ 2.694810] ata6: SATA link down (SStatus 0 SControl 300) [ 2.697785] usbcore: registered new interface driver usb-storage [ 2.700734] usbcore: registered new interface driver uas [ 2.703229] hidraw: raw HID events driver (C) Jiri Kosina [ 2.710425] usbcore: registered new interface driver usbhid [ 2.710426] usbhid: USB HID core driver [ 2.712787] input: Cando Corporation Cando 15.6 Multi Touch Panel with Controller as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/0003:2087:0F01.0001/input/input8 [ 2.713011] hid-generic 0003:2087:0F01.0001: input,hidraw0: USB HID v1.11 Device [Cando Corporation Cando 15.6 Multi Touch Panel with Controller] on usb-0000:00:1d.2-2/input0 [ 2.734249] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 3.319098] ISO 9660 Extensions: RRIP_1991A [ 12.295976] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) [ 12.296004] random: dbus-uuidgen: uninitialized urandom read (8 bytes read) [ 17.174762] random: crng init done [ 29.212093] shepherd[1]: Service root has been started. [ 39.167805] shepherd[1]: starting services... [ 39.168625] shepherd[1]: Service root-file-system has been started. [ 39.169335] shepherd[1]: Service user-file-systems has been started. [ 39.515389] shepherd[1]: waiting for udevd... [ 40.016869] shepherd[1]: waiting for udevd... [ 40.518288] shepherd[1]: waiting for udevd... [ 40.816595] udevd[193]: starting version 3.2.9 [ 42.204399] shepherd[1]: Service udev has been started. [ 42.205634] shepherd[1]: Service file-system-/tmp has been started. [ 42.206686] shepherd[1]: Service file-system-/dev/pts has been started. [ 42.207826] shepherd[1]: Service file-system-/dev/shm has been started. [ 42.208831] shepherd[1]: Service file-system-/gnu/store has been started. [ 42.209512] shepherd[1]: Service file-systems has been started. [ 42.210242] shepherd[1]: Service user-processes has been started. [ 42.211036] shepherd[1]: Service host-name has been started. [ 44.243060] shepherd[1]: Service user-homes has been started. [ 55.358919] udevd[193]: starting eudev-3.2.9 [ 55.362343] udevd[193]: no sender credentials received, message ignored [ 55.714453] uvesafb: (C) 1988-2005, ATI Technologies Inc. , M92, 01.00, OEM: ATI ATOMBIOS, VBE v3.0 [ 55.729059] uvesafb: VBIOS/hardware supports DDC2 transfers [ 55.791266] uvesafb: monitor limits: vf = 60 Hz, hf = 48 kHz, clk = 69 MHz [ 55.791343] uvesafb: scrolling: redraw [ 55.797150] uvesafb: mode switch failed (eax=0x34f, err=0) - trying again with default timings [ 55.898447] uvesafb: mode switch failed (eax=0x34f, err=0) - trying again with default timings [ 56.000721] Console: switching to colour frame buffer device 128x48 [ 56.000840] uvesafb: mode switch failed (eax=0x34f, err=0) - trying again with default timings [ 56.100745] uvesafb: framebuffer at 0xd0000000, mapped to 0x00000000bf6edef9, using 6144k, total 16384k [ 56.100747] uvesafb: fb0: VESA VGA frame buffer device [ 56.102520] shepherd[1]: Service uvesafb has been started. [ 63.910492] ACPI: AC Adapter [ADP1] (on-line) [ 64.036307] battery: ACPI: Battery Slot [BAT0] (battery present) [ 64.723324] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 64.740252] acpi device:02: registered as cooling_device2 [ 64.740337] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input9 [ 73.178660] pps_core: LinuxPPS API ver. 1 registered [ 73.178661] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 74.944531] PTP clock support registered [ 77.264654] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-213) [ 77.264662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 77.264665] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20190816/utaddress-213) [ 77.264669] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 77.264670] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20190816/utaddress-213) [ 77.264673] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 77.264674] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 79.315919] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 82.520903] input: Cando Corporation Cando 15.6 Multi Touch Panel with Controller as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/0003:2087:0F01.0001/input/input10 [ 82.578980] hid-multitouch 0003:2087:0F01.0001: input,hidraw0: USB HID v1.11 Device [Cando Corporation Cando 15.6 Multi Touch Panel with Controller] on usb-0000:00:1d.2-2/input0 [ 82.591184] tg3.c:v3.137 (May 11, 2014) [ 82.629468] tg3 0000:02:00.0 eth0: Tigon3 [partno(none) rev 5784100] (PCI Express) MAC address 00:26:2d:51:d9:58 [ 82.629471] tg3 0000:02:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 82.629474] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 82.629476] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 82.695649] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 84.546454] mc: Linux media interface: v0.10 [ 87.399517] videodev: Linux video capture interface: v2.00 [ 87.537563] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 90.493636] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 90.828246] asix 2-1:1.0 eth1: register 'asix' at usb-0000:00:1d.7-1, ASIX AX88772 USB 2.0 Ethernet, 00:0e:c6:c3:a7:0a [ 90.828309] usbcore: registered new interface driver asix [ 93.916161] psmouse serio2: synaptics: queried max coordinates: x [..5720], y [..4780] [ 94.001796] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000/0xa0000/0x0, board id: 0, fw id: 529512 [ 94.055179] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input12 [ 95.150386] asix 2-1:1.0 enp0s29f7u1: renamed from eth1 [ 95.166929] tg3 0000:02:00.0 enp2s0: renamed from eth0 [ 95.851094] acer_wmi: Acer Laptop ACPI-WMI Extras [ 95.855498] acer_wmi: Function bitmap for Communication Device: 0x3 [ 98.069461] iTCO_vendor_support: vendor-support=0 [ 99.116182] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 99.116254] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 99.116409] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 101.785332] input: PC Speaker as /devices/platform/pcspkr/input/input16 [ 102.365677] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103) [ 102.388537] uvcvideo 2-5:1.0: Entity type for entity Extension 5 was not initialized! [ 102.388540] uvcvideo 2-5:1.0: Entity type for entity Extension 4 was not initialized! [ 102.388542] uvcvideo 2-5:1.0: Entity type for entity Processing 3 was not initialized! [ 102.388544] uvcvideo 2-5:1.0: Entity type for entity Camera 1 was not initialized! [ 102.388652] input: Video WebCam: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input17 [ 102.388755] usbcore: registered new interface driver uvcvideo [ 102.388756] USB Video Class driver (1.1.1) [ 103.582300] intel_powerclamp: No package C-state available [ 103.619195] intel_powerclamp: No package C-state available [ 106.407528] Error: Driver 'pcspkr' is already registered, aborting... [ 108.265480] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 108.265483] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 108.265485] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 108.265487] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 108.265489] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 108.265490] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 108.265493] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 108.265495] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 108.265497] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 122.373458] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 122.378427] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 122.435542] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 122.435635] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 122.435710] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 123.847160] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 123.847166] cfg80211: failed to load regulatory.db [ 130.270547] Intel(R) Wireless WiFi driver for Linux [ 130.270549] Copyright(c) 2003- 2015 Intel Corporation [ 130.270859] iwlwifi 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 130.271080] 0000:04:00.0: Missing Free firmware (non-Free firmware loading is disabled) [ 130.271180] iwlwifi 0000:04:00.0: Direct firmware load for /*(DEBLOBBED)*/ failed with error -2 [ 130.271183] 0000:04:00.0: Missing Free firmware (non-Free firmware loading is disabled) [ 130.271227] iwlwifi 0000:04:00.0: Direct firmware load for /*(DEBLOBBED)*/ failed with error -2 [ 130.271229] 0000:04:00.0: Missing Free firmware (non-Free firmware loading is disabled) [ 130.271270] iwlwifi 0000:04:00.0: Direct firmware load for /*(DEBLOBBED)*/ failed with error -2 [ 130.271272] 0000:04:00.0: Missing Free firmware (non-Free firmware loading is disabled) [ 130.271314] iwlwifi 0000:04:00.0: Direct firmware load for /*(DEBLOBBED)*/ failed with error -2 [ 130.271316] 0000:04:00.0: Missing Free firmware (non-Free firmware loading is disabled) [ 130.271353] iwlwifi 0000:04:00.0: Direct firmware load for /*(DEBLOBBED)*/ failed with error -2 [ 130.271356] iwlwifi 0000:04:00.0: no suitable firmware found! [ 130.271369] iwlwifi 0000:04:00.0: minimum version required: /*(DEBLOBBED)*/1 [ 130.271389] iwlwifi 0000:04:00.0: maximum version supported: /*(DEBLOBBED)*/5 [ 130.271404] iwlwifi 0000:04:00.0: check /*(DEBLOBBED)*/ [ 425.864752] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s29f7u1: link becomes ready [ 425.867989] asix 2-1:1.0 enp0s29f7u1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 429.079326] 8021q: 802.1Q VLAN Support v1.8 [ 458.762938] sda: sda1 sda2 sda3 [ 464.341024] sda: sda1 sda2 sda3 [ 465.705257] sda: sda1 sda2 sda3 [ 465.708617] sda: sda1 sda2 sda3 [ 471.841125] sda: sda1 sda2 [ 477.849691] sda: sda1 sda2 [ 491.192946] cryptd: max_cpu_qlen set to 1000 [ 516.904292] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 540.955195] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 592.170506] perf: interrupt took too long (3131 > 3126), lowering kernel.perf_event_max_sample_rate to 63750 [ 795.124104] perf: interrupt took too long (3916 > 3913), lowering kernel.perf_event_max_sample_rate to 51000