[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[5423] headitem, sync
From: |
karl |
Subject: |
[5423] headitem, sync |
Date: |
Wed, 19 Mar 2014 17:59:14 +0000 |
Revision: 5423
http://svn.sv.gnu.org/viewvc/?view=rev&root=texinfo&revision=5423
Author: karl
Date: 2014-03-19 17:59:13 +0000 (Wed, 19 Mar 2014)
Log Message:
-----------
headitem, sync
Modified Paths:
--------------
trunk/NEWS
trunk/build-aux/texinfo.tex
trunk/doc/texinfo.tex
Modified: trunk/NEWS
===================================================================
--- trunk/NEWS 2014-03-19 17:54:56 UTC (rev 5422)
+++ trunk/NEWS 2014-03-19 17:59:13 UTC (rev 5423)
@@ -33,6 +33,7 @@
. new customization variable INDEX_SPECIAL_CHARS_WARNING to complain
when index entries contain a colon.
. Docbook output no longer uses <lineannotation> for @r.
+ . -D'var val' works again.
* install-info:
. handle compressed input file names containing spaces.
Modified: trunk/build-aux/texinfo.tex
===================================================================
--- trunk/build-aux/texinfo.tex 2014-03-19 17:54:56 UTC (rev 5422)
+++ trunk/build-aux/texinfo.tex 2014-03-19 17:59:13 UTC (rev 5423)
@@ -3,11 +3,11 @@
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2013-09-11.11}
+\def\texinfoversion{2014-03-18.17}
%
% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-% 2007, 2008, 2009, 2010, 2011, 2012, 2013 Free Software Foundation, Inc.
+% 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Free Software Foundation, Inc.
%
% This texinfo.tex file is free software: you can redistribute it and/or
% modify it under the terms of the GNU General Public License as
@@ -1138,10 +1138,12 @@
\ifpdf
%
- % Color manipulation macros based on pdfcolor.tex,
+ % Color manipulation macros using ideas from pdfcolor.tex,
% except using rgb instead of cmyk; the latter is said to render as a
% very dark gray on-screen and a very dark halftone in print, instead
- % of actual black.
+ % of actual black. The dark red here is dark enough to print on paper as
+ % nearly black, but still distinguishable for online viewing. We use
+ % black by default, though.
\def\rgbDarkRed{0.50 0.09 0.12}
\def\rgbBlack{0 0 0}
%
@@ -1251,10 +1253,9 @@
% used to mark target names; must be expandable.
\def\pdfmkpgn#1{#1}
%
- % by default, use a color that is dark enough to print on paper as
- % nearly black, but still distinguishable for online viewing.
- \def\urlcolor{\rgbDarkRed}
- \def\linkcolor{\rgbDarkRed}
+ % by default, use black for everything.
+ \def\urlcolor{\rgbBlack}
+ \def\linkcolor{\rgbBlack}
\def\endlink{\setcolor{\maincolor}\pdfendlink}
%
% Adding outlines to PDF; macros for calculating structure of outlines
@@ -2574,37 +2575,21 @@
\let\file=\code
\let\option=\code
-% @uref (abbreviation for `urlref') takes an optional (comma-separated)
-% second argument specifying the text to display and an optional third
-% arg as text to display instead of (rather than in addition to) the url
-% itself. First (mandatory) arg is the url.
-% (This \urefnobreak definition isn't used now, leaving it for a while
-% for comparison.)
-\def\urefnobreak#1{\dourefnobreak #1,,,\finish}
-\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup
- \unsepspaces
- \pdfurl{#1}%
- \setbox0 = \hbox{\ignorespaces #3}%
- \ifdim\wd0 > 0pt
- \unhbox0 % third arg given, show only that
- \else
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \ifpdf
- \unhbox0 % PDF: 2nd arg given, show only it
- \else
- \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
- \fi
- \else
- \code{#1}% only url given, so show it
- \fi
- \fi
- \endlink
-\endgroup}
+% @uref (abbreviation for `urlref') aka @url takes an optional
+% (comma-separated) second argument specifying the text to display and
+% an optional third arg as text to display instead of (rather than in
+% addition to) the url itself. First (mandatory) arg is the url.
-% This \urefbreak definition is the active one.
+% TeX-only option to allow changing PDF output to show only the second
+% arg (if given), and not the url (which is then just the link target).
+\newif\ifurefurlonlylink
+
+% The main macro is \urefbreak, which allows breaking at expected
+% places within the url. (There used to be another version, which
+% didn't support automatic breaking.)
\def\urefbreak{\begingroup \urefcatcodes \dourefbreak}
\let\uref=\urefbreak
+%
\def\dourefbreak#1{\urefbreakfinish #1,,,\finish}
\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example
\unsepspaces
@@ -2613,12 +2598,19 @@
\ifdim\wd0 > 0pt
\unhbox0 % third arg given, show only that
\else
- \setbox0 = \hbox{\ignorespaces #2}%
+ \setbox0 = \hbox{\ignorespaces #2}% look for second arg
\ifdim\wd0 > 0pt
\ifpdf
- \unhbox0 % PDF: 2nd arg given, show only it
+ \ifurefurlonlylink
+ % PDF plus option to not display url, show just arg
+ \unhbox0
+ \else
+ % PDF, normally display both arg and url for consistency,
+ % visibility, if the pdf is eventually used to print, etc.
+ \unhbox0\ (\urefcode{#1})%
+ \fi
\else
- \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url
+ \unhbox0\ (\urefcode{#1})% DVI, always show arg and url
\fi
\else
\urefcode{#1}% only url given, so show it
@@ -2658,8 +2650,10 @@
% we put a little stretch before and after the breakable chars, to help
% line breaking of long url's. The unequal skips make look better in
% cmtt at least, especially for dots.
-\def\urefprestretch{\urefprebreak \hskip0pt plus.13em }
-\def\urefpoststretch{\urefpostbreak \hskip0pt plus.1em }
+\def\urefprestretchamount{.13em}
+\def\urefpoststretchamount{.1em}
+\def\urefprestretch{\urefprebreak \hskip0pt plus\urefprestretchamount\relax}
+\def\urefpoststretch{\urefpostbreak \hskip0pt plus\urefprestretchamount\relax}
%
\def\urefcodeamp{\urefprestretch \&\urefpoststretch}
\def\urefcodedot{\urefprestretch .\urefpoststretch}
@@ -3691,7 +3685,7 @@
\parskip=\smallskipamount
\ifdim\parskip=0pt \parskip=2pt \fi
%
- % Try typesetting the item mark that if the document erroneously says
+ % Try typesetting the item mark so that if the document erroneously says
% something like @itemize @samp (intending @table), there's an error
% right away at the @itemize. It's not the best error message in the
% world, but it's better than leaving it to the @item. This means if
@@ -3941,19 +3935,23 @@
}
% multitable-only commands.
-%
-% @headitem starts a heading row, which we typeset in bold.
-% Assignments have to be global since we are inside the implicit group
-% of an alignment entry. \everycr resets \everytab so we don't have to
+%
+% @headitem starts a heading row, which we typeset in bold. Assignments
+% have to be global since we are inside the implicit group of an
+% alignment entry. \everycr below resets \everytab so we don't have to
% undo it ourselves.
\def\headitemfont{\b}% for people to use in the template row; not changeable
\def\headitem{%
\checkenv\multitable
\crcr
+ \gdef\headitemcrhook{\nobreak}% attempt to avoid page break after headings
\global\everytab={\bf}% can't use \headitemfont since the parsing differs
\the\everytab % for the first item
}%
%
+% default for tables with no headings.
+\let\headitemcrhook=\relax
+%
% A \tab used to include \hskip1sp. But then the space in a template
% line is not enough. That is bad. So let's go back to just `&' until
% we again encounter the problem the 1sp was intended to solve.
@@ -3984,15 +3982,15 @@
%
\everycr = {%
\noalign{%
- \global\everytab={}%
+ \global\everytab={}% Reset from possible headitem.
\global\colcount=0 % Reset the column counter.
- % Check for saved footnotes, etc.
+ %
+ % Check for saved footnotes, etc.:
\checkinserts
- % Keeps underfull box messages off when table breaks over pages.
- %\filbreak
- % Maybe so, but it also creates really weird page breaks when the
- % table breaks over pages. Wouldn't \vfil be better? Wait until the
- % problem manifests itself, so it can be fixed for real --karl.
+ %
+ % Perhaps a \nobreak, then reset:
+ \headitemcrhook
+ \global\let\headitemcrhook=\relax
}%
}%
%
@@ -4434,7 +4432,7 @@
% complicated, when \tex is in effect and \{ is a \delimiter again.
% We can't use \lbracecmd and \rbracecmd because texindex assumes
% braces and backslashes are used only as delimiters. Perhaps we
- % should define @lbrace and @rbrace commands a la @comma.
+ % should use @lbracechar and @rbracechar?
\def\{{{\tt\char123}}%
\def\}{{\tt\char125}}%
%
@@ -4455,9 +4453,8 @@
% @end macro
% ...
% @funindex commtest
+ % This is not enough to reproduce the bug, but it gives the flavor.
%
- % The above is not enough to reproduce the bug, but it gives the flavor.
- %
% Sample whatsit resulting:
% address@hidden@folio address@hidden address@hidden }}}
%
@@ -4657,8 +4654,21 @@
\definedummyword\verb
\definedummyword\w
\definedummyword\xref
+ %
+ % Consider:
+ % @macro mkind{arg1,arg2}
+ % @cindex \arg2\
+ % @end macro
+ % @mkind{foo, bar}
+ % The space after the comma will end up in the temporary definition
+ % that we make for arg2 (see \parsemargdef ff.). We want all this to be
+ % expanded for the sake of the index, so we end up just seeing "bar".
+ \let\xeatspaces = \eatspaces
}
+% For testing: output @{ and @} in index sort strings as \{ and \}.
+\newif\ifusebracesinindexes
+
% \indexnofonts is used when outputting the strings to sort the index
% by, and when constructing control sequence names. It eliminates all
% control sequences and just writes whatever the best ASCII sort string
@@ -4687,11 +4697,16 @@
% Unfortunately, texindex is not prepared to handle braces in the
% content at all. So for index sorting, we map @{ and @} to strings
% starting with |, since that ASCII character is between ASCII { and }.
- \def\{{|a}%
- \def\lbracechar{|a}%
+ \ifusebracesinindexes
+ \def\lbracechar{\lbracecmd}%
+ \def\rbracechar{\rbracecmd}%
+ \else
+ \def\lbracechar{|a}%
+ \def\rbracechar{|b}%
+ \fi
+ \let\{=\lbracechar
+ \let\}=\rbracechar
%
- \def\}{|b}%
- \def\rbracechar{|b}%
%
% Non-English letters.
\def\AA{AA}%
@@ -6419,8 +6434,6 @@
% side, and for 6pt waste from
% each corner char, and rule thickness
\normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
- % Flag to tell @lisp, etc., not to narrow margin.
- \let\nonarrowing = t%
%
% If this cartouche directly follows a sectioning command, we need the
% \parskip glue (backspaced over by default) or the cartouche can
@@ -6587,9 +6600,13 @@
% @raggedright does more-or-less normal line breaking but no right
-% justification. From plain.tex.
+% justification. From plain.tex. Don't stretch around special
+% characters in urls in this environment, since the stretch at the right
+% should be enough.
\envdef\raggedright{%
- \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax
+ \rightskip0pt plus2.4em \spaceskip.3333em \xspaceskip.5em\relax
+ \def\urefprestretchamount{0pt}%
+ \def\urefpoststretchamount{0pt}%
}
\let\Eraggedright\par
@@ -7482,7 +7499,7 @@
% Parse the optional {params} list. Set up \paramno and \paramlist
% so \defmacro knows what to do. Define \macarg.BLAH for each BLAH
-% in the params list to some hook where the argument si to be expanded. If
+% in the params list to some hook where the argument is to be expanded. If
% there are less than 10 arguments that hook is to be replaced by ##N where N
% is the position in that list, that is to say the macro arguments are to be
% defined `a la TeX in the macro body.
@@ -8344,6 +8361,7 @@
\gdef\footnote{%
\let\indent=\ptexindent
\let\noindent=\ptexnoindent
+ %
\global\advance\footnoteno by address@hidden
\edef\thisfootno{$^{\the\footnoteno}$}%
%
@@ -8367,6 +8385,11 @@
%
\gdef\dofootnote{%
\insert\footins\bgroup
+ %
+ % Nested footnotes are not supported in TeX, that would take a lot
+ % more work. (\startsavinginserts does not suffice.)
+ \let\footnote=\errfootnote
+ %
% We want to typeset this text as a normal paragraph, even if the
% footnote reference occurs in (for example) a display environment.
% So reset some parameters.
@@ -8404,13 +8427,19 @@
}
}%end \catcode address@hidden
+\def\errfootnote{%
+ \errhelp=\EMsimple
+ \errmessage{Nested footnotes not supported in texinfo.tex,
+ even though they work in makeinfo; sorry}
+}
+
% In case a @footnote appears in a vbox, save the footnote text and create
% the real \insert just after the vbox finished. Otherwise, the insertion
% would be lost.
% Similarly, if a @footnote appears inside an alignment, save the footnote
% text to a box and make the \insert when a row of the table is finished.
% And the same can be done for other insert classes. --kasal, 16nov03.
-
+%
% Replace the \insert primitive by a cheating macro.
% Deeper inside, just make sure that the saved insertions are not spilled
% out prematurely.
Modified: trunk/doc/texinfo.tex
===================================================================
--- trunk/doc/texinfo.tex 2014-03-19 17:54:56 UTC (rev 5422)
+++ trunk/doc/texinfo.tex 2014-03-19 17:59:13 UTC (rev 5423)
@@ -3,7 +3,7 @@
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2014-03-17.07}
+\def\texinfoversion{2014-03-18.17}
%
% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [5423] headitem, sync,
karl <=