[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Tlf-devel] Upload tlf-0.9.4 with band info output.

From: rein couperus PA0R
Subject: [Tlf-devel] Upload tlf-0.9.4 with band info output.
Date: Mon, 27 Oct 2003 23:19:01 +0100

New upload: tlf-0.9.4, tested last weekend. From the README:

- added band output routine for cwdaemon-0.7
        New parameter: BANDOUTPUT to activate.
        Cwdaemon-0.7 will output band info on pins 2, 7,8 and 9 of the
        parallel port. 160m = 1, 80m = 2 .... 10m = 9. This default is 
with commercial band decoders.  
        You can also use non-standard coding:
        BANDOUTPUT=12484848 will put pin 9 high to switch your 3-bander etc... 
        need for a decoder, a few relays will do... unless you also want to 
your bandfilters (the coding is for 160,80,40,30,20,17,15,12,10).

- known bugs:
        tlf seg faults when switching from the NEEDED band map to the spot list
        with very large band maps (the 10m bandmap had 150 entries during 
sunday afternoon)
        ce0y/sp9spt shows up as Poland instad of Easter Island...


Rein PA0R

Email: address@hidden or address@hidden,

reply via email to

[Prev in Thread] Current Thread [Next in Thread]