[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Savannah-register-public] [task #4924] Submission of LabJack U12 Daemon
From: |
MichaelW |
Subject: |
[Savannah-register-public] [task #4924] Submission of LabJack U12 Daemon |
Date: |
Mon, 14 Nov 2005 15:54:13 +0000 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; rv:1.7.3) Gecko/20041020 Firefox/0.10.1 |
URL:
<http://savannah.gnu.org/task/?func=detailitem&item_id=4924>
Summary: Submission of LabJack U12 Daemon
Project: Savannah Administration
Submitted by: michaelw
Submitted on: Mon 11/14/05 at 15:54
Should Start On: Mon 11/14/05 at 00:00
Should be Finished on: Thu 11/24/05 at 00:00
Category: Project Approval
Priority: 5 - Normal
Status: None
Privacy: Public
Assigned to: None
Percent Complete: 0%
Open/Closed: Open
Effort: 0.00
_______________________________________________________
Details:
A new project has been registered at Savannah
The project account will remain inactive until a site admin approve or
discard the registration.
######### REGISTRATION ADMINISTRATION #########
While this item will be useful to track the registration process, approving
or discarding the registration must be done using the specific "Group
Administration" page, accessible only to site administrators, effectively
logged as site administrators (superuser):
<https://savannah.gnu.org/admin/groupedit.php?group_id=8118>
######### REGISTRATION DETAILS #########
Full Name:
----------
LabJack U12 Daemon
System Group Name:
-----------------
labjackd
Type:
-----
non-GNU software & documentation
License:
--------
GNU General Public License V2 or later
Description:
------------
Driving Daemon for the labjack U12, Input/Outuput Card
This daemon is an interface with the Labjack U12 electronic board. Its goal
is to read (every 50ms) each input of the electonic board. It also propose a
TCP/IP interface to access input information or to set output level. See the
Labjack informations to learn more about this input/output electronic board.
Actually, the labjack electronic board (under Linux) can communicate only by
a single process. Indeed this daemon goal is to be accessed by many process
or programs. It can also be accessed by a Telnet Interface.
The Daemon is based on a thread wich communicate with the Labjack, and read
an write inputs an outputs with a certain frequency. Another thread is
waiting for a connection on TCP/IP. As soon as the connection is etablished,
another thread is created to communicate with the client.
Other Software Required:
------------------------
LabJack U12 drivers for Linux
(http://www.labjack.com/files/linux-labjack.tar.gz)
The pthread library.
_______________________________________________________
Reply to this item at:
<http://savannah.gnu.org/task/?func=detailitem&item_id=4924>
_______________________________________________
Message sent via/by Savannah
http://savannah.gnu.org/
- [Savannah-register-public] [task #4924] Submission of LabJack U12 Daemon,
MichaelW <=
- [Savannah-register-public] [task #4924] Submission of LabJack U12 Daemon, Sebastian Wieseler, 2005/11/15
- [Savannah-register-public] [task #4924] Submission of LabJack U12 Daemon, Sebastian Wieseler, 2005/11/25
- [Savannah-register-public] [task #4924] Submission of LabJack U12 Daemon, MichaelW, 2005/11/28
- [Savannah-register-public] [task #4924] Submission of LabJack U12 Daemon, Sebastian Wieseler, 2005/11/28
- [Savannah-register-public] [task #4924] Submission of LabJack U12 Daemon, MichaelW, 2005/11/29
- [Savannah-register-public] [task #4924] Submission of LabJack U12 Daemon, Sebastian Wieseler, 2005/11/29
- [Savannah-register-public] [task #4924] Submission of LabJack U12 Daemon, MichaelW, 2005/11/30