[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Uisp-dev] Example command lines?

From: Jason Kyle
Subject: Re: [Uisp-dev] Example command lines?
Date: Wed, 18 Dec 2002 12:10:05 +1300

At 12:44 17/12/2002, Bob Paddock wrote:

> The -dpart option should not be case sensitive. You are missing the
> -dprog=stk500 option. This command should work for you:
>   $ uisp -dpart=stk500 -dserial=/dev/ttyS1 -dpart=AT90S8515 --rd_fuses

I think you mean -dprog=stk500 there.

The first time I run, after cycling power, I get this:
/usr/local/bin/uisp -dprog=stk500 -dserial=/dev/ttyS1 -dpart=AT90S8515
Programmer is not responding.

Not sure but I wonder if the serial data rate is wrong, the STK500 works at 115200bps. Might be an idea to add the serial speed to your command line to be certain. From memory the earlier non-stk500 versions of uisp had a default of 19200.

Jason Kyle

reply via email to

[Prev in Thread] Current Thread [Next in Thread]