On 2024/11/06 18:10, Phil Dennis-Jordan wrote:
>
>
> On Wed, 6 Nov 2024 at 08:42, Akihiko Odaki <akihiko.odaki@daynix.com
> <mailto:akihiko.odaki@daynix.com>> wrote:
>
> On 2024/11/06 0:30, Phil Dennis-Jordan wrote:
> > From: Alexander Graf <graf@amazon.com <mailto:graf@amazon.com>>
> >
> > Apple defines a new "vmapple" machine type as part of its proprietary
> > macOS Virtualization.Framework vmm. This machine type is similar
> to the
> > virt one, but with subtle differences in base devices, a few special
> > vmapple device additions and a vastly different boot chain.
> >
> > This patch reimplements this machine type in QEMU. To use it, you
> > have to have a readily installed version of macOS for VMApple,
> > run on macOS with -accel hvf, pass the Virtualization.Framework
> > boot rom (AVPBooter) in via -bios, pass the aux and root volume
> as pflash
> > and pass aux and root volume as virtio drives. In addition, you also
> > need to find the machine UUID and pass that as -M vmapple,uuid=
> parameter:
> >
> > $ qemu-system-aarch64 -accel hvf -M vmapple,uuid=0x1234 -m 4G \
> > -bios /System/Library/Frameworks/Virtualization.framework/
> Versions/A/Resources/AVPBooter.vmapple2.bin
> > -drive file=aux,if=pflash,format=raw \
> > -drive file=root,if=pflash,format=raw \
> > -drive file=aux,if=none,id=aux,format=raw \
> > -device vmapple-virtio-aux,drive=aux \
> > -drive file=root,if=none,id=root,format=raw \
> > -device vmapple-virtio-root,drive=root
> >
> > With all these in place, you should be able to see macOS booting
> > successfully.
> >
> > Known issues:
> > - Keyboard and mouse/tablet input is laggy. The reason for this is
> > either that macOS's XHCI driver is broken when the device/
> platform
> > does not support MSI/MSI-X, or there's some unfortunate interplay
> > with Qemu's XHCI implementation in this scenario.
> > - Currently only macOS 12 guests are supported. The boot
> process for
> > 13+ will need further investigation and adjustment.
> >
> > Signed-off-by: Alexander Graf <graf@amazon.com
> <mailto:graf@amazon.com>>
> > Co-authored-by: Phil Dennis-Jordan <phil@philjordan.eu
> <mailto:phil@philjordan.eu>>
> > Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu
> <mailto:phil@philjordan.eu>>
> > ---
> > v3:
> > * Rebased on latest upstream, updated affinity and NIC creation
> > API usage
> > * Included Apple-variant virtio-blk in build dependency
> > * Updated API usage for setting 'redist-region-count' array-
> typed property on GIC.
> > * Switched from virtio HID devices (for which macOS 12 does not
> contain
> > drivers) to an XHCI USB controller and USB HID devices.
> >
> > v4:
> > * Fixups for v4 changes to the other patches in the set.
> > * Corrected the assert macro to use
> > * Removed superfluous endian conversions corresponding to cfg's.
> > * Init error handling improvement.
> > * No need to select CPU type on TCG, as only HVF is supported.
> > * Machine type version bumped to 9.2
> > * #include order improved
> >
> > v5:
> > * Fixed memory reservation for ecam alias region.
> > * Better error handling setting properties on devices.
> > * Simplified the machine ECID/UUID extraction script and
> actually created a
> > file for it rather than quoting its code in documentation.
> >
> > v7:
> > * Tiny error handling fix, un-inlined function.
> >
> > MAINTAINERS | 1 +
> > contrib/vmapple/uuid.sh | 9 +
> > docs/system/arm/vmapple.rst | 60 ++++
> > docs/system/target-arm.rst | 1 +
> > hw/vmapple/Kconfig | 20 ++
> > hw/vmapple/meson.build | 1 +
> > hw/vmapple/vmapple.c | 659 +++++++++++++++++++++++++++++
> +++++++
> > 7 files changed, 751 insertions(+)
> > create mode 100755 contrib/vmapple/uuid.sh
> > create mode 100644 docs/system/arm/vmapple.rst
> > create mode 100644 hw/vmapple/vmapple.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 9d0d26cb65f..9591fd44a34 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -2767,6 +2767,7 @@ R: Phil Dennis-Jordan <phil@philjordan.eu
> <mailto:phil@philjordan.eu>>
> > S: Maintained
> > F: hw/vmapple/*
> > F: include/hw/vmapple/*
> > +F: docs/system/arm/vmapple.rst
> >
> > Subsystems
> > ----------
> > diff --git a/contrib/vmapple/uuid.sh b/contrib/vmapple/uuid.sh
> > new file mode 100755
> > index 00000000000..956e8c3afed
> > --- /dev/null
> > +++ b/contrib/vmapple/uuid.sh
> > @@ -0,0 +1,9 @@
> > +#!/bin/sh
> > +# Used for converting a guest provisioned using
> Virtualization.framework
> > +# for use with the QEMU 'vmapple' aarch64 machine type.
> > +#
> > +# Extracts the Machine UUID from Virtualization.framework VM
> JSON file.
> > +# (as produced by 'macosvm', passed as command line argument)
> > +
> > +plutil -extract machineId raw "$1" | base64 -d | plutil -extract
> ECID raw -
> > +
> > diff --git a/docs/system/arm/vmapple.rst b/docs/system/arm/
> vmapple.rst
> > new file mode 100644
> > index 00000000000..6a634fa4572
> > --- /dev/null
> > +++ b/docs/system/arm/vmapple.rst
> > @@ -0,0 +1,60 @@
> > +VMApple machine emulation
> >
> +========================================================================================
> > +
> > +VMApple is the device model that the macOS built-in hypervisor
> called "Virtualization.framework"
> > +exposes to Apple Silicon macOS guests. The "vmapple" machine
> model in QEMU implements the same
> > +device model, but does not use any code from
> Virtualization.Framework.
> > +
> > +Prerequisites
> > +-------------
> > +
> > +To run the vmapple machine model, you need to
> > +
> > + * Run on Apple Silicon
> > + * Run on macOS 12.0 or above
> > + * Have an already installed copy of a Virtualization.Framework
> macOS 12 virtual machine. I will
> > + assume that you installed it using the macosvm CLI.
> > +
> > +First, we need to extract the UUID from the virtual machine that
> you installed. You can do this
> > +by running the shell script in contrib/vmapple/uuid.sh on the
> macosvm.json file.
> > +
> > +.. code-block:: bash
> > + :caption: uuid.sh script to extract the UUID from a
> macosvm.json file
> > +
> > + $ contrib/vmapple/uuid.sh "path/to/macosvm.json"
> > +
> > +Now we also need to trim the aux partition. It contains metadata
> that we can just discard:
> > +
> > +.. code-block:: bash
> > + :caption: Command to trim the aux file
> > +
> > + $ dd if="aux.img" of="aux.img.trimmed" bs=$(( 0x4000 )) skip=1
> > +
> > +How to run
> > +----------
> > +
> > +Then, we can launch QEMU with the Virtualization.Framework pre-
> boot environment and the readily
> > +installed target disk images. I recommend to port forward the
> VM's ssh and vnc ports to the host
> > +to get better interactive access into the target system:
> > +
> > +.. code-block:: bash
> > + :caption: Example execution command line
> > +
> > + $ UUID=$(uuid.sh macosvm.json)
> > + $ AVPBOOTER=/System/Library/Frameworks/
> Virtualization.framework/Resources/AVPBooter.vmapple2.bin
> > + $ AUX=aux.img.trimmed
> > + $ DISK=disk.img
> > + $ qemu-system-aarch64 \
> > + -serial mon:stdio \
> > + -m 4G \
> > + -accel hvf \
> > + -M vmapple,uuid=$UUID \
> > + -bios $AVPBOOTER \
> > + -drive file="$AUX",if=pflash,format=raw \
> > + -drive file="$DISK",if=pflash,format=raw \
> > + -drive file="$AUX",if=none,id=aux,format=raw \
> > + -drive file="$DISK",if=none,id=root,format=raw \
> > + -device vmapple-virtio-aux,drive=aux \
> > + -device vmapple-virtio-root,drive=root \
> > + -net
> user,ipv6=off,hostfwd=tcp::2222-:22,hostfwd=tcp::5901-:5900 \
> > + -net nic,model=virtio-net-pci \
> > diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst
> > index 9aaa9c414c9..3426f79100b 100644
> > --- a/docs/system/target-arm.rst
> > +++ b/docs/system/target-arm.rst
> > @@ -102,6 +102,7 @@ Board-specific documentation
> > arm/stellaris
> > arm/stm32
> > arm/virt
> > + arm/vmapple
> > arm/xenpvh
> > arm/xlnx-versal-virt
> > arm/xlnx-zynq
> > diff --git a/hw/vmapple/Kconfig b/hw/vmapple/Kconfig
> > index bcd1be63e3c..6a4c4a7fa2e 100644
> > --- a/hw/vmapple/Kconfig
> > +++ b/hw/vmapple/Kconfig
> > @@ -10,3 +10,23 @@ config VMAPPLE_CFG
> > config VMAPPLE_VIRTIO_BLK
> > bool
> >
> > +config VMAPPLE
> > + bool
> > + depends on ARM
> > + depends on HVF
> > + default y if ARM
> > + imply PCI_DEVICES
> > + select ARM_GIC
> > + select PLATFORM_BUS
> > + select PCI_EXPRESS
> > + select PCI_EXPRESS_GENERIC_BRIDGE
> > + select PL011 # UART
> > + select PL031 # RTC
> > + select PL061 # GPIO
> > + select GPIO_PWR
> > + select PVPANIC_MMIO
> > + select VMAPPLE_AES
> > + select VMAPPLE_BDIF
> > + select VMAPPLE_CFG
> > + select MAC_PVG_MMIO
> > + select VMAPPLE_VIRTIO_BLK
> > diff --git a/hw/vmapple/meson.build b/hw/vmapple/meson.build
> > index bf17cf906c9..e572f7d5602 100644
> > --- a/hw/vmapple/meson.build
> > +++ b/hw/vmapple/meson.build
> > @@ -2,3 +2,4 @@ system_ss.add(when: 'CONFIG_VMAPPLE_AES',
> if_true: files('aes.c'))
> > system_ss.add(when: 'CONFIG_VMAPPLE_BDIF', if_true:
> files('bdif.c'))
> > system_ss.add(when: 'CONFIG_VMAPPLE_CFG', if_true: files('cfg.c'))
> > system_ss.add(when: 'CONFIG_VMAPPLE_VIRTIO_BLK', if_true:
> files('virtio-blk.c'))
> > +specific_ss.add(when: 'CONFIG_VMAPPLE', if_true:
> files('vmapple.c'))
> > diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c
> > new file mode 100644
> > index 00000000000..aac3ec35856
> > --- /dev/null
> > +++ b/hw/vmapple/vmapple.c
> > @@ -0,0 +1,659 @@
> > +/*
> > + * VMApple machine emulation
> > + *
> > + * Copyright © 2023 Amazon.com, Inc. or its affiliates. All
> Rights Reserved.
> > + *
> > + * This work is licensed under the terms of the GNU GPL, version
> 2 or later.
> > + * See the COPYING file in the top-level directory.
> > + *
> > + * SPDX-License-Identifier: GPL-2.0-or-later
> > + *
> > + * VMApple is the device model that the macOS built-in
> hypervisor called
> > + * "Virtualization.framework" exposes to Apple Silicon macOS
> guests. The
> > + * machine model in this file implements the same device model
> in QEMU, but
> > + * does not use any code from Virtualization.Framework.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "qemu/bitops.h"
> > +#include "qemu/datadir.h"
> > +#include "qemu/error-report.h"
> > +#include "qemu/guest-random.h"
> > +#include "qemu/help-texts.h"
> > +#include "qemu/log.h"
> > +#include "qemu/module.h"
> > +#include "qemu/option.h"
> > +#include "qemu/units.h"
> > +#include "monitor/qdev.h"
> > +#include "hw/boards.h"
> > +#include "hw/irq.h"
> > +#include "hw/loader.h"
> > +#include "hw/qdev-properties.h"
> > +#include "hw/sysbus.h"
> > +#include "hw/usb.h"
> > +#include "hw/arm/boot.h"
> > +#include "hw/arm/primecell.h"
> > +#include "hw/char/pl011.h"
> > +#include "hw/intc/arm_gic.h"
> > +#include "hw/intc/arm_gicv3_common.h"
> > +#include "hw/misc/pvpanic.h"
> > +#include "hw/pci-host/gpex.h"
> > +#include "hw/usb/xhci.h"
> > +#include "hw/virtio/virtio-pci.h"
> > +#include "hw/vmapple/vmapple.h"
> > +#include "net/net.h"
> > +#include "qapi/error.h"
> > +#include "qapi/qmp/qlist.h"
> > +#include "qapi/visitor.h"
> > +#include "qapi/qapi-visit-common.h"
> > +#include "standard-headers/linux/input.h"
> > +#include "sysemu/hvf.h"
> > +#include "sysemu/kvm.h"
> > +#include "sysemu/reset.h"
> > +#include "sysemu/runstate.h"
> > +#include "sysemu/sysemu.h"
> > +#include "target/arm/internals.h"
> > +#include "target/arm/kvm_arm.h"
> > +
> > +struct VMAppleMachineClass {
> > + MachineClass parent;
> > +};
> > +
> > +struct VMAppleMachineState {
> > + MachineState parent;
> > +
> > + Notifier machine_done;
> > + struct arm_boot_info bootinfo;
> > + MemMapEntry *memmap;
> > + const int *irqmap;
> > + DeviceState *gic;
> > + DeviceState *cfg;
> > + Notifier powerdown_notifier;
> > + PCIBus *bus;
> > + MemoryRegion fw_mr;
> > + MemoryRegion ecam_alias;
> > + uint64_t uuid;
> > +};
> > +
> > +#define DEFINE_VMAPPLE_MACHINE_LATEST(major, minor, latest) \
> > + static void
> vmapple##major##_##minor##_class_init(ObjectClass *oc, \
> > + void *data) \
> > + { \
> > + MachineClass *mc = MACHINE_CLASS(oc); \
> > + vmapple_machine_##major##_##minor##_options(mc); \
> > + mc->desc = "QEMU " # major "." # minor " Apple Virtual
> Machine"; \
> > + if (latest) { \
> > + mc->alias = "vmapple"; \
> > + } \
> > + } \
> > + static const TypeInfo machvmapple##major##_##minor##_info = { \
> > + .name = MACHINE_TYPE_NAME("vmapple-" # major "." # minor), \
> > + .parent = TYPE_VMAPPLE_MACHINE, \
> > + .class_init = vmapple##major##_##minor##_class_init, \
> > + }; \
> > + static void machvmapple_machine_##major##_##minor##_init(void) \
> > + { \
> > +
> type_register_static(&machvmapple##major##_##minor##_info); \
> > + } \
> > + type_init(machvmapple_machine_##major##_##minor##_init);
> > +
> > +#define DEFINE_VMAPPLE_MACHINE_AS_LATEST(major, minor) \
> > + DEFINE_VMAPPLE_MACHINE_LATEST(major, minor, true)
> > +#define DEFINE_VMAPPLE_MACHINE(major, minor) \
> > + DEFINE_VMAPPLE_MACHINE_LATEST(major, minor, false)
> > +
> > +#define TYPE_VMAPPLE_MACHINE MACHINE_TYPE_NAME("vmapple")
> > +OBJECT_DECLARE_TYPE(VMAppleMachineState, VMAppleMachineClass,
> VMAPPLE_MACHINE)
> > +
> > +/* Number of external interrupt lines to configure the GIC with */
> > +#define NUM_IRQS 256
> > +
> > +enum {
> > + VMAPPLE_FIRMWARE,
> > + VMAPPLE_CONFIG,
> > + VMAPPLE_MEM,
> > + VMAPPLE_GIC_DIST,
> > + VMAPPLE_GIC_REDIST,
> > + VMAPPLE_UART,
> > + VMAPPLE_RTC,
> > + VMAPPLE_PCIE,
> > + VMAPPLE_PCIE_MMIO,
> > + VMAPPLE_PCIE_ECAM,
> > + VMAPPLE_GPIO,
> > + VMAPPLE_PVPANIC,
> > + VMAPPLE_APV_GFX,
> > + VMAPPLE_APV_IOSFC,
> > + VMAPPLE_AES_1,
> > + VMAPPLE_AES_2,
> > + VMAPPLE_BDOOR,
> > + VMAPPLE_MEMMAP_LAST,
> > +};
> > +
> > +static MemMapEntry memmap[] = {
> > + [VMAPPLE_FIRMWARE] = { 0x00100000, 0x00100000 },
> > + [VMAPPLE_CONFIG] = { 0x00400000, 0x00010000 },
> > +
> > + [VMAPPLE_GIC_DIST] = { 0x10000000, 0x00010000 },
> > + [VMAPPLE_GIC_REDIST] = { 0x10010000, 0x00400000 },
> > +
> > + [VMAPPLE_UART] = { 0x20010000, 0x00010000 },
> > + [VMAPPLE_RTC] = { 0x20050000, 0x00001000 },
> > + [VMAPPLE_GPIO] = { 0x20060000, 0x00001000 },
> > + [VMAPPLE_PVPANIC] = { 0x20070000, 0x00000002 },
> > + [VMAPPLE_BDOOR] = { 0x30000000, 0x00200000 },
> > + [VMAPPLE_APV_GFX] = { 0x30200000, 0x00010000 },
> > + [VMAPPLE_APV_IOSFC] = { 0x30210000, 0x00010000 },
> > + [VMAPPLE_AES_1] = { 0x30220000, 0x00004000 },
> > + [VMAPPLE_AES_2] = { 0x30230000, 0x00004000 },
> > + [VMAPPLE_PCIE_ECAM] = { 0x40000000, 0x10000000 },
> > + [VMAPPLE_PCIE_MMIO] = { 0x50000000, 0x1fff0000 },
> > +
> > + /* Actual RAM size depends on configuration */
> > + [VMAPPLE_MEM] = { 0x70000000ULL, GiB},
> > +};
> > +
> > +static const int irqmap[] = {
> > + [VMAPPLE_UART] = 1,
> > + [VMAPPLE_RTC] = 2,
> > + [VMAPPLE_GPIO] = 0x5,
> > + [VMAPPLE_APV_IOSFC] = 0x10,
> > + [VMAPPLE_APV_GFX] = 0x11,
> > + [VMAPPLE_AES_1] = 0x12,
> > + [VMAPPLE_PCIE] = 0x20,
> > +};
> > +
> > +#define GPEX_NUM_IRQS 16
> > +
> > +static void create_bdif(VMAppleMachineState *vms, MemoryRegion *mem)
> > +{
> > + DeviceState *bdif;
> > + SysBusDevice *bdif_sb;
> > + DriveInfo *di_aux = drive_get(IF_PFLASH, 0, 0);
> > + DriveInfo *di_root = drive_get(IF_PFLASH, 0, 1);
> > +
> > + if (!di_aux) {
> > + error_report("No AUX device. Please specify one as
> pflash drive.");
> > + exit(1);
> > + }
> > +
> > + if (!di_root) {
> > + /* Fall back to the first IF_VIRTIO device as root device */
> > + di_root = drive_get(IF_VIRTIO, 0, 0);
> > + }
> > +
> > + if (!di_root) {
> > + error_report("No root device. Please specify one as
> virtio drive.");
> > + exit(1);
> > + }
> > +
> > + /* PV backdoor device */
> > + bdif = qdev_new(TYPE_VMAPPLE_BDIF);
> > + bdif_sb = SYS_BUS_DEVICE(bdif);
> > + sysbus_mmio_map(bdif_sb, 0, vms->memmap[VMAPPLE_BDOOR].base);
> > +
> > + qdev_prop_set_drive(DEVICE(bdif), "aux",
> blk_by_legacy_dinfo(di_aux));
> > + qdev_prop_set_drive(DEVICE(bdif), "root",
> blk_by_legacy_dinfo(di_root));
> > +
> > + sysbus_realize_and_unref(bdif_sb, &error_fatal);
> > +}
> > +
> > +static void create_pvpanic(VMAppleMachineState *vms,
> MemoryRegion *mem)
> > +{
> > + SysBusDevice *cfg;
> > +
> > + vms->cfg = qdev_new(TYPE_PVPANIC_MMIO_DEVICE);
> > + cfg = SYS_BUS_DEVICE(vms->cfg);
> > + sysbus_mmio_map(cfg, 0, vms->memmap[VMAPPLE_PVPANIC].base);
> > +
> > + sysbus_realize_and_unref(cfg, &error_fatal);
> > +}
> > +
> > +static void create_cfg(VMAppleMachineState *vms, MemoryRegion *mem)
> > +{
> > + SysBusDevice *cfg;
> > + MachineState *machine = MACHINE(vms);
> > + uint32_t rnd = 1;
> > +
> > + vms->cfg = qdev_new(TYPE_VMAPPLE_CFG);
> > + cfg = SYS_BUS_DEVICE(vms->cfg);
> > + sysbus_mmio_map(cfg, 0, vms->memmap[VMAPPLE_CONFIG].base);
> > +
> > + qemu_guest_getrandom_nofail(&rnd, sizeof(rnd));
> > +
> > + qdev_prop_set_uint32(vms->cfg, "nr-cpus", machine->smp.cpus);
> > + qdev_prop_set_uint64(vms->cfg, "ecid", vms->uuid);
> > + qdev_prop_set_uint64(vms->cfg, "ram-size", machine->ram_size);
> > + qdev_prop_set_uint32(vms->cfg, "rnd", rnd);
> > +
> > + sysbus_realize_and_unref(cfg, &error_fatal);
> > +}
> > +
> > +static void create_gfx(VMAppleMachineState *vms, MemoryRegion *mem)
> > +{
> > + int irq_gfx = vms->irqmap[VMAPPLE_APV_GFX];
> > + int irq_iosfc = vms->irqmap[VMAPPLE_APV_IOSFC];
> > + SysBusDevice *gfx;
> > +
> > + gfx = SYS_BUS_DEVICE(qdev_new("apple-gfx-mmio"));
> > + sysbus_mmio_map(gfx, 0, vms->memmap[VMAPPLE_APV_GFX].base);
> > + sysbus_mmio_map(gfx, 1, vms->memmap[VMAPPLE_APV_IOSFC].base);
> > + sysbus_connect_irq(gfx, 0, qdev_get_gpio_in(vms->gic, irq_gfx));
> > + sysbus_connect_irq(gfx, 1, qdev_get_gpio_in(vms->gic,
> irq_iosfc));
> > + sysbus_realize_and_unref(gfx, &error_fatal);
> > +}
> > +
> > +static void create_aes(VMAppleMachineState *vms, MemoryRegion *mem)
> > +{
> > + int irq = vms->irqmap[VMAPPLE_AES_1];
> > + SysBusDevice *aes;
> > +
> > + aes = SYS_BUS_DEVICE(qdev_new(TYPE_APPLE_AES));
> > + sysbus_mmio_map(aes, 0, vms->memmap[VMAPPLE_AES_1].base);
> > + sysbus_mmio_map(aes, 1, vms->memmap[VMAPPLE_AES_2].base);
> > + sysbus_connect_irq(aes, 0, qdev_get_gpio_in(vms->gic, irq));
> > + sysbus_realize_and_unref(aes, &error_fatal);
> > +}
> > +
> > +static int arm_gic_ppi_index(int cpu_nr, int ppi_index)
> > +{
> > + return NUM_IRQS + cpu_nr * GIC_INTERNAL + ppi_index;
> > +}
> > +
> > +static void create_gic(VMAppleMachineState *vms, MemoryRegion *mem)
> > +{
> > + MachineState *ms = MACHINE(vms);
> > + /* We create a standalone GIC */
> > + SysBusDevice *gicbusdev;
> > + QList *redist_region_count;
> > + int i;
> > + unsigned int smp_cpus = ms->smp.cpus;
> > +
> > + vms->gic = qdev_new(gicv3_class_name());
> > + qdev_prop_set_uint32(vms->gic, "revision", 3);
> > + qdev_prop_set_uint32(vms->gic, "num-cpu", smp_cpus);
> > + /*
> > + * Note that the num-irq property counts both internal and
> external
> > + * interrupts; there are always 32 of the former (mandated
> by GIC spec).
> > + */
> > + qdev_prop_set_uint32(vms->gic, "num-irq", NUM_IRQS + 32);
> > +
> > + uint32_t redist0_capacity =
> > + vms->memmap[VMAPPLE_GIC_REDIST].size /
> GICV3_REDIST_SIZE;
> > + uint32_t redist0_count = MIN(smp_cpus, redist0_capacity);
> > +
> > + redist_region_count = qlist_new();
> > + qlist_append_int(redist_region_count, redist0_count);
> > + qdev_prop_set_array(vms->gic, "redist-region-count",
> redist_region_count);
> > +
> > + gicbusdev = SYS_BUS_DEVICE(vms->gic);
> > + sysbus_realize_and_unref(gicbusdev, &error_fatal);
> > + sysbus_mmio_map(gicbusdev, 0, vms-
> >memmap[VMAPPLE_GIC_DIST].base);
> > + sysbus_mmio_map(gicbusdev, 1, vms-
> >memmap[VMAPPLE_GIC_REDIST].base);
> > +
> > + /*
> > + * Wire the outputs from each CPU's generic timer and the GICv3
> > + * maintenance interrupt signal to the appropriate GIC PPI
> inputs,
> > + * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the
> CPU's inputs.
> > + */
> > + for (i = 0; i < smp_cpus; i++) {
> > + DeviceState *cpudev = DEVICE(qemu_get_cpu(i));
> > +
> > + /* Map the virt timer to PPI 27 */
> > + qdev_connect_gpio_out(cpudev, GTIMER_VIRT,
> > + qdev_get_gpio_in(vms->gic,
> > +
> arm_gic_ppi_index(i, 27)));
> > +
> > + /* Map the GIC IRQ and FIQ lines to CPU */
> > + sysbus_connect_irq(gicbusdev, i,
> qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
> > + sysbus_connect_irq(gicbusdev, i + smp_cpus,
> > + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
> > + }
> > +}
> > +
> > +static void create_uart(const VMAppleMachineState *vms, int uart,
> > + MemoryRegion *mem, Chardev *chr)
> > +{
> > + hwaddr base = vms->memmap[uart].base;
> > + int irq = vms->irqmap[uart];
> > + DeviceState *dev = qdev_new(TYPE_PL011);
> > + SysBusDevice *s = SYS_BUS_DEVICE(dev);
> > +
> > + qdev_prop_set_chr(dev, "chardev", chr);
> > + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
> > + memory_region_add_subregion(mem, base,
> > + sysbus_mmio_get_region(s, 0));
> > + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq));
> > +}
> > +
> > +static void create_rtc(const VMAppleMachineState *vms)
> > +{
> > + hwaddr base = vms->memmap[VMAPPLE_RTC].base;
> > + int irq = vms->irqmap[VMAPPLE_RTC];
> > +
> > + sysbus_create_simple("pl031", base, qdev_get_gpio_in(vms-
> >gic, irq));
> > +}
> > +
> > +static DeviceState *gpio_key_dev;
> > +static void vmapple_powerdown_req(Notifier *n, void *opaque)
> > +{
> > + /* use gpio Pin 3 for power button event */
> > + qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1);
> > +}
> > +
> > +static void create_gpio_devices(const VMAppleMachineState *vms,
> int gpio,
> > + MemoryRegion *mem)
> > +{
> > + DeviceState *pl061_dev;
> > + hwaddr base = vms->memmap[gpio].base;
> > + int irq = vms->irqmap[gpio];
> > + SysBusDevice *s;
> > +
> > + pl061_dev = qdev_new("pl061");
> > + /* Pull lines down to 0 if not driven by the PL061 */
> > + qdev_prop_set_uint32(pl061_dev, "pullups", 0);
> > + qdev_prop_set_uint32(pl061_dev, "pulldowns", 0xff);
> > + s = SYS_BUS_DEVICE(pl061_dev);
> > + sysbus_realize_and_unref(s, &error_fatal);
> > + memory_region_add_subregion(mem, base,
> sysbus_mmio_get_region(s, 0));
> > + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq));
> > + gpio_key_dev = sysbus_create_simple("gpio-key", -1,
> > +
> qdev_get_gpio_in(pl061_dev, 3));
> > +}
> > +
> > +static void vmapple_firmware_init(VMAppleMachineState *vms,
> > + MemoryRegion *sysmem)
> > +{
> > + hwaddr size = vms->memmap[VMAPPLE_FIRMWARE].size;
> > + hwaddr base = vms->memmap[VMAPPLE_FIRMWARE].base;
> > + const char *bios_name;
> > + int image_size;
> > + char *fname;
> > +
> > + bios_name = MACHINE(vms)->firmware;
> > + if (!bios_name) {
> > + error_report("No firmware specified");
> > + exit(1);
> > + }
> > +
> > + fname = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
> > + if (!fname) {
> > + error_report("Could not find ROM image '%s'", bios_name);
> > + exit(1);
> > + }
> > +
> > + memory_region_init_ram(&vms->fw_mr, NULL, "firmware", size,
> &error_fatal);
> > + image_size = load_image_mr(fname, &vms->fw_mr);
> > +
> > + g_free(fname);
> > + if (image_size < 0) {
> > + error_report("Could not load ROM image '%s'", bios_name);
> > + exit(1);
> > + }
> > +
> > + memory_region_add_subregion(get_system_memory(), base, &vms-
> >fw_mr);
> > +}
> > +
> > +static void create_pcie(VMAppleMachineState *vms)
> > +{
> > + hwaddr base_mmio = vms->memmap[VMAPPLE_PCIE_MMIO].base;
> > + hwaddr size_mmio = vms->memmap[VMAPPLE_PCIE_MMIO].size;
> > + hwaddr base_ecam = vms->memmap[VMAPPLE_PCIE_ECAM].base;
> > + hwaddr size_ecam = vms->memmap[VMAPPLE_PCIE_ECAM].size;
> > + int irq = vms->irqmap[VMAPPLE_PCIE];
> > + MemoryRegion *mmio_alias;
> > + MemoryRegion *mmio_reg;
> > + MemoryRegion *ecam_reg;
> > + DeviceState *dev;
> > + int i;
> > + PCIHostState *pci;
> > + DeviceState *usb_controller;
> > + USBBus *usb_bus;
> > +
> > + dev = qdev_new(TYPE_GPEX_HOST);
> > + qdev_prop_set_uint32(dev, "num-irqs", GPEX_NUM_IRQS);
> > + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
> > +
> > + /* Map only the first size_ecam bytes of ECAM space */
> > + ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
> > + memory_region_init_alias(&vms->ecam_alias, OBJECT(dev),
> "pcie-ecam",
> > + ecam_reg, 0, size_ecam);
> > + memory_region_add_subregion(get_system_memory(), base_ecam,
> > + &vms->ecam_alias);
> > +
> > + /*
> > + * Map the MMIO window from [0x50000000-0x7fff0000] in PCI
> space into
> > + * system address space at [0x50000000-0x7fff0000].
> > + */
> > + mmio_alias = g_new0(MemoryRegion, 1);
> > + mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
> > + memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio",
> > + mmio_reg, base_mmio, size_mmio);
> > + memory_region_add_subregion(get_system_memory(), base_mmio,
> mmio_alias);
> > +
> > + for (i = 0; i < GPEX_NUM_IRQS; i++) {
> > + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
> > + qdev_get_gpio_in(vms->gic, irq + i));
> > + gpex_set_irq_num(GPEX_HOST(dev), i, irq + i);
> > + }
> > +
> > + pci = PCI_HOST_BRIDGE(dev);
> > + vms->bus = pci->bus;
> > + g_assert(vms->bus);
> > +
> > + while ((dev = qemu_create_nic_device("virtio-net-pci", true,
> NULL))) {
> > + qdev_realize_and_unref(dev, BUS(vms->bus), &error_fatal);
> > + }
> > +
> > + usb_controller = qdev_new(TYPE_QEMU_XHCI);
> > + qdev_realize_and_unref(usb_controller, BUS(pci->bus),
> &error_fatal);
> > +
> > + usb_bus = USB_BUS(object_resolve_type_unambiguous(TYPE_USB_BUS,
> > +
> &error_fatal));
> > + usb_create_simple(usb_bus, "usb-kbd");
> > + usb_create_simple(usb_bus, "usb-tablet");
> > +}
> > +
> > +static void vmapple_reset(void *opaque)
> > +{
> > + VMAppleMachineState *vms = opaque;
> > + hwaddr base = vms->memmap[VMAPPLE_FIRMWARE].base;
> > +
> > + cpu_set_pc(first_cpu, base);
> > +}
> > +
> > +static void mach_vmapple_init(MachineState *machine)
> > +{
> > + VMAppleMachineState *vms = VMAPPLE_MACHINE(machine);
> > + MachineClass *mc = MACHINE_GET_CLASS(machine);
> > + const CPUArchIdList *possible_cpus;
> > + MemoryRegion *sysmem = get_system_memory();
> > + int n;
> > + unsigned int smp_cpus = machine->smp.cpus;
> > + unsigned int max_cpus = machine->smp.max_cpus;
> > +
> > + vms->memmap = memmap;
> > + machine->usb = true;
> > +
> > + possible_cpus = mc->possible_cpu_arch_ids(machine);
> > + assert(possible_cpus->len == max_cpus);
> > + for (n = 0; n < possible_cpus->len; n++) {
> > + Object *cpu;
> > + CPUState *cs;
> > +
> > + if (n >= smp_cpus) {
> > + break;
> > + }
> > +
> > + cpu = object_new(possible_cpus->cpus[n].type);
> > + object_property_set_int(cpu, "mp-affinity",
> > + possible_cpus->cpus[n].arch_id,
> &error_fatal);
> > +
> > + cs = CPU(cpu);
> > + cs->cpu_index = n;
> > +
> > + numa_cpu_pre_plug(&possible_cpus->cpus[cs->cpu_index],
> DEVICE(cpu),
> > + &error_fatal);
> > +
> > + if (object_property_find(cpu, "has_el3")) {
> > + object_property_set_bool(cpu, "has_el3", false,
> &error_fatal);
> > + }
> > + if (object_property_find(cpu, "has_el2")) {
> > + object_property_set_bool(cpu, "has_el2", false,
> &error_fatal);
> > + }
> > + object_property_set_int(cpu, "psci-conduit",
> QEMU_PSCI_CONDUIT_HVC,
> > + &error_fatal);
> > +
> > + /* Secondary CPUs start in PSCI powered-down state */
> > + if (n > 0) {
> > + object_property_set_bool(cpu, "start-powered-off", true,
> > + &error_fatal);
> > + }
> > +
> > + object_property_set_link(cpu, "memory", OBJECT(sysmem),
> &error_abort);
> > + qdev_realize(DEVICE(cpu), NULL, &error_fatal);
> > + object_unref(cpu);
> > + }
> > +
> > + memory_region_add_subregion(sysmem, vms-
> >memmap[VMAPPLE_MEM].base,
> > + machine->ram);
> > +
> > + create_gic(vms, sysmem);
> > + create_bdif(vms, sysmem);
> > + create_pvpanic(vms, sysmem);
> > + create_aes(vms, sysmem);
> > + create_gfx(vms, sysmem);
> > + create_uart(vms, VMAPPLE_UART, sysmem, serial_hd(0));
> > + create_rtc(vms);
> > + create_pcie(vms);
> > +
> > + create_gpio_devices(vms, VMAPPLE_GPIO, sysmem);
> > +
> > + vmapple_firmware_init(vms, sysmem);
> > + create_cfg(vms, sysmem);
> > +
> > + /* connect powerdown request */
> > + vms->powerdown_notifier.notify = vmapple_powerdown_req;
> > + qemu_register_powerdown_notifier(&vms->powerdown_notifier);
> > +
> > + vms->bootinfo.ram_size = machine->ram_size;
> > + vms->bootinfo.board_id = -1;
> > + vms->bootinfo.loader_start = vms->memmap[VMAPPLE_MEM].base;
> > + vms->bootinfo.skip_dtb_autoload = true;
> > + vms->bootinfo.firmware_loaded = true;
> > + arm_load_kernel(ARM_CPU(first_cpu), machine, &vms->bootinfo);
> > +
> > + qemu_register_reset(vmapple_reset, vms);
> > +}
> > +
> > +static CpuInstanceProperties
> > +vmapple_cpu_index_to_props(MachineState *ms, unsigned cpu_index)
> > +{
> > + MachineClass *mc = MACHINE_GET_CLASS(ms);
> > + const CPUArchIdList *possible_cpus = mc-
> >possible_cpu_arch_ids(ms);
> > +
> > + assert(cpu_index < possible_cpus->len);
> > + return possible_cpus->cpus[cpu_index].props;
> > +}
> > +
> > +
> > +static int64_t vmapple_get_default_cpu_node_id(const
> MachineState *ms, int idx)
> > +{
> > + return idx % ms->numa_state->num_nodes;
> > +}
> > +
> > +static const CPUArchIdList
> *vmapple_possible_cpu_arch_ids(MachineState *ms)
> > +{
> > + int n;
> > + unsigned int max_cpus = ms->smp.max_cpus;
> > +
> > + if (ms->possible_cpus) {
> > + assert(ms->possible_cpus->len == max_cpus);
> > + return ms->possible_cpus;
> > + }
> > +
> > + ms->possible_cpus = g_malloc0(sizeof(CPUArchIdList) +
> > + sizeof(CPUArchId) * max_cpus);
> > + ms->possible_cpus->len = max_cpus;
> > + for (n = 0; n < ms->possible_cpus->len; n++) {
> > + ms->possible_cpus->cpus[n].type = ms->cpu_type;
> > + ms->possible_cpus->cpus[n].arch_id =
> > + arm_build_mp_affinity(n, GICV3_TARGETLIST_BITS);
> > + ms->possible_cpus->cpus[n].props.has_thread_id = true;
> > + ms->possible_cpus->cpus[n].props.thread_id = n;
> > + }
> > + return ms->possible_cpus;
> > +}
> > +
> > +static void vmapple_get_uuid(Object *obj, Visitor *v, const char
> *name,
> > + void *opaque, Error **errp)
> > +{
> > + VMAppleMachineState *vms = VMAPPLE_MACHINE(obj);
> > +
> > + visit_type_uint64(v, name, &vms->uuid, errp);
> > +}
> > +
> > +static void vmapple_set_uuid(Object *obj, Visitor *v, const char
> *name,
> > + void *opaque, Error **errp)
> > +{
> > + VMAppleMachineState *vms = VMAPPLE_MACHINE(obj);
> > + Error *error = NULL;
> > +
> > + visit_type_uint64(v, name, &vms->uuid, &error);
> > + if (error) {
> > + error_propagate(errp, error);
> > + return;
> > + }
> > +}
> > +
> > +static void vmapple_machine_class_init(ObjectClass *oc, void *data)
> > +{
> > + MachineClass *mc = MACHINE_CLASS(oc);
> > +
> > + mc->init = mach_vmapple_init;
> > + mc->max_cpus = 32;
> > + mc->block_default_type = IF_VIRTIO;
> > + mc->no_cdrom = 1;
> > + mc->pci_allow_0_address = true;
> > + mc->minimum_page_bits = 12;
> > + mc->possible_cpu_arch_ids = vmapple_possible_cpu_arch_ids;
> > + mc->cpu_index_to_instance_props = vmapple_cpu_index_to_props;
> > + mc->default_cpu_type = ARM_CPU_TYPE_NAME("host");
> > + mc->get_default_cpu_node_id = vmapple_get_default_cpu_node_id;
> > + mc->default_ram_id = "mach-vmapple.ram";
> > +
> > + object_register_sugar_prop(TYPE_VIRTIO_PCI, "disable-legacy",
> > + "on", true);
> > +
> > + object_class_property_add(oc, "uuid", "uint64",
> vmapple_get_uuid,
> > + vmapple_set_uuid, NULL, NULL);
>
> Use: object_class_property_add_uint64_ptr
>
>
> Do I understand correctly that to use this, I need to move the uuid
> field out of VMAppleMachineState and turn it into a global/static
> variable? There are no active uses of
> object_class_property_add_uint64_ptr (or the uint32 version) in the Qemu
> code base to use as reference, but that's what it looks like based on
> the single use of object_class_property_add_uint8_ptr.
>
> I'm not convinced this is an improvement to be honest. (And the lack of
> uptake of this API would suggest I'm not the only one who finds this an
> awkward API - on the other hand, there are lots of examples of
> object_class_property_add() being used for uint64-typed properties
> exactly as Alex has done here.)
I didn't mean to add a class property. object_property_add_uint64_ptr()
will do what we want I think.
As far as I can tell, "class property" in general just means the getter/setter is automatically provided for all instances of the class, which is what we want, but the object_class_property_add_*_ptr() helper functions isn't suitable for genuine per-instance values.
The object property created with object_property_add_uint64_ptr() (no "class") applies to only that object instance, so it needs to be done during instance init. It does seem to work in this case at least, and a bunch of other machine types also use it in a similar way, so I'll use it.
I had a quick look to see if we could make this tidier with a macro that uses offsetof() or so. I think it's possible, but making it safe isn't straightforward; in any case, that improvement is out of scope here. Another option would be to auto-generate getter/setter functions from a macro, which would contain the correct struct field access _expression_ expansion. Probably also not ideal, however.
Regards,
Phil