[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Savannah-users] Problem with SNMP Get Next command
From: |
Nikita Efimov |
Subject: |
[Savannah-users] Problem with SNMP Get Next command |
Date: |
Sat, 15 Mar 2008 12:29:41 +0300 |
I work with LWIP 1.3.0 + SNMP. At attempt to read through
mib-2.at.atTable.atEntry.atIfIndex with command GET NEXT the only first value
of ip-address table is read out constantly and the transition to following
value does not occur.
Mibble MIB Browser 0.28:
GET NEXT: 1.3.6.1.2.1.3.1.1.1.1.172.18.16.1: 1
GET NEXT: 1.3.6.1.2.1.3.1.1.1.1.172.18.16.1: 1
GET NEXT: 1.3.6.1.2.1.3.1.1.1.1.172.18.16.1: 1
GET NEXT: 1.3.6.1.2.1.3.1.1.1.1.172.18.16.1: 1
GET NEXT: 1.3.6.1.2.1.3.1.1.1.1.172.18.16.1: 1
.....
Other SNMP agent from the network printer answers in this case so:
GET NEXT: 1.3.6.1.2.1.3.1.1.1.1.1.172.18.16.1: 1
GET NEXT: 1.3.6.1.2.1.3.1.1.1.1.1.172.18.16.103: 1
GET NEXT: 1.3.6.1.2.1.3.1.1.2.1.1.172.18.16.1: 0x00:C0:F0:7B:E8:49
GET NEXT: 1.3.6.1.2.1.3.1.1.2.1.1.172.18.16.103: 0x00:10:DC:32:66:60
GET NEXT: 1.3.6.1.2.1.3.1.1.3.1.1.172.18.16.1: 172.18.16.1
GET NEXT: 1.3.6.1.2.1.3.1.1.3.1.1.172.18.16.103: 172.18.16.103
There are ideas, why?
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Savannah-users] Problem with SNMP Get Next command,
Nikita Efimov <=