[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xlog-discussion] Cwdaemon

From: Ed
Subject: Re: [Xlog-discussion] Cwdaemon
Date: Mon, 23 Sep 2013 12:50:34 -0400
User-agent: Mozilla/5.0 (X11; Linux i686; rv:17.0) Gecko/20130803 Thunderbird/17.0.8

On 09/23/2013 12:18 PM, John wrote:
On 09/23/2013 03:54 PM, Ed wrote:
On 09/23/2013 11:40 AM, John wrote:
Still trying... on fresh cold boots the last two mornings, "ps -A" shows
no cwdaemon running. (Everybody probably knows this, but I had to try it
anyway: starting Xlog does not start cwdaemon.) I started cwdaemon  with
"sudo /usr/sbin ./cwdaemon". Another "ps -A" then shows it running.
Xlog's keyer continues not to function.

Have you checked your bios to make sure the parallel port is
configured correctly ? If not, cwdaemon may not run.


Thank you for your patience, Ed. Yes, I checked that a couple of days
ago, and as far as I can tell, it looks OK. From the BIOS notes I took:
Par port adr: 378; Mode ECP; IRQ7; DMA channel DMA3.

There is nothing actually plugged into the parallel port because I
haven't  yet fabricated the transceiver cable. I didn't figure that
would keep the daemon from producing a sidetone.

I just checked on my Mint 14 install and the cwdaemon is started at boot.

1413 ?        00:00:07 cwdaemon


reply via email to

[Prev in Thread] Current Thread [Next in Thread]