qemu-trivial
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v2] edk2: Use TPM2_ENABLE and TPM2_CONFIG_ENABLE for newer edk2


From: Stefan Berger
Subject: [PATCH v2] edk2: Use TPM2_ENABLE and TPM2_CONFIG_ENABLE for newer edk2
Date: Wed, 8 Jun 2022 20:47:27 -0400

The edk2 commit 4de8d61bcec ("OvmfPkg: rework TPM configuration") switched
the x86_64 build from using TPM_ENABLE to TPM2_ENABLE and TPM1_ENABLE to
be similar to the ARM build. Adapt the QEMU edk2 Makefile to build with
TPM2_ENABLE. QEMU v7.0.0 had lost the TPM 2 support in edk2 and this
restores it.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
 roms/Makefile.edk2 | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/roms/Makefile.edk2 b/roms/Makefile.edk2
index 485f2244b1..a6eb14f215 100644
--- a/roms/Makefile.edk2
+++ b/roms/Makefile.edk2
@@ -101,8 +101,7 @@ submodules:
                -D NETWORK_IP6_ENABLE \
                -D NETWORK_HTTP_BOOT_ENABLE \
                -D NETWORK_TLS_ENABLE \
-               -D TPM_ENABLE \
-               -D TPM_CONFIG_ENABLE
+               -D TPM2_ENABLE
        cp edk2/Build/OvmfIa32/$(target)_$(call toolchain,i386)/FV/OVMF_CODE.fd 
$@
 
 ../pc-bios/edk2-i386-secure-code.fd: submodules
@@ -113,8 +112,7 @@ submodules:
                -D NETWORK_IP6_ENABLE \
                -D NETWORK_HTTP_BOOT_ENABLE \
                -D NETWORK_TLS_ENABLE \
-               -D TPM_ENABLE \
-               -D TPM_CONFIG_ENABLE \
+               -D TPM2_ENABLE \
                -D SECURE_BOOT_ENABLE \
                -D SMM_REQUIRE
        cp edk2/Build/OvmfIa32/$(target)_$(call toolchain,i386)/FV/OVMF_CODE.fd 
$@
@@ -127,8 +125,7 @@ submodules:
                -D NETWORK_IP6_ENABLE \
                -D NETWORK_HTTP_BOOT_ENABLE \
                -D NETWORK_TLS_ENABLE \
-               -D TPM_ENABLE \
-               -D TPM_CONFIG_ENABLE
+               -D TPM2_ENABLE
        cp edk2/Build/OvmfX64/$(target)_$(call 
toolchain,x86_64)/FV/OVMF_CODE.fd $@
 
 ../pc-bios/edk2-x86_64-secure-code.fd: submodules
@@ -140,8 +137,7 @@ submodules:
                -D NETWORK_IP6_ENABLE \
                -D NETWORK_HTTP_BOOT_ENABLE \
                -D NETWORK_TLS_ENABLE \
-               -D TPM_ENABLE \
-               -D TPM_CONFIG_ENABLE \
+               -D TPM2_ENABLE \
                -D SECURE_BOOT_ENABLE \
                -D SMM_REQUIRE
        cp edk2/Build/Ovmf3264/$(target)_$(call 
toolchain,x86_64)/FV/OVMF_CODE.fd $@
-- 
2.35.3




reply via email to

[Prev in Thread] Current Thread [Next in Thread]