[Qemu-stable] [PATCH 2/2] scsi-disk: fix VERIFY emulation

[Paolo Bonzini]

VERIFY emulation was completely botched (and remained botched through
all the refactorings).  The command must be emulated both in check-medium
mode (BYTCHK=00, which we implement by doing nothing) and in check-bytes
mode (which we do not implement yet).  Unlike WRITE AND VERIFY (which we
treat simply as WRITE with FUA bit set), VERIFY cannot be handled like
READ.  In fact the device is _receiving_ data for VERIFY, not _sending_
it like READ.

Cc: address@hidden
Signed-off-by: Paolo Bonzini <address@hidden>
---
 hw/scsi/scsi-disk.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index 74e6a14..1fd1c26 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -1597,6 +1597,14 @@ static void scsi_disk_emulate_write_data(SCSIRequest 
*req)
         scsi_disk_emulate_unmap(r, r->iov.iov_base);
         break;
 
+    case VERIFY_10:
+    case VERIFY_12:
+    case VERIFY_16:
+        if (r->req.status == -1) {
+            scsi_check_condition(r, SENSE_CODE(INVALID_FIELD));
+        }
+        break;
+
     default:
         abort();
     }
@@ -1837,6 +1845,14 @@ static int32_t scsi_disk_emulate_command(SCSIRequest 
*req, uint8_t *buf)
     case UNMAP:
         DPRINTF("Unmap (len %lu)\n", (long)r->req.cmd.xfer);
         break;
+    case VERIFY_10:
+    case VERIFY_12:
+    case VERIFY_16:
+        DPRINTF("Verify (bytchk %lu)\n", (r->req.buf[1] >> 1) & 3);
+        if (req->cmd.buf[1] & 6) {
+            goto illegal_request;
+        }
+        break;
     case WRITE_SAME_10:
     case WRITE_SAME_16:
         nb_sectors = scsi_data_cdb_length(r->req.cmd.buf);
@@ -1936,10 +1952,6 @@ static int32_t scsi_disk_dma_command(SCSIRequest *req, 
uint8_t *buf)
             scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED));
             return 0;
         }
-        /* fallthrough */
-    case VERIFY_10:
-    case VERIFY_12:
-    case VERIFY_16:
         DPRINTF("Write %s(sector %" PRId64 ", count %u)\n",
                 (command & 0xe) == 0xe ? "And Verify " : "",
                 r->req.cmd.lba, len);
@@ -2207,14 +2219,14 @@ static const SCSIReqOps *const 
scsi_disk_reqops_dispatch[256] = {
     [UNMAP]                           = &scsi_disk_emulate_reqops,
     [WRITE_SAME_10]                   = &scsi_disk_emulate_reqops,
     [WRITE_SAME_16]                   = &scsi_disk_emulate_reqops,
+    [VERIFY_10]                       = &scsi_disk_emulate_reqops,
+    [VERIFY_12]                       = &scsi_disk_emulate_reqops,
+    [VERIFY_16]                       = &scsi_disk_emulate_reqops,
 
     [READ_6]                          = &scsi_disk_dma_reqops,
     [READ_10]                         = &scsi_disk_dma_reqops,
     [READ_12]                         = &scsi_disk_dma_reqops,
     [READ_16]                         = &scsi_disk_dma_reqops,
-    [VERIFY_10]                       = &scsi_disk_dma_reqops,
-    [VERIFY_12]                       = &scsi_disk_dma_reqops,
-    [VERIFY_16]                       = &scsi_disk_dma_reqops,
     [WRITE_6]                         = &scsi_disk_dma_reqops,
     [WRITE_10]                        = &scsi_disk_dma_reqops,
     [WRITE_12]                        = &scsi_disk_dma_reqops,
-- 
1.8.4.2