[Qemu-trivial] [PATCH 2/2] qemu-options: Use @itemx where appropriate

[Markus Armbruster]

Doesn't appear to make a difference, but let's use it consistently.

Signed-off-by: Markus Armbruster <address@hidden>
---
 qemu-options.hx | 52 ++++++++++++++++++++++++++--------------------------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/qemu-options.hx b/qemu-options.hx
index b7afec5..d32f8bf 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -118,7 +118,7 @@ DEF("numa", HAS_ARG, QEMU_OPTION_numa,
     "-numa node[,memdev=id][,cpus=cpu[-cpu]][,nodeid=node]\n", QEMU_ARCH_ALL)
 STEXI
 @item -numa node[,address@hidden,address@hidden,address@hidden
address@hidden -numa node[,address@hidden,address@hidden,address@hidden
address@hidden -numa node[,address@hidden,address@hidden,address@hidden
 @findex -numa
 Simulate a multi node NUMA system. If @samp{mem}, @samp{memdev}
 and @samp{cpus} are omitted, resources are split equally. Also, note
@@ -421,7 +421,7 @@ DEF("fda", HAS_ARG, QEMU_OPTION_fda,
 DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL)
 STEXI
 @item -fda @var{file}
address@hidden -fdb @var{file}
address@hidden -fdb @var{file}
 @findex -fda
 @findex -fdb
 Use @var{file} as floppy disk 0/1 image (@pxref{disk_images}).
@@ -435,9 +435,9 @@ DEF("hdc", HAS_ARG, QEMU_OPTION_hdc,
 DEF("hdd", HAS_ARG, QEMU_OPTION_hdd, "", QEMU_ARCH_ALL)
 STEXI
 @item -hda @var{file}
address@hidden -hdb @var{file}
address@hidden -hdc @var{file}
address@hidden -hdd @var{file}
address@hidden -hdb @var{file}
address@hidden -hdc @var{file}
address@hidden -hdd @var{file}
 @findex -hda
 @findex -hdb
 @findex -hdc
@@ -1008,8 +1008,8 @@ Set the TCP port spice is listening on for plaintext 
channels.
 Set the IP address spice is listening on.  Default is any address.
 
 @item ipv4
address@hidden ipv6
address@hidden unix
address@hidden ipv6
address@hidden unix
 Force using the specified IP version.
 
 @item password=<secret>
@@ -1044,17 +1044,17 @@ Set the TCP port spice is listening on for encrypted 
channels.
 Set the x509 file directory. Expects same filenames as -vnc $display,x509=$dir
 
 @item x509-key-file=<file>
address@hidden x509-key-password=<file>
address@hidden x509-cert-file=<file>
address@hidden x509-cacert-file=<file>
address@hidden x509-dh-key-file=<file>
address@hidden x509-key-password=<file>
address@hidden x509-cert-file=<file>
address@hidden x509-cacert-file=<file>
address@hidden x509-dh-key-file=<file>
 The x509 file names can also be configured individually.
 
 @item tls-ciphers=<list>
 Specify which ciphers to use.
 
 @item tls-channel=[main|display|cursor|inputs|record|playback]
address@hidden plaintext-channel=[main|display|cursor|inputs|record|playback]
address@hidden plaintext-channel=[main|display|cursor|inputs|record|playback]
 Force specific channel to be used with or without TLS encryption.  The
 options can be specified multiple times to configure multiple
 channels.  The special name "default" can be used to set the default
@@ -1066,7 +1066,7 @@ Configure image compression (lossless).
 Default is auto_glz.
 
 @item jpeg-wan-compression=[auto|never|always]
address@hidden zlib-glz-wan-compression=[auto|never|always]
address@hidden zlib-glz-wan-compression=[auto|never|always]
 Configure wan image compression (lossy for slow links).
 Default is auto.
 
@@ -1602,7 +1602,7 @@ privilege to run. Valid options are:
 Connect user mode stack to VLAN @var{n} (@var{n} = 0 is the default).
 
 @item address@hidden
address@hidden address@hidden
address@hidden address@hidden
 Assign symbolic name for use in monitor commands.
 
 @item address@hidden/@var{mask}]
@@ -1709,7 +1709,7 @@ Then when you use on the host @code{telnet localhost 
5555}, you
 connect to the guest telnet server.
 
 @item guestfwd=[tcp]:@var{server}:@address@hidden
address@hidden guestfwd=[tcp]:@var{server}:@address@hidden:command}
address@hidden guestfwd=[tcp]:@var{server}:@address@hidden:command}
 Forward guest TCP connections to the IP address @var{server} on port @var{port}
 to the character device @var{dev} or to a program executed by @var{cmd:command}
 which gets spawned for each connection. This option can be given multiple 
times.
@@ -1740,7 +1740,7 @@ syntax gives undefined results. Their use for new 
applications is discouraged
 as they will be removed from future versions.
 
 @item -netdev 
tap,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden
address@hidden -net 
tap[,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden
address@hidden -net 
tap[,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden
 Connect the host TAP network interface @var{name} to VLAN @var{n}.
 
 Use the network script @var{file} to configure it and the network script
@@ -1780,7 +1780,7 @@ qemu-system-i386 linux.img \
 @end example
 
 @item -netdev bridge,address@hidden,address@hidden,address@hidden
address@hidden -net 
bridge[,address@hidden,address@hidden,address@hidden,address@hidden
address@hidden -net 
bridge[,address@hidden,address@hidden,address@hidden,address@hidden
 Connect a host TAP network interface to a host bridge device.
 
 Use the network helper @var{helper} to configure the TAP interface and
@@ -1803,7 +1803,7 @@ qemu-system-i386 linux.img -net bridge,br=qemubr0 -net 
nic,model=virtio
 @end example
 
 @item -netdev 
socket,address@hidden,address@hidden,address@hidden:@var{port}][,address@hidden:@var{port}]
address@hidden -net socket[,address@hidden,address@hidden,address@hidden 
[,address@hidden:@var{port}][,address@hidden:@var{port}]
address@hidden -net socket[,address@hidden,address@hidden,address@hidden 
[,address@hidden:@var{port}][,address@hidden:@var{port}]
 
 Connect the VLAN @var{n} to a remote VLAN in another QEMU virtual
 machine using a TCP socket connection. If @option{listen} is
@@ -1826,7 +1826,7 @@ qemu-system-i386 linux.img \
 @end example
 
 @item -netdev 
socket,address@hidden,address@hidden,address@hidden:@var{port}[,address@hidden
address@hidden -net 
socket[,address@hidden,address@hidden,address@hidden,address@hidden:@var{port}[,address@hidden
address@hidden -net 
socket[,address@hidden,address@hidden,address@hidden,address@hidden:@var{port}[,address@hidden
 
 Create a VLAN @var{n} shared with another QEMU virtual
 machines using a UDP multicast socket, effectively making a bus for
@@ -1878,7 +1878,7 @@ qemu-system-i386 linux.img \
 @end example
 
 @item -netdev 
l2tpv3,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,ipv6][,udp][,cookie64][,counter][,pincounter][,address@hidden,address@hidden,address@hidden
address@hidden -net 
l2tpv3[,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,ipv6][,udp][,cookie64][,counter][,pincounter][,address@hidden,address@hidden,address@hidden
address@hidden -net 
l2tpv3[,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,ipv6][,udp][,cookie64][,counter][,pincounter][,address@hidden,address@hidden,address@hidden
 Connect VLAN @var{n} to L2TPv3 pseudowire. L2TPv3 (RFC3391) is a popular
 protocol to transport Ethernet (and other Layer 2) data frames between
 two systems. It is present in routers, firewalls and the Linux kernel
@@ -1899,7 +1899,7 @@ This transport allows a VM to communicate to another VM, 
router or firewall dire
 @item ipv6
     force v6, otherwise defaults to v4.
 @item address@hidden
address@hidden address@hidden
address@hidden address@hidden
     Cookies are a weak form of security in the l2tpv3 specification.
 Their function is mostly to prevent misconfiguration. By default they are 32
 bit.
@@ -1937,7 +1937,7 @@ qemu-system-i386 linux.img -net nic -net 
l2tpv3,src=4.2.3.1,dst=1.2.3.4,udp,srcp
 @end example
 
 @item -netdev 
vde,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden
address@hidden -net vde[,address@hidden,address@hidden,address@hidden 
[,address@hidden,address@hidden,address@hidden
address@hidden -net vde[,address@hidden,address@hidden,address@hidden 
[,address@hidden,address@hidden,address@hidden
 Connect VLAN @var{n} to PORT @var{n} of a vde switch running on host and
 listening for incoming connections on @var{socketpath}. Use GROUP 
@var{groupname}
 and MODE @var{octalmode} to change default ownership and permissions for
@@ -2236,7 +2236,7 @@ DragonFlyBSD hosts.  It is an alias for @option{serial}.
 @option{path} specifies the path to the tty. @option{path} is required.
 
 @item -chardev parallel ,address@hidden ,address@hidden
address@hidden -chardev parport ,address@hidden ,address@hidden
address@hidden -chardev parport ,address@hidden ,address@hidden
 
 @option{parallel} is only available on Linux, FreeBSD and DragonFlyBSD hosts.
 
@@ -3201,7 +3201,7 @@ Examples:
 
 @table @code
 @item -watchdog i6300esb -watchdog-action pause
address@hidden -watchdog ib700
address@hidden -watchdog ib700
 @end table
 ETEXI
 
@@ -3221,7 +3221,7 @@ instance you could use the either of the following to 
change the escape
 character to Control-t.
 @table @code
 @item -echr 0x14
address@hidden -echr 20
address@hidden -echr 20
 @end table
 ETEXI
 
@@ -3269,7 +3269,7 @@ DEF("incoming", HAS_ARG, QEMU_OPTION_incoming, \
     QEMU_ARCH_ALL)
 STEXI
 @item -incoming tcp:address@hidden:@var{port}[,address@hidden,ipv4][,ipv6]
address@hidden -incoming rdma:@var{host}:@var{port}[,ipv4][,ipv6]
address@hidden -incoming rdma:@var{host}:@var{port}[,ipv4][,ipv6]
 @findex -incoming
 Prepare for incoming migration, listen on a given tcp port.
 
-- 
1.9.3