[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Slipstream-devel] Rider upper body roll and translation
From: |
Simon Fendall |
Subject: |
Re: [Slipstream-devel] Rider upper body roll and translation |
Date: |
Mon, 26 Dec 2011 09:11:07 +1300 |
Hi, again, Dimitris,
I have just had a decent play on today's CVS, and with the suggested
values there is still significant head-shaking going on. Mostly it is a
wheelie/gear change coming out of a bend that turns into a ridiculous
head-shake down a straight. I've got my rider yaw as 70nm/rad and
7nms/rad. I'm thinking I'll need to turn up that damping.
Attached is setup, session recording and a screenshot of the thing going
down again as I quit. I was on a really good run of it working properly,
too.
Resolution has been fine since.
This is a real long recording, with a huge off track excursion, so it'll
be a good test of the replay technology.
And I hope you had a great Christmas!
Si
On Sat, 2011-12-24 at 22:09 +0200, Dimitris Papavasiliou wrote:
> Hello,
>
> > I hope that you mean that the peak lateral force is at 0.025, or else
> > your steering torque cut off will be occurring before peak lateral
> > traction is reached.
>
> Uh yes, missed a zero there again. The correct number is indeed 0.025.
>
> Dimitris
Longreplay
Description: Text document
D6005.lua
Description: Text Data
Screenshot at 2011-12-26 09:04:23.png
Description: PNG image