[qemu-s390x] [PULL 44/46] tests: Enable the very simple virtio tests on s390x, too

[Cornelia Huck]

From: Thomas Huth <address@hidden>

These tests can easily be used on s390x, too. We just have to make
sure to use the virtio-xxx-ccw devices instead of virtio-xxx-pci.

Signed-off-by: Thomas Huth <address@hidden>
Message-Id: <address@hidden>
Reviewed-by: Eric Blake <address@hidden>
Acked-by: Michael S. Tsirkin <address@hidden>
Acked-by: Christian Borntraeger <address@hidden>
Signed-off-by: Cornelia Huck <address@hidden>
---
 tests/Makefile.include      |  9 ++++++---
 tests/virtio-balloon-test.c |  8 +++++---
 tests/virtio-console-test.c | 19 +++++++++++--------
 tests/virtio-serial-test.c  | 10 ++++++----
 4 files changed, 28 insertions(+), 18 deletions(-)

diff --git a/tests/Makefile.include b/tests/Makefile.include
index 4ca15e6817..70dc711bca 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -367,6 +367,9 @@ check-qtest-s390x-$(CONFIG_SLIRP) += 
tests/test-netfilter$(EXESUF)
 check-qtest-s390x-$(CONFIG_POSIX) += tests/test-filter-mirror$(EXESUF)
 check-qtest-s390x-$(CONFIG_POSIX) += tests/test-filter-redirector$(EXESUF)
 check-qtest-s390x-y += tests/drive_del-test$(EXESUF)
+check-qtest-s390x-y += tests/virtio-balloon-test$(EXESUF)
+check-qtest-s390x-y += tests/virtio-console-test$(EXESUF)
+check-qtest-s390x-y += tests/virtio-serial-test$(EXESUF)
 
 check-qtest-generic-y += tests/qom-test$(EXESUF)
 check-qtest-generic-y += tests/test-hmp$(EXESUF)
@@ -754,14 +757,14 @@ tests/vmxnet3-test$(EXESUF): tests/vmxnet3-test.o
 tests/ne2000-test$(EXESUF): tests/ne2000-test.o
 tests/wdt_ib700-test$(EXESUF): tests/wdt_ib700-test.o
 tests/tco-test$(EXESUF): tests/tco-test.o $(libqos-pc-obj-y)
-tests/virtio-balloon-test$(EXESUF): tests/virtio-balloon-test.o
+tests/virtio-balloon-test$(EXESUF): tests/virtio-balloon-test.o 
$(libqos-virtio-obj-y)
 tests/virtio-blk-test$(EXESUF): tests/virtio-blk-test.o $(libqos-virtio-obj-y)
 tests/virtio-net-test$(EXESUF): tests/virtio-net-test.o $(libqos-pc-obj-y) 
$(libqos-virtio-obj-y)
 tests/virtio-rng-test$(EXESUF): tests/virtio-rng-test.o $(libqos-pc-obj-y)
 tests/virtio-scsi-test$(EXESUF): tests/virtio-scsi-test.o 
$(libqos-virtio-obj-y)
 tests/virtio-9p-test$(EXESUF): tests/virtio-9p-test.o $(libqos-virtio-obj-y)
-tests/virtio-serial-test$(EXESUF): tests/virtio-serial-test.o
-tests/virtio-console-test$(EXESUF): tests/virtio-console-test.o
+tests/virtio-serial-test$(EXESUF): tests/virtio-serial-test.o 
$(libqos-virtio-obj-y)
+tests/virtio-console-test$(EXESUF): tests/virtio-console-test.o 
$(libqos-virtio-obj-y)
 tests/tpci200-test$(EXESUF): tests/tpci200-test.o
 tests/display-vga-test$(EXESUF): tests/display-vga-test.o
 tests/ipoctal232-test$(EXESUF): tests/ipoctal232-test.o
diff --git a/tests/virtio-balloon-test.c b/tests/virtio-balloon-test.c
index 0d0046bf25..0a07e036bb 100644
--- a/tests/virtio-balloon-test.c
+++ b/tests/virtio-balloon-test.c
@@ -9,9 +9,10 @@
 
 #include "qemu/osdep.h"
 #include "libqtest.h"
+#include "libqos/virtio.h"
 
 /* Tests only initialization so far. TODO: Replace with functional tests */
-static void pci_nop(void)
+static void balloon_nop(void)
 {
 }
 
@@ -20,9 +21,10 @@ int main(int argc, char **argv)
     int ret;
 
     g_test_init(&argc, &argv, NULL);
-    qtest_add_func("/virtio/balloon/pci/nop", pci_nop);
+    qtest_add_func("/virtio/balloon/nop", balloon_nop);
 
-    qtest_start("-device virtio-balloon-pci");
+    global_qtest = qtest_startf("-device virtio-balloon-%s",
+                                qvirtio_get_dev_type());
     ret = g_test_run();
 
     qtest_end();
diff --git a/tests/virtio-console-test.c b/tests/virtio-console-test.c
index 1c3de072f4..945bae5a15 100644
--- a/tests/virtio-console-test.c
+++ b/tests/virtio-console-test.c
@@ -9,27 +9,30 @@
 
 #include "qemu/osdep.h"
 #include "libqtest.h"
+#include "libqos/virtio.h"
 
 /* Tests only initialization so far. TODO: Replace with functional tests */
-static void console_pci_nop(void)
+static void console_nop(void)
 {
-    qtest_start("-device virtio-serial-pci,id=vser0 "
-                "-device virtconsole,bus=vser0.0");
+    global_qtest = qtest_startf("-device virtio-serial-%s,id=vser0 "
+                                "-device virtconsole,bus=vser0.0",
+                                qvirtio_get_dev_type());
     qtest_end();
 }
 
-static void serialport_pci_nop(void)
+static void serialport_nop(void)
 {
-    qtest_start("-device virtio-serial-pci,id=vser0 "
-                "-device virtserialport,bus=vser0.0");
+    global_qtest = qtest_startf("-device virtio-serial-%s,id=vser0 "
+                                "-device virtserialport,bus=vser0.0",
+                                qvirtio_get_dev_type());
     qtest_end();
 }
 
 int main(int argc, char **argv)
 {
     g_test_init(&argc, &argv, NULL);
-    qtest_add_func("/virtio/console/pci/nop", console_pci_nop);
-    qtest_add_func("/virtio/serialport/pci/nop", serialport_pci_nop);
+    qtest_add_func("/virtio/console/nop", console_nop);
+    qtest_add_func("/virtio/serialport/nop", serialport_nop);
 
     return g_test_run();
 }
diff --git a/tests/virtio-serial-test.c b/tests/virtio-serial-test.c
index 7d1517dee3..7cc7060264 100644
--- a/tests/virtio-serial-test.c
+++ b/tests/virtio-serial-test.c
@@ -9,9 +9,10 @@
 
 #include "qemu/osdep.h"
 #include "libqtest.h"
+#include "libqos/virtio.h"
 
 /* Tests only initialization so far. TODO: Replace with functional tests */
-static void pci_nop(void)
+static void virtio_serial_nop(void)
 {
 }
 
@@ -27,10 +28,11 @@ int main(int argc, char **argv)
     int ret;
 
     g_test_init(&argc, &argv, NULL);
-    qtest_add_func("/virtio/serial/pci/nop", pci_nop);
-    qtest_add_func("/virtio/serial/pci/hotplug", hotplug);
+    qtest_add_func("/virtio/serial/nop", virtio_serial_nop);
+    qtest_add_func("/virtio/serial/hotplug", hotplug);
 
-    qtest_start("-device virtio-serial-pci");
+    global_qtest = qtest_startf("-device virtio-serial-%s",
+                                qvirtio_get_dev_type());
     ret = g_test_run();
 
     qtest_end();
-- 
2.13.6