Re: [qemu-s390x] [PATCH v2 5/5] s390x/cpumodel: Set up CPU model for AP device support

[David Hildenbrand]

>      vfio_group = vfio_ap_get_group(vapdev, &local_err);
>      if (!vfio_group) {
>          goto out_err;
> diff --git a/linux-headers/asm-s390/kvm.h b/linux-headers/asm-s390/kvm.h
> index 11def14..35a6d04 100644
> --- a/linux-headers/asm-s390/kvm.h
> +++ b/linux-headers/asm-s390/kvm.h
> @@ -130,6 +130,7 @@ struct kvm_s390_vm_cpu_machine {
>  #define KVM_S390_VM_CPU_FEAT_PFMFI   11
>  #define KVM_S390_VM_CPU_FEAT_SIGPIF  12
>  #define KVM_S390_VM_CPU_FEAT_KSS     13
> +#define KVM_S390_VM_CPU_FEAT_AP              14
>  struct kvm_s390_vm_cpu_feat {
>       __u64 feat[16];
>  };
> diff --git a/target/s390x/cpu_features.c b/target/s390x/cpu_features.c
> index a5619f2..65b91bd 100644
> --- a/target/s390x/cpu_features.c
> +++ b/target/s390x/cpu_features.c
> @@ -36,8 +36,10 @@ static const S390FeatDef s390_features[] = {
>      FEAT_INIT("srs", S390_FEAT_TYPE_STFL, 9, "Sense-running-status 
> facility"),
>      FEAT_INIT("csske", S390_FEAT_TYPE_STFL, 10, "Conditional-SSKE facility"),
>      FEAT_INIT("ctop", S390_FEAT_TYPE_STFL, 11, "Configuration-topology 
> facility"),
> +    FEAT_INIT("qci", S390_FEAT_TYPE_STFL, 12, "Query AP Configuration 
> facility"),
>      FEAT_INIT("ipter", S390_FEAT_TYPE_STFL, 13, "IPTE-range facility"),
>      FEAT_INIT("nonqks", S390_FEAT_TYPE_STFL, 14, "Nonquiescing key-setting 
> facility"),
> +    FEAT_INIT("apft", S390_FEAT_TYPE_STFL, 15, "Adjunct Processor Facilities 
> Test facility"),
>      FEAT_INIT("etf2", S390_FEAT_TYPE_STFL, 16, "Extended-translation 
> facility 2"),
>      FEAT_INIT("msa-base", S390_FEAT_TYPE_STFL, 17, "Message-security-assist 
> facility (excluding subfunctions)"),
>      FEAT_INIT("ldisp", S390_FEAT_TYPE_STFL, 18, "Long-displacement 
> facility"),
> @@ -125,6 +127,7 @@ static const S390FeatDef s390_features[] = {
>  
>      FEAT_INIT("dateh2", S390_FEAT_TYPE_MISC, 0, "DAT-enhancement facility 
> 2"),
>      FEAT_INIT("cmm", S390_FEAT_TYPE_MISC, 0, 
> "Collaborative-memory-management facility"),
> +    FEAT_INIT("ap", S390_FEAT_TYPE_MISC, 1, "AP facilities installed"),

How exactly is this feature communicated to the guest? How does KVM
sense support for it?

IOW: is this really a CPU model feature?

>  
>      FEAT_INIT("plo-cl", S390_FEAT_TYPE_PLO, 0, "PLO Compare and load (32 bit 
> in general registers)"),
>      FEAT_INIT("plo-clg", S390_FEAT_TYPE_PLO, 1, "PLO Compare and load (64 
> bit in parameter list)"),
> diff --git a/target/s390x/cpu_features_def.h b/target/s390x/cpu_features_def.h
> index 7c5915c..8998b65 100644
> --- a/target/s390x/cpu_features_def.h
> +++ b/target/s390x/cpu_features_def.h
> @@ -27,8 +27,10 @@ typedef enum {
>      S390_FEAT_SENSE_RUNNING_STATUS,
>      S390_FEAT_CONDITIONAL_SSKE,
>      S390_FEAT_CONFIGURATION_TOPOLOGY,
> +    S390_FEAT_AP_QUERY_CONFIG_INFO,
>      S390_FEAT_IPTE_RANGE,
>      S390_FEAT_NONQ_KEY_SETTING,
> +    S390_FEAT_AP_FACILITIES_TEST,
>      S390_FEAT_EXTENDED_TRANSLATION_2,
>      S390_FEAT_MSA,
>      S390_FEAT_LONG_DISPLACEMENT,
> @@ -118,6 +120,7 @@ typedef enum {
>      /* Misc */
>      S390_FEAT_DAT_ENH_2,
>      S390_FEAT_CMM,
> +    S390_FEAT_AP,
>  
>      /* PLO */
>      S390_FEAT_PLO_CL,
> diff --git a/target/s390x/cpu_models.c b/target/s390x/cpu_models.c
> index 1d5f0da..35f91ea 100644
> --- a/target/s390x/cpu_models.c
> +++ b/target/s390x/cpu_models.c
> @@ -770,6 +770,8 @@ static void check_consistency(const S390CPUModel *model)
>          { S390_FEAT_PRNO_TRNG_QRTCR, S390_FEAT_MSA_EXT_5 },
>          { S390_FEAT_PRNO_TRNG, S390_FEAT_MSA_EXT_5 },
>          { S390_FEAT_SIE_KSS, S390_FEAT_SIE_F2 },
> +        { S390_FEAT_AP_QUERY_CONFIG_INFO, S390_FEAT_AP },
> +        { S390_FEAT_AP_FACILITIES_TEST, S390_FEAT_AP },
>      };
>      int i;
>  
> @@ -900,6 +902,16 @@ void s390_realize_cpu_model(CPUState *cs, Error **errp)
>      cpu->model->cpu_id_format = max_model->cpu_id_format;
>      cpu->model->cpu_ver = max_model->cpu_ver;
>  
> +    /*
> +     * If the AP facilities are not installed on the guest, then it makes
> +     * no sense to enable the QCI or APFT facilities because they are only
> +     * needed by AP facilities.
> +     */
> +    if (!test_bit(S390_FEAT_AP, cpu->model->features)) {
> +        clear_bit(S390_FEAT_AP_QUERY_CONFIG_INFO, cpu->model->features);
> +        clear_bit(S390_FEAT_AP_FACILITIES_TEST, cpu->model->features);
> +    }

Please don't silently disable things. Instead

a) Add consistency checks (check_consistency())
b) Mask the bits out in the KVM CPU model sensing part
  (kvm_s390_get_host_cpu_model()) - which you already have :)

> +
>      check_consistency(cpu->model);
>      check_compatibility(max_model, cpu->model, errp);
>      if (*errp) {
> diff --git a/target/s390x/gen-features.c b/target/s390x/gen-features.c
> index 0cdbc15..2d01b52 100644
> --- a/target/s390x/gen-features.c
> +++ b/target/s390x/gen-features.c
> @@ -447,6 +447,9 @@ static uint16_t full_GEN12_GA1[] = {
>      S390_FEAT_ADAPTER_INT_SUPPRESSION,
>      S390_FEAT_EDAT_2,
>      S390_FEAT_SIDE_EFFECT_ACCESS_ESOP2,
> +    S390_FEAT_AP,
> +    S390_FEAT_AP_QUERY_CONFIG_INFO,
> +    S390_FEAT_AP_FACILITIES_TEST,
>  };

Please keep the order as defined in target/s390x/cpu_features_def.h

>  
>  static uint16_t full_GEN12_GA2[] = {
> diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c
> index e13c890..ae20ed8 100644
> --- a/target/s390x/kvm.c
> +++ b/target/s390x/kvm.c
> @@ -2105,6 +2105,7 @@ static int kvm_to_feat[][2] = {
>      { KVM_S390_VM_CPU_FEAT_PFMFI, S390_FEAT_SIE_PFMFI},
>      { KVM_S390_VM_CPU_FEAT_SIGPIF, S390_FEAT_SIE_SIGPIF},
>      { KVM_S390_VM_CPU_FEAT_KSS, S390_FEAT_SIE_KSS},
> +    { KVM_S390_VM_CPU_FEAT_AP, S390_FEAT_AP},

Nothing speaks against the STFL bits, want to learn more about the
S390_FEAT_AP feature :)


-- 

Thanks,

David / dhildenb