qemu-trivial
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH 7/7] hw/scsi/scsi-disk: Replace magic '512' value by BDRV_SEC


From: Li Qiang
Subject: Re: [PATCH 7/7] hw/scsi/scsi-disk: Replace magic '512' value by BDRV_SECTOR_SIZE
Date: Sat, 15 Aug 2020 11:24:02 +0800

Philippe Mathieu-Daudé <f4bug@amsat.org> 于2020年8月14日周五 下午4:34写道:
>
> Use self-explicit definitions instead of magic '512' value.
>
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Reviewed-by: Li Qiang <liq3ea@gmail.com>

> ---
>  hw/scsi/scsi-disk.c | 44 +++++++++++++++++++++++---------------------
>  1 file changed, 23 insertions(+), 21 deletions(-)
>
> diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
> index 8ce68a9dd6..7612035a4e 100644
> --- a/hw/scsi/scsi-disk.c
> +++ b/hw/scsi/scsi-disk.c
> @@ -71,7 +71,7 @@ typedef struct SCSIDiskClass {
>
>  typedef struct SCSIDiskReq {
>      SCSIRequest req;
> -    /* Both sector and sector_count are in terms of qemu 512 byte blocks.  */
> +    /* Both sector and sector_count are in terms of BDRV_SECTOR_SIZE bytes.  
> */
>      uint64_t sector;
>      uint32_t sector_count;
>      uint32_t buflen;
> @@ -141,7 +141,7 @@ static void scsi_init_iovec(SCSIDiskReq *r, size_t size)
>          r->buflen = size;
>          r->iov.iov_base = blk_blockalign(s->qdev.conf.blk, r->buflen);
>      }
> -    r->iov.iov_len = MIN(r->sector_count * 512, r->buflen);
> +    r->iov.iov_len = MIN(r->sector_count * BDRV_SECTOR_SIZE, r->buflen);
>      qemu_iovec_init_external(&r->qiov, &r->iov, 1);
>  }
>
> @@ -311,7 +311,7 @@ static void scsi_read_complete_noio(SCSIDiskReq *r, int 
> ret)
>          goto done;
>      }
>
> -    n = r->qiov.size / 512;
> +    n = r->qiov.size / BDRV_SECTOR_SIZE;
>      r->sector += n;
>      r->sector_count -= n;
>      scsi_req_data(&r->req, r->qiov.size);
> @@ -505,7 +505,7 @@ static void scsi_write_complete_noio(SCSIDiskReq *r, int 
> ret)
>          goto done;
>      }
>
> -    n = r->qiov.size / 512;
> +    n = r->qiov.size / BDRV_SECTOR_SIZE;
>      r->sector += n;
>      r->sector_count -= n;
>      if (r->sector_count == 0) {
> @@ -1284,7 +1284,7 @@ static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, 
> uint8_t *outbuf)
>          } else { /* MODE_SENSE_10 */
>              outbuf[7] = 8; /* Block descriptor length  */
>          }
> -        nb_sectors /= (s->qdev.blocksize / 512);
> +        nb_sectors /= (s->qdev.blocksize / BDRV_SECTOR_SIZE);
>          if (nb_sectors > 0xffffff) {
>              nb_sectors = 0;
>          }
> @@ -1342,7 +1342,7 @@ static int scsi_disk_emulate_read_toc(SCSIRequest *req, 
> uint8_t *outbuf)
>      start_track = req->cmd.buf[6];
>      blk_get_geometry(s->qdev.conf.blk, &nb_sectors);
>      trace_scsi_disk_emulate_read_toc(start_track, format, msf >> 1);
> -    nb_sectors /= s->qdev.blocksize / 512;
> +    nb_sectors /= s->qdev.blocksize / BDRV_SECTOR_SIZE;
>      switch (format) {
>      case 0:
>          toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track);
> @@ -1738,9 +1738,10 @@ static void scsi_write_same_complete(void *opaque, int 
> ret)
>
>      block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct);
>
> -    data->nb_sectors -= data->iov.iov_len / 512;
> -    data->sector += data->iov.iov_len / 512;
> -    data->iov.iov_len = MIN(data->nb_sectors * 512, data->iov.iov_len);
> +    data->nb_sectors -= data->iov.iov_len / BDRV_SECTOR_SIZE;
> +    data->sector += data->iov.iov_len / BDRV_SECTOR_SIZE;
> +    data->iov.iov_len = MIN(data->nb_sectors * BDRV_SECTOR_SIZE,
> +                            data->iov.iov_len);
>      if (data->iov.iov_len) {
>          block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct,
>                           data->iov.iov_len, BLOCK_ACCT_WRITE);
> @@ -1805,9 +1806,10 @@ static void scsi_disk_emulate_write_same(SCSIDiskReq 
> *r, uint8_t *inbuf)
>
>      data = g_new0(WriteSameCBData, 1);
>      data->r = r;
> -    data->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
> -    data->nb_sectors = nb_sectors * (s->qdev.blocksize / 512);
> -    data->iov.iov_len = MIN(data->nb_sectors * 512, SCSI_WRITE_SAME_MAX);
> +    data->sector = r->req.cmd.lba * (s->qdev.blocksize / BDRV_SECTOR_SIZE);
> +    data->nb_sectors = nb_sectors * (s->qdev.blocksize / BDRV_SECTOR_SIZE);
> +    data->iov.iov_len = MIN(data->nb_sectors * BDRV_SECTOR_SIZE,
> +                            SCSI_WRITE_SAME_MAX);
>      data->iov.iov_base = buf = blk_blockalign(s->qdev.conf.blk,
>                                                data->iov.iov_len);
>      qemu_iovec_init_external(&data->qiov, &data->iov, 1);
> @@ -1980,7 +1982,7 @@ static int32_t scsi_disk_emulate_command(SCSIRequest 
> *req, uint8_t *buf)
>          if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) {
>              goto illegal_request;
>          }
> -        nb_sectors /= s->qdev.blocksize / 512;
> +        nb_sectors /= s->qdev.blocksize / BDRV_SECTOR_SIZE;
>          /* Returned value is the address of the last sector.  */
>          nb_sectors--;
>          /* Remember the new size for read/write sanity checking. */
> @@ -2049,7 +2051,7 @@ static int32_t scsi_disk_emulate_command(SCSIRequest 
> *req, uint8_t *buf)
>              if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) {
>                  goto illegal_request;
>              }
> -            nb_sectors /= s->qdev.blocksize / 512;
> +            nb_sectors /= s->qdev.blocksize / BDRV_SECTOR_SIZE;
>              /* Returned value is the address of the last sector.  */
>              nb_sectors--;
>              /* Remember the new size for read/write sanity checking. */
> @@ -2180,8 +2182,8 @@ static int32_t scsi_disk_dma_command(SCSIRequest *req, 
> uint8_t *buf)
>          if (!check_lba_range(s, r->req.cmd.lba, len)) {
>              goto illegal_lba;
>          }
> -        r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
> -        r->sector_count = len * (s->qdev.blocksize / 512);
> +        r->sector = r->req.cmd.lba * (s->qdev.blocksize / BDRV_SECTOR_SIZE);
> +        r->sector_count = len * (s->qdev.blocksize / BDRV_SECTOR_SIZE);
>          break;
>      case WRITE_6:
>      case WRITE_10:
> @@ -2211,8 +2213,8 @@ static int32_t scsi_disk_dma_command(SCSIRequest *req, 
> uint8_t *buf)
>          if (!check_lba_range(s, r->req.cmd.lba, len)) {
>              goto illegal_lba;
>          }
> -        r->sector = r->req.cmd.lba * (s->qdev.blocksize / 512);
> -        r->sector_count = len * (s->qdev.blocksize / 512);
> +        r->sector = r->req.cmd.lba * (s->qdev.blocksize / BDRV_SECTOR_SIZE);
> +        r->sector_count = len * (s->qdev.blocksize / BDRV_SECTOR_SIZE);
>          break;
>      default:
>          abort();
> @@ -2229,9 +2231,9 @@ static int32_t scsi_disk_dma_command(SCSIRequest *req, 
> uint8_t *buf)
>      }
>      assert(r->iov.iov_len == 0);
>      if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
> -        return -r->sector_count * 512;
> +        return -r->sector_count * BDRV_SECTOR_SIZE;
>      } else {
> -        return r->sector_count * 512;
> +        return r->sector_count * BDRV_SECTOR_SIZE;
>      }
>  }
>
> @@ -2243,7 +2245,7 @@ static void scsi_disk_reset(DeviceState *dev)
>      scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET));
>
>      blk_get_geometry(s->qdev.conf.blk, &nb_sectors);
> -    nb_sectors /= s->qdev.blocksize / 512;
> +    nb_sectors /= s->qdev.blocksize / BDRV_SECTOR_SIZE;
>      if (nb_sectors) {
>          nb_sectors--;
>      }
> --
> 2.21.3
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]