[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Sks-devel] Question about apache2 configuration

From: Filip Stefaniak
Subject: Re: [Sks-devel] Question about apache2 configuration
Date: Tue, 12 Nov 2013 15:09:56 +0100
User-agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.1.0

W dniu 2013-11-12 14:12, Todd Lyons pisze:
> On Tue, Nov 12, 2013 at 09:42:13AM +0100, Filip Stefaniak wrote:
>> I've tried to configure sks server with apache2 as described at
>> But I had a problem. When sks was set to listen on port 11371, apache
>> complained about listening on the same port. So I have changed the sks
>> port to 11372 and configured Proxy to this port:
>> <VirtualHost *:80 *:11371>
> When apache complains about a VirtualHost declaration and things
> listening on the same port, it usually means there is an overlap in the
> name-based virtualhosts and the ip-based virtual hosts.  It depends if
> you interpreted the message correctly.  If it was complaining that
> another process already had the port open and apache couldn't open it,
> then the problem is that you have sks configured to listen on *:11371
> or instead of Alternativately, apache is
> complaining that multiple places in its own config tries to listen on
> port 11371.  The most important way to control this is to control it
> with the Listen statements.

Thanks Todd,
The problem was eventually solved. The main issue (among others) was
that the server is behind the router and has a *local ip* assigned,
while I tried to force apache to listen on *external ip* on 11371 (now
it is obious and silly, but sometimes it is really hard to find out such
tiny mistakes).

Your httpd configuration I found on this list helped me a lot with
setting up things.

Here I have another question: on the status page I'm not "Port 80"
positive, however my server has access on 80 port
( I see that you have green light there.
How to configure this?

best wishes,

Wysłane z mojego ZX Spectrum.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]