qemu-s390x
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v10 01/16] s390x: Move diagnose 308 subcodes and rcs into ipl


From: Claudio Imbrenda
Subject: Re: [PATCH v10 01/16] s390x: Move diagnose 308 subcodes and rcs into ipl.h
Date: Thu, 19 Mar 2020 13:42:33 +0100

On Wed, 18 Mar 2020 10:30:32 -0400
Janosch Frank <address@hidden> wrote:

> They are part of the IPL process, so let's put them into the ipl
> header.
> 
> Signed-off-by: Janosch Frank <address@hidden>


Reviewed-by: Claudio Imbrenda <address@hidden>


> ---
>  hw/s390x/ipl.h      | 11 +++++++++++
>  target/s390x/diag.c | 11 -----------
>  2 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/hw/s390x/ipl.h b/hw/s390x/ipl.h
> index 3e44abe1c651d8a0..a5665e6bfde2e8cf 100644
> --- a/hw/s390x/ipl.h
> +++ b/hw/s390x/ipl.h
> @@ -159,6 +159,17 @@ struct S390IPLState {
>  typedef struct S390IPLState S390IPLState;
>  QEMU_BUILD_BUG_MSG(offsetof(S390IPLState, iplb) & 3, "alignment of
> iplb wrong"); 
> +#define DIAG_308_RC_OK              0x0001
> +#define DIAG_308_RC_NO_CONF         0x0102
> +#define DIAG_308_RC_INVALID         0x0402
> +
> +#define DIAG308_RESET_MOD_CLR       0
> +#define DIAG308_RESET_LOAD_NORM     1
> +#define DIAG308_LOAD_CLEAR          3
> +#define DIAG308_LOAD_NORMAL_DUMP    4
> +#define DIAG308_SET                 5
> +#define DIAG308_STORE               6
> +
>  #define S390_IPL_TYPE_FCP 0x00
>  #define S390_IPL_TYPE_CCW 0x02
>  #define S390_IPL_TYPE_QEMU_SCSI 0xff
> diff --git a/target/s390x/diag.c b/target/s390x/diag.c
> index 54e5670b3fd6d960..8aba6341f94848e1 100644
> --- a/target/s390x/diag.c
> +++ b/target/s390x/diag.c
> @@ -49,17 +49,6 @@ int handle_diag_288(CPUS390XState *env, uint64_t
> r1, uint64_t r3) return diag288_class->handle_timer(diag288, func,
> timeout); }
>  
> -#define DIAG_308_RC_OK              0x0001
> -#define DIAG_308_RC_NO_CONF         0x0102
> -#define DIAG_308_RC_INVALID         0x0402
> -
> -#define DIAG308_RESET_MOD_CLR       0
> -#define DIAG308_RESET_LOAD_NORM     1
> -#define DIAG308_LOAD_CLEAR          3
> -#define DIAG308_LOAD_NORMAL_DUMP    4
> -#define DIAG308_SET                 5
> -#define DIAG308_STORE               6
> -
>  static int diag308_parm_check(CPUS390XState *env, uint64_t r1,
> uint64_t addr, uintptr_t ra, bool write)
>  {




reply via email to

[Prev in Thread] Current Thread [Next in Thread]