[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
texinfo update (Sun Jul 8 09:23:01 EDT 2007)
|
From: |
Karl Berry |
|
Subject: |
texinfo update (Sun Jul 8 09:23:01 EDT 2007) |
|
Date: |
Sun, 08 Jul 2007 09:23:04 -0400 |
Index: ChangeLog
===================================================================
RCS file: /sources/texinfo/texinfo/ChangeLog,v
retrieving revision 1.726
retrieving revision 1.727
diff -u -r1.726 -r1.727
--- ChangeLog 8 Jul 2007 01:00:10 -0000 1.726
+++ ChangeLog 8 Jul 2007 13:11:48 -0000 1.727
@@ -1,3 +1,13 @@
+2007-07-08 Karl Berry <address@hidden>
+
+ * makeinfo/node.c (validate_file): don't check for warning limit,
+ it was hit in gnulib.
+ * makeinfo/makeinfo.h (reference_warning_limit): remove.
+ * makeinfo/makeinfo.c (main): ignore the option (but leave it in
+ so any Makefiles or scripts that use it won't gratuitiously break).
+ * doc/texinfo.txi (Invoking makeinfo): remove documentation for
+ --reference-limit.
+
2007-07-07 Karl Berry <address@hidden>
* doc/texinfo.txi (@copying): new Back-Cover Text.
Index: NEWS
===================================================================
RCS file: /sources/texinfo/texinfo/NEWS,v
retrieving revision 1.145
retrieving revision 1.146
diff -u -r1.145 -r1.146
--- NEWS 1 Jul 2007 18:44:36 -0000 1.145
+++ NEWS 8 Jul 2007 13:11:48 -0000 1.146
@@ -1,4 +1,4 @@
-$Id: NEWS,v 1.145 2007/07/01 18:44:36 karl Exp $
+$Id: NEWS,v 1.146 2007/07/08 13:11:48 karl Exp $
This NEWS file records noteworthy changes, very tersely.
See the manual for detailed information.
@@ -9,7 +9,6 @@
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
-
*** IMPORTANT NEWS FOR ALL AUTHORS OF TEXINFO MANUALS ***
As of version 4.2, Texinfo has a new command @copying to define the
@@ -47,6 +46,7 @@
. @allow-recursion (never documented) is deprecated and produces a warning.
. @quote-args (never documented) is now the default behavior.
. centering and such take account of character widths.
+ . the --reference-limit option is now a no-op.
. improvements to XML and Docbook output and the DTD.
* texi2dvi:
. pdftexi2dvi is a new wrapper to `texi2dvi --pdf', equal to texi2pdf,
Index: build-aux/config.guess
===================================================================
RCS file: /sources/texinfo/texinfo/build-aux/config.guess,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- build-aux/config.guess 18 Jun 2006 23:39:43 -0000 1.1
+++ build-aux/config.guess 8 Jul 2007 12:54:42 -0000 1.2
@@ -4,7 +4,7 @@
# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
# Inc.
-timestamp='2006-06-06'
+timestamp='2007-05-17'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -161,6 +161,7 @@
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
*) machine=${UNAME_MACHINE_ARCH}-unknown ;;
esac
# The Operating System including object format, if it has switched
@@ -211,7 +212,7 @@
echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
exit ;;
macppc:MirBSD:*:*)
- echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
exit ;;
*:MirBSD:*:*)
echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
@@ -329,7 +330,7 @@
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
- i86pc:SunOS:5.*:*)
+ i86pc:SunOS:5.*:* | ix86xen:SunOS:5.*:*)
echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
sun4*:SunOS:6*:*)
@@ -780,7 +781,7 @@
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
exit ;;
- i*:MINGW*:*)
+ *:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
exit ;;
i*:windows32*:*)
@@ -790,12 +791,15 @@
i*:PW*:*)
echo ${UNAME_MACHINE}-pc-pw32
exit ;;
- x86:Interix*:[345]*)
- echo i586-pc-interix${UNAME_RELEASE}
- exit ;;
- EM64T:Interix*:[345]*)
- echo x86_64-unknown-interix${UNAME_RELEASE}
- exit ;;
+ *:Interix*:[3456]*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ EM64T | authenticamd)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
[345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
echo i${UNAME_MACHINE}-pc-mks
exit ;;
@@ -950,6 +954,9 @@
x86_64:Linux:*:*)
echo x86_64-unknown-linux-gnu
exit ;;
+ xtensa:Linux:*:*)
+ echo xtensa-unknown-linux-gnu
+ exit ;;
i*86:Linux:*:*)
# The BFD linker knows what the default object file format is, so
# first see if it will tell us. cd to the root directory to prevent
@@ -1208,6 +1215,15 @@
SX-6:SUPER-UX:*:*)
echo sx6-nec-superux${UNAME_RELEASE}
exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
exit ;;
Index: build-aux/config.sub
===================================================================
RCS file: /sources/texinfo/texinfo/build-aux/config.sub,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- build-aux/config.sub 18 Jun 2006 23:39:43 -0000 1.1
+++ build-aux/config.sub 8 Jul 2007 12:54:42 -0000 1.2
@@ -4,7 +4,7 @@
# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
# Inc.
-timestamp='2006-06-06'
+timestamp='2007-06-28'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -245,12 +245,12 @@
| bfin \
| c4x | clipper \
| d10v | d30v | dlx | dsp16xx \
- | fr30 | frv \
+ | fido | fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
| m32c | m32r | m32rle | m68000 | m68k | m88k \
- | maxq | mb | microblaze | mcore \
+ | maxq | mb | microblaze | mcore | mep \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
@@ -276,6 +276,7 @@
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
+ | score \
| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle |
sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet |
sparclite \
@@ -284,7 +285,7 @@
| tahoe | thumb | tic4x | tic80 | tron \
| v850 | v850e \
| we32k \
- | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
| z8k)
basic_machine=$basic_machine-unknown
;;
@@ -323,7 +324,7 @@
| clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
| elxsi-* \
- | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| i*86-* | i860-* | i960-* | ia64-* \
@@ -367,7 +368,7 @@
| tron-* \
| v850-* | v850e-* | vax-* \
| we32k-* \
- | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
| xstormy16-* | xtensa-* \
| ymp-* \
| z8k-*)
@@ -474,8 +475,8 @@
basic_machine=craynv-cray
os=-unicosmp
;;
- cr16c)
- basic_machine=cr16c-unknown
+ cr16)
+ basic_machine=cr16-unknown
os=-elf
;;
crds | unos)
@@ -682,6 +683,10 @@
basic_machine=i386-pc
os=-mingw32
;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
miniframe)
basic_machine=m68000-convergent
;;
@@ -909,6 +914,10 @@
sb1el)
basic_machine=mipsisa64sb1el-unknown
;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
sei)
basic_machine=mips-sei
os=-seiux
@@ -920,6 +929,9 @@
basic_machine=sh-hitachi
os=-hms
;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
sh64)
basic_machine=sh64-unknown
;;
@@ -1214,7 +1226,7 @@
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos*)
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1366,6 +1378,9 @@
# system, and we'll never get to this point.
case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
spu-*)
os=-elf
;;
@@ -1406,6 +1421,9 @@
m68*-cisco)
os=-aout
;;
+ mep-*)
+ os=-elf
+ ;;
mips*-cisco)
os=-elf
;;
Index: build-aux/depcomp
===================================================================
RCS file: /sources/texinfo/texinfo/build-aux/depcomp,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- build-aux/depcomp 18 Jun 2006 23:39:43 -0000 1.1
+++ build-aux/depcomp 8 Jul 2007 12:54:42 -0000 1.2
@@ -1,14 +1,14 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2006-05-10.23
+scriptversion=2007-03-29.01
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
# Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
+# the Free Software Foundation; either version 3, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
@@ -92,7 +92,20 @@
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
- "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
stat=$?
if test $stat -eq 0; then :
else
@@ -202,34 +215,39 @@
# current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
- if test -f "$tmpdepfile"; then :
- else
- stripped=`echo "$stripped" | sed 's,^.*/,,'`
- tmpdepfile="$stripped.u"
- fi
-
if test $stat -eq 0; then :
else
- rm -f "$tmpdepfile"
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
if test -f "$tmpdepfile"; then
- outname="$stripped.o"
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
@@ -335,7 +353,7 @@
#
# With libtool 1.5 this exception was removed, and libtool now
# generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in in $dir.libs/$base.o.d and
+ # compilations output dependencies in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
Index: build-aux/install-sh
===================================================================
RCS file: /sources/texinfo/texinfo/build-aux/install-sh,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- build-aux/install-sh 18 Jun 2006 23:39:43 -0000 1.1
+++ build-aux/install-sh 8 Jul 2007 12:54:42 -0000 1.2
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2006-05-11.20
+scriptversion=2006-12-25.00
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,8 +39,7 @@
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
nl='
'
@@ -49,47 +48,59 @@
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
-posix_glob=
posix_mkdir=
-# Symbolic mode for testing mkdir with directories.
-# It is the same as 755, but also tests that "u+" works.
-test_mode=u=rwx,g=rx,o=rx,u+wx
-
# Desired mode of installed file.
mode=0755
-# Desired mode of newly created intermediate directories.
-# It is empty if not known yet.
-intermediate_mode=
-
+chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
-chgrpcmd=
-stripcmd=
+mvcmd=$mvprog
rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
src=
dst=
dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
no_target_directory=
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
@@ -99,59 +110,55 @@
In the 4th, create DIRECTORIES.
Options:
--c (ignored)
--d create directories instead of installing files.
--g GROUP $chgrpprog installed files to GROUP.
--m MODE $chmodprog installed files to MODE.
--o USER $chownprog installed files to USER.
--s $stripprog installed files.
--t DIRECTORY install into DIRECTORY.
--T report an error if DSTFILE is a directory.
---help display this help and exit.
---version display version info and exit.
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification
time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
- -c) shift
- continue;;
+ -c) ;;
- -d) dir_arg=true
- shift
- continue;;
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- shift
- shift
- continue;;
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t) dstarg=$2
- shift
- shift
- continue;;
-
- -T) no_target_directory=true
- shift
- continue;;
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t) dst_arg=$2
+ shift;;
+
+ -T) no_target_directory=true;;
--version) echo "$0 $scriptversion"; exit $?;;
@@ -163,21 +170,22 @@
*) break;;
esac
+ shift
done
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from
address@hidden
for arg
do
- if test -n "$dstarg"; then
+ if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
+ set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
- dstarg=$arg
+ dst_arg=$arg
done
fi
@@ -191,13 +199,38 @@
exit 0
fi
-test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
for src
do
# Protect names starting with `-'.
case $src in
- -*) src=./$src ;;
+ -*) src=./$src;;
esac
if test -n "$dir_arg"; then
@@ -215,22 +248,22 @@
exit 1
fi
- if test -z "$dstarg"; then
+ if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
- dst=$dstarg
+ dst=$dst_arg
# Protect names starting with `-'.
case $dst in
- -*) dst=./$dst ;;
+ -*) dst=./$dst;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
- echo "$0: $dstarg: Is a directory" >&2
+ echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
@@ -274,68 +307,96 @@
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- posix_mkdir=false
- if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then
- posix_mkdir=true
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null
- fi ;;
- esac
-
- if
- $posix_mkdir && {
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
# With -d, create the new directory with the user-specified mode.
- # Otherwise, create it using the same intermediate mode that
- # mkdir -p would use when creating intermediate directories.
- # POSIX says that this mode is "$(umask -S),u+wx", so use that
- # if umask -S works.
-
+ # Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
- mkdir_mode=$mode
+ mkdir_mode=-m$mode
else
- case $intermediate_mode in
- '')
- if umask_S=`(umask -S) 2>/dev/null`; then
- intermediate_mode=$umask_S,u+wx
- else
- intermediate_mode=$test_mode
- fi ;;
- esac
- mkdir_mode=$intermediate_mode
+ mkdir_mode=
fi
- $mkdirprog -m "$mkdir_mode" -p -- "$dstdir"
- }
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
then :
else
- # mkdir does not conform to POSIX, or it failed possibly due to
- # a race condition. Create the directory the slow way, step by
- # step, checking for races as we go.
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix=/ ;;
- -*) prefix=./ ;;
- *) prefix= ;;
+ /*) prefix='/';;
+ -*) prefix='./';;
+ *) prefix='';;
esac
- case $posix_glob in
- '')
- if (set -f) 2>/dev/null; then
- posix_glob=true
- else
- posix_glob=false
- fi ;;
- esac
+ eval "$initialize_posix_glob"
oIFS=$IFS
IFS=/
- $posix_glob && set -f
+ $posix_glob set -f
set fnord $dstdir
shift
- $posix_glob && set +f
+ $posix_glob set +f
IFS=$oIFS
prefixes=
@@ -349,7 +410,8 @@
prefixes=
else
if $posix_mkdir; then
- $mkdirprog -m "$mkdir_mode" -p -- "$dstdir" && break
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
@@ -365,7 +427,9 @@
if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently.
- eval "\$mkdirprog $prefixes" || test -d "$dstdir" || exit 1
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
fi
fi
@@ -375,7 +439,7 @@
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
@@ -386,7 +450,7 @@
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
- $doit $cpprog "$src" "$dsttmp" &&
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
@@ -394,41 +458,54 @@
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } &&
-
- # Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
- || {
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
-
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- if test -f "$dst"; then
- $doit $rmcmd -f "$dst" 2>/dev/null \
- || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
- && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
- || {
- echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- else
- :
- fi
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- } || exit 1
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
+
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
trap '' 0
fi
Index: build-aux/mdate-sh
===================================================================
RCS file: /sources/texinfo/texinfo/build-aux/mdate-sh,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- build-aux/mdate-sh 18 Jun 2006 23:39:43 -0000 1.1
+++ build-aux/mdate-sh 8 Jul 2007 12:54:42 -0000 1.2
@@ -1,15 +1,15 @@
#!/bin/sh
# Get modification time of a file or directory and pretty-print it.
-scriptversion=2005-06-29.22
+scriptversion=2007-03-30.02
-# Copyright (C) 1995, 1996, 1997, 2003, 2004, 2005 Free Software
+# Copyright (C) 1995, 1996, 1997, 2003, 2004, 2005, 2007 Free Software
# Foundation, Inc.
# written by Ulrich Drepper <address@hidden>, June 1995
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
+# the Free Software Foundation; either version 3, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
@@ -75,6 +75,10 @@
else
ls_command='ls -l -d'
fi
+# Avoid user/group names that might have spaces, when possible.
+if ls -n /dev/null 1>/dev/null 2>&1; then
+ ls_command="$ls_command -n"
+fi
# A `ls -l' line looks as follows on OS/2.
# drwxrwx--- 0 Aug 11 2001 foo
@@ -89,7 +93,7 @@
# words should be skipped to get the date.
# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
-set x`ls -l -d /`
+set x`$ls_command /`
# Find which argument is the month.
month=
Index: build-aux/missing
===================================================================
RCS file: /sources/texinfo/texinfo/build-aux/missing,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- build-aux/missing 18 Jun 2006 23:39:43 -0000 1.1
+++ build-aux/missing 8 Jul 2007 12:54:42 -0000 1.2
@@ -9,7 +9,7 @@
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
+# the Free Software Foundation; either version 3, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
Index: doc/texinfo.txi
===================================================================
RCS file: /sources/texinfo/texinfo/doc/texinfo.txi,v
retrieving revision 1.198
retrieving revision 1.199
diff -u -r1.198 -r1.199
--- doc/texinfo.txi 8 Jul 2007 01:00:10 -0000 1.198
+++ doc/texinfo.txi 8 Jul 2007 13:11:48 -0000 1.199
@@ -1,5 +1,5 @@
\input texinfo.tex @c -*-texinfo-*-
address@hidden $Id: texinfo.txi,v 1.198 2007/07/08 01:00:10 karl Exp $
address@hidden $Id: texinfo.txi,v 1.199 2007/07/08 13:11:48 karl Exp $
@c Ordinarily, Texinfo files have the extension .texi. But texinfo.texi
@c clashes with texinfo.tex on 8.3 filesystems, so we use texinfo.txi.
@@ -15467,15 +15467,6 @@
Indent each paragraph by @var{num} spaces.
@end table
address@hidden address@hidden
address@hidden -r @var{limit}
address@hidden address@hidden
address@hidden -r @var{limit}
-Set the value of the number of references to a node that
address@hidden will make without reporting a warning. If a node has more
-than this number of references in it, @code{makeinfo} will make the
-references but also report a warning. The default is 1000.
-
@item address@hidden
@opindex address@hidden
Keep Info files to at most @var{num} characters; default is 300,000.
@@ -18745,7 +18736,7 @@
(@url{http://www.gnu.org/software/rcs}) version control systems, which
expand it into a string such as:
@example
-$Id: texinfo.txi,v 1.198 2007/07/08 01:00:10 karl Exp $
+$Id: texinfo.txi,v 1.199 2007/07/08 13:11:48 karl Exp $
@end example
(This is useful in all sources that use version control, not just manuals.)
You may wish to include the @samp{$Id:} comment in the @code{@@copying}
@@ -18811,7 +18802,7 @@
@verbatim
\input texinfo @c -*-texinfo-*-
address@hidden $Id: texinfo.txi,v 1.198 2007/07/08 01:00:10 karl Exp $
address@hidden $Id: texinfo.txi,v 1.199 2007/07/08 13:11:48 karl Exp $
@comment %**start of header
@setfilename sample.info
@include version.texi
Index: makeinfo/makeinfo.c
===================================================================
RCS file: /sources/texinfo/texinfo/makeinfo/makeinfo.c,v
retrieving revision 1.102
retrieving revision 1.103
diff -u -r1.102 -r1.103
--- makeinfo/makeinfo.c 1 Jul 2007 21:20:32 -0000 1.102
+++ makeinfo/makeinfo.c 8 Jul 2007 13:11:48 -0000 1.103
@@ -1,5 +1,5 @@
/* makeinfo -- convert Texinfo source into other formats.
- $Id: makeinfo.c,v 1.102 2007/07/01 21:20:32 karl Exp $
+ $Id: makeinfo.c,v 1.103 2007/07/08 13:11:48 karl Exp $
Copyright (C) 1987, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
@@ -360,10 +360,9 @@
--help display this help and exit.\n\
--no-validate suppress node cross-reference validation.\n\
--no-warn suppress warnings (but not errors).\n\
- --reference-limit=NUM warn about at most NUM references (default
%d).\n\
-v, --verbose explain what is being done.\n\
--version display version information and exit.\n"),
- max_error_level, reference_warning_limit);
+ max_error_level);
puts ("");
/* xgettext: no-wrap */
@@ -739,14 +738,7 @@
prepend_to_include_path (optarg);
break;
- case 'r': /* --reference-limit */
- if (sscanf (optarg, "%d", &reference_warning_limit) != 1)
- {
- fprintf (stderr,
- _("%s: %s arg must be numeric, not `%s'.\n"),
- progname, "--reference-limit", optarg);
- usage (1);
- }
+ case 'r': /* was --reference-limit; obsolete, ignore */
break;
case 's': /* --footnote-style */
Index: makeinfo/makeinfo.h
===================================================================
RCS file: /sources/texinfo/texinfo/makeinfo/makeinfo.h,v
retrieving revision 1.27
retrieving revision 1.28
diff -u -r1.27 -r1.28
--- makeinfo/makeinfo.h 1 Jul 2007 21:20:33 -0000 1.27
+++ makeinfo/makeinfo.h 8 Jul 2007 13:11:48 -0000 1.28
@@ -1,5 +1,5 @@
/* makeinfo.h -- declarations for Makeinfo.
- $Id: makeinfo.h,v 1.27 2007/07/01 21:20:33 karl Exp $
+ $Id: makeinfo.h,v 1.28 2007/07/08 13:11:48 karl Exp $
Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005, 2006, 2007 Free Software Foundation, Inc.
@@ -223,10 +223,6 @@
/* Nonzero means that we process @xml and @ifxml. (--ifxml) */
DECLARE (int, process_xml, 0);
-/* Maximum number of references to a single node before complaining.
- (--reference-limit) */
-DECLARE (int, reference_warning_limit, 1000);
-
/* Default is to check node references. (--no-validate) */
DECLARE (int, validating, 1);
Index: makeinfo/node.c
===================================================================
RCS file: /sources/texinfo/texinfo/makeinfo/node.c,v
retrieving revision 1.36
retrieving revision 1.37
diff -u -r1.36 -r1.37
--- makeinfo/node.c 1 Jul 2007 21:20:33 -0000 1.36
+++ makeinfo/node.c 8 Jul 2007 13:11:48 -0000 1.37
@@ -1,5 +1,5 @@
/* node.c -- nodes for Texinfo.
- $Id: node.c,v 1.36 2007/07/01 21:20:33 karl Exp $
+ $Id: node.c,v 1.37 2007/07/08 13:11:48 karl Exp $
Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2007
Free Software Foundation, Inc.
@@ -1622,17 +1622,6 @@
continue;
}
- /* Special hack. If the node in question appears to have
- been referenced more than REFERENCE_WARNING_LIMIT times,
- give a warning. */
- if (tags->touched > reference_warning_limit)
- {
- input_filename = tags->filename;
- line_number = tags->line_no;
- warning (_("node `%s' has been referenced %d times"),
- tags->node, tags->touched);
- }
-
if (tags->touched == 0)
{
input_filename = tags->filename;
P ChangeLog
P NEWS
U build-aux/compile
P build-aux/config.guess
P build-aux/config.sub
P build-aux/depcomp
P build-aux/install-sh
P build-aux/mdate-sh
P build-aux/missing
P doc/texinfo.txi
P makeinfo/makeinfo.c
P makeinfo/makeinfo.h
P makeinfo/node.c
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- texinfo update (Sun Jul 8 09:23:01 EDT 2007),
Karl Berry <=