[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-stable] [Qemu-devel] [PATCH] virtio-pci: enable bus master for
From: |
Greg Kurz |
Subject: |
Re: [Qemu-stable] [Qemu-devel] [PATCH] virtio-pci: enable bus master for old guests |
Date: |
Wed, 10 Sep 2014 11:01:48 +0200 |
On Wed, 10 Sep 2014 12:32:30 +0300
"Michael S. Tsirkin" <address@hidden> wrote:
> On Wed, Sep 10, 2014 at 01:44:49PM +0530, Nikunj A Dadhania wrote:
> > Greg Kurz <address@hidden> writes:
> >
> > > On Mon, 8 Sep 2014 19:05:02 +0300
> > > "Michael S. Tsirkin" <address@hidden> wrote:
> > >
> > >> commit cc943c36faa192cd4b32af8fe5edb31894017d35
> > >> pci: Use bus master address space for delivering MSI/MSI-X messages
> > >> breaks virtio-net for rhel6.[56] x86 guests because they don't
> > >> enable bus mastering for virtio PCI devices
> > >>
> > >> Old guests forgot to enable bus mastering, enable it
> > >> automatically on DRIVER_OK.
> > >>
> > >> Note: we should either back out the original patch from
> > >> stable or apply this one on top.
> > >>
> > >> Cc: address@hidden
> > >> Reported-by: Greg Kurz <address@hidden>
> > >> Signed-off-by: Jan Kiszka <address@hidden>
> > >> Signed-off-by: Michael S. Tsirkin <address@hidden>
> > >> ---
> > >> hw/virtio/virtio-pci.c | 2 ++
> > >> 1 file changed, 2 insertions(+)
> > >>
> > >> diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
> > >> index ddb5da1..af937d2 100644
> > >> --- a/hw/virtio/virtio-pci.c
> > >> +++ b/hw/virtio/virtio-pci.c
> > >> @@ -320,6 +320,8 @@ static void virtio_ioport_write(void *opaque,
> > >> uint32_t addr, uint32_t val)
> > >> if ((val & VIRTIO_CONFIG_S_DRIVER_OK) &&
> > >> !(proxy->pci_dev.config[PCI_COMMAND] & PCI_COMMAND_MASTER))
> > >> {
> > >> proxy->flags |= VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
> > >> +
> > >> memory_region_set_enabled(&proxy->pci_dev.bus_master_enable_region,
> > >> + true);
> > >> }
> > >> break;
> > >> case VIRTIO_MSI_CONFIG_VECTOR:
> > >
> > > Cc'ing Alexey for some SLOF and early boot of the ppc64 kernel expertise.
> > >
> > > Michael,
> > >
> > > This was enough to fix virtio-net in the rhel6.5 x86 guest case.
> > > Unfortunately,
> > > this fails for rhel6.5 ppc64 because it is never called...
> >
> > > I did some debugging: it looks like the guest kernel calls the OF
> > > quisece call to flush pending DMA and disables bus master on the
> > > virtio-blk device (PCI_COMMAND == 0x3).
> >
> > Getting confused, above you are talking about virtio-net and here it is
> > virtio-blk.
> >
> > Anyways, the routines still remains same for both of them. From SLOF
> > during init we set DRIVER_OK, and after using the device during the
> > quiesce, called from linux kernel VIRTIO_CONFIG_S_FAILED is set and then
> > a VIRTIO_DEVICE_RESET is done.
>
> BTW, you really should start enabling bus mastering, avoid relying
> on the work-around we have for broken guests.
>
FWIW during my debug session, I see that SLOF enables bus mastering...
unfortunately, it gets disabled at some point after the guest kernel
is started (around the ppc64 prom_init() call).
> > > The guest then continues to boot and hangs... It appears that waiting
> > > for the guest to issue VIRTIO_CONFIG_S_DRIVER_OK is not enough. Since
> > > we need this for MSI to work, I tried the following and it fixes the
> > > issue:
> > >
> > > diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
> > > index af937d2..3d72aa8 100644
> > > --- a/hw/virtio/virtio-pci.c
> > > +++ b/hw/virtio/virtio-pci.c
> > > @@ -111,9 +111,14 @@ static void virtio_pci_notify(DeviceState *d,
> > > uint16_t vector)
> > > {
> > > VirtIOPCIProxy *proxy = to_virtio_pci_proxy_fast(d);
> > >
> > > - if (msix_enabled(&proxy->pci_dev))
> > > + if (msix_enabled(&proxy->pci_dev)) {
> > > + if (!(proxy->pci_dev.config[PCI_COMMAND] & PCI_COMMAND_MASTER)) {
> > > + proxy->flags |= VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
> > > +
> > > memory_region_set_enabled(&proxy->pci_dev.bus_master_enable_region,
> > > + true);
> > > + }
> > > msix_notify(&proxy->pci_dev, vector);
> > > - else {
> > > + } else {
> > > VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
> > > pci_set_irq(&proxy->pci_dev, vdev->isr & 1);
> > > }
> > >
> > > If this is acceptable, I'll make it a helper and squash it into your
> > > patch.
> > >
> > > Thoughts ?
> > >
> > > --
> > > Gregory Kurz address@hidden
> > > address@hidden
> > > Software Engineer @ IBM/Meiosys http://www.ibm.com
> > > Tel +33 (0)562 165 496
> > >
> > > "Anarchy is about taking complete responsibility for yourself."
> > > Alan Moore.
>
--
Gregory Kurz address@hidden
address@hidden
Software Engineer @ IBM/Meiosys http://www.ibm.com
Tel +33 (0)562 165 496
"Anarchy is about taking complete responsibility for yourself."
Alan Moore.
Re: [Qemu-stable] [PATCH] virtio-pci: enable bus master for old guests, Michael S. Tsirkin, 2014/09/10