[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Texmacs-dev] network file systems on Windows?

From: lid lor
Subject: Re: [Texmacs-dev] network file systems on Windows?
Date: Wed, 9 Dec 2020 20:15:17 +0100

Dear all,

I just checked with TeXmacs 1.99.16 (the last version I found) on Windows 10.
Unfortunately the behaviour remains basically the same, with the same errors.
Only the loading requester seems a bit more responsive when navigating the network disks, but at the end no file is opened, with basically the same error of the version 1.99.11 (“The file //somenetwork/somefile.tm cannot be loaded or created“). There is the same backslash -> slash inversion, and again, when exporting, the same errors show up (e.g. .pdf and .ps exporting works, all the other not).

PS I should add that, as explained by Denis, if you map the network path to the local filesystem (\\somenetwork\  e.g. mapped as Z: ) everything is fine (both with version 1.99.11 and 1.99.16)

on 4 December 2020 at 15:45:03, TeXmacs (texmacs@lix.polytechnique.fr) wrote:
Hi Lorenzo,

On Fri, Dec 04, 2020 at 02:48:30PM +0100, lid lor wrote:
> Not immediately, unfortunately.
> It will require asking the IT guys to install the updated version, and
> this is going to take some days.

OK, please let us know when you can test with the current version.
I am afraid that the problem will still be present,
but we have changed quite a few things, so one never knows...
Thanks for your help in any case.

Best wishes, --Joris

Texmacs-dev mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]