qemu-trivial
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-trivial] [PATCH v2 04/14] hw/dma/omap_dma: Use qemu_log_mask(GUEST


From: Philippe Mathieu-Daudé
Subject: [Qemu-trivial] [PATCH v2 04/14] hw/dma/omap_dma: Use qemu_log_mask(GUEST_ERROR) instead of fprintf
Date: Fri, 22 Jun 2018 10:40:26 -0300

Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
---
 hw/dma/omap_dma.c | 64 +++++++++++++++++++++++++++++------------------
 1 file changed, 40 insertions(+), 24 deletions(-)

diff --git a/hw/dma/omap_dma.c b/hw/dma/omap_dma.c
index ab3a1b0451..cbb920f31d 100644
--- a/hw/dma/omap_dma.c
+++ b/hw/dma/omap_dma.c
@@ -879,15 +879,18 @@ static int omap_dma_ch_reg_write(struct omap_dma_s *s,
         ch->burst[0] = (value & 0x0180) >> 7;
         ch->pack[0] = (value & 0x0040) >> 6;
         ch->port[0] = (enum omap_dma_port) ((value & 0x003c) >> 2);
-        if (ch->port[0] >= __omap_dma_port_last)
-            printf("%s: invalid DMA port %i\n", __func__,
-                            ch->port[0]);
-        if (ch->port[1] >= __omap_dma_port_last)
-            printf("%s: invalid DMA port %i\n", __func__,
-                            ch->port[1]);
+        if (ch->port[0] >= __omap_dma_port_last) {
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid DMA port %i\n",
+                          __func__, ch->port[0]);
+        }
+        if (ch->port[1] >= __omap_dma_port_last) {
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid DMA port %i\n",
+                          __func__, ch->port[1]);
+        }
         ch->data_type = 1 << (value & 3);
         if ((value & 3) == 3) {
-            printf("%s: bad data_type for DMA channel\n", __func__);
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "%s: bad data_type for DMA channel\n", __func__);
             ch->data_type >>= 1;
         }
         break;
@@ -1899,14 +1902,18 @@ static void omap_dma4_write(void *opaque, hwaddr addr,
         if (value & 2)                                         /* SOFTRESET */
             omap_dma_reset(s->dma);
         s->ocp = value & 0x3321;
-        if (((s->ocp >> 12) & 3) == 3)                         /* MIDLEMODE */
-            fprintf(stderr, "%s: invalid DMA power mode\n", __func__);
+        if (((s->ocp >> 12) & 3) == 3) { /* MIDLEMODE */
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid DMA power mode\n",
+                          __func__);
+        }
         return;
 
     case 0x78: /* DMA4_GCR */
         s->gcr = value & 0x00ff00ff;
-       if ((value & 0xff) == 0x00)             /* MAX_CHANNEL_FIFO_DEPTH */
-            fprintf(stderr, "%s: wrong FIFO depth in GCR\n", __func__);
+        if ((value & 0xff) == 0x00) { /* MAX_CHANNEL_FIFO_DEPTH */
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: wrong FIFO depth in GCR\n",
+                          __func__);
+        }
         return;
 
     case 0x80 ... 0xfff:
@@ -1935,9 +1942,11 @@ static void omap_dma4_write(void *opaque, hwaddr addr,
     case 0x00: /* DMA4_CCR */
         ch->buf_disable = (value >> 25) & 1;
         ch->src_sync = (value >> 24) & 1;      /* XXX For CamDMA must be 1 */
-        if (ch->buf_disable && !ch->src_sync)
-            fprintf(stderr, "%s: Buffering disable is not allowed in "
-                            "destination synchronised mode\n", __func__);
+        if (ch->buf_disable && !ch->src_sync) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "%s: Buffering disable is not allowed in "
+                          "destination synchronised mode\n", __func__);
+        }
         ch->prefetch = (value >> 23) & 1;
         ch->bs = (value >> 18) & 1;
         ch->transparent_copy = (value >> 17) & 1;
@@ -1947,9 +1956,11 @@ static void omap_dma4_write(void *opaque, hwaddr addr,
         ch->suspend = (value & 0x0100) >> 8;
         ch->priority = (value & 0x0040) >> 6;
         ch->fs = (value & 0x0020) >> 5;
-        if (ch->fs && ch->bs && ch->mode[0] && ch->mode[1])
-            fprintf(stderr, "%s: For a packet transfer at least one port "
-                            "must be constant-addressed\n", __func__);
+        if (ch->fs && ch->bs && ch->mode[0] && ch->mode[1]) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "%s: For a packet transfer at least one port "
+                          "must be constant-addressed\n", __func__);
+        }
         ch->sync = (value & 0x001f) | ((value >> 14) & 0x0060);
         /* XXX must be 0x01 for CamDMA */
 
@@ -1978,9 +1989,11 @@ static void omap_dma4_write(void *opaque, hwaddr addr,
         ch->endian_lock[0] =(value >> 20) & 1;
         ch->endian[1] =(value >> 19) & 1;
         ch->endian_lock[1] =(value >> 18) & 1;
-        if (ch->endian[0] != ch->endian[1])
-            fprintf(stderr, "%s: DMA endianness conversion enable attempt\n",
-                            __func__);
+        if (ch->endian[0] != ch->endian[1]) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "%s: DMA endianness conversion enable attempt\n",
+                          __func__);
+        }
         ch->write_mode = (value >> 16) & 3;
         ch->burst[1] = (value & 0xc000) >> 14;
         ch->pack[1] = (value & 0x2000) >> 13;
@@ -1988,12 +2001,15 @@ static void omap_dma4_write(void *opaque, hwaddr addr,
         ch->burst[0] = (value & 0x0180) >> 7;
         ch->pack[0] = (value & 0x0040) >> 6;
         ch->translate[0] = (value & 0x003c) >> 2;
-        if (ch->translate[0] | ch->translate[1])
-            fprintf(stderr, "%s: bad MReqAddressTranslate sideband signal\n",
-                            __func__);
+        if (ch->translate[0] | ch->translate[1]) {
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "%s: bad MReqAddressTranslate sideband signal\n",
+                          __func__);
+        }
         ch->data_type = 1 << (value & 3);
         if ((value & 3) == 3) {
-            printf("%s: bad data_type for DMA channel\n", __func__);
+            qemu_log_mask(LOG_GUEST_ERROR,
+                          "%s: bad data_type for DMA channel\n", __func__);
             ch->data_type >>= 1;
         }
         break;
-- 
2.18.0.rc2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]