[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v9 4/5] riscv: Introduce satp mode hw capabilities
From: |
Alexandre Ghiti |
Subject: |
Re: [PATCH v9 4/5] riscv: Introduce satp mode hw capabilities |
Date: |
Thu, 2 Feb 2023 14:00:52 +0100 |
Hi Frank,
On Wed, Feb 1, 2023 at 4:49 PM Frank Chang <frank.chang@sifive.com> wrote:
>
> On Tue, Jan 31, 2023 at 10:36 PM Alexandre Ghiti <alexghiti@rivosinc.com>
> wrote:
>>
>> Currently, the max satp mode is set with the only constraint that it must be
>> implemented in QEMU, i.e. set in valid_vm_1_10_[32|64].
>>
>> But we actually need to add another level of constraint: what the hw is
>> actually capable of, because currently, a linux booting on a sifive-u54
>> boots in sv57 mode which is incompatible with the cpu's sv39 max
>> capability.
>>
>> So add a new bitmap to RISCVSATPMap which contains this capability and
>> initialize it in every XXX_cpu_init.
>>
>> Finally:
>> - valid_vm_1_10_[32|64] constrains which satp mode the CPU can use
>> - the CPU hw capabilities constrains what the user may select
>> - the user's selection then constrains what's available to the guest
>> OS.
>>
>> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
>> Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
>> ---
>> target/riscv/cpu.c | 79 +++++++++++++++++++++++++++++++---------------
>> target/riscv/cpu.h | 8 +++--
>> 2 files changed, 60 insertions(+), 27 deletions(-)
>>
>> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
>> index 3a7a1746aa..6dd76355ec 100644
>> --- a/target/riscv/cpu.c
>> +++ b/target/riscv/cpu.c
>> @@ -292,26 +292,36 @@ const char *satp_mode_str(uint8_t satp_mode, bool
>> is_32_bit)
>> g_assert_not_reached();
>> }
>>
>> -/* Sets the satp mode to the max supported */
>> -static void set_satp_mode_default_map(RISCVCPU *cpu)
>> +static void set_satp_mode_max_supported(RISCVCPU *cpu,
>> + uint8_t satp_mode)
>> {
>> bool rv32 = riscv_cpu_mxl(&cpu->env) == MXL_RV32;
>> + const bool *valid_vm = rv32 ? valid_vm_1_10_32 : valid_vm_1_10_64;
>
>
> This will break user-mode QEMU.
> valid_vm_1_10_32 and valid_vm_1_10_64 are defined in !CONFIG_USER_ONLY
> section.
> This issue also exists in patch 3.
> You have to move valid_vm_1_10_32 and valid_vm_1_10_64 out from
> !CONFIG_USER_ONLY.
Indeed, good catch, thanks! Rather than moving valid_vm_1_10_[32|64],
I'm going to try to surround all the satp handling inside #ifdef
CONFIG_USER_ONLY. But if it's too cumbersome, I'll do as you suggest.
Thanks again,
Alex
>
> Regards,
> Frank Chang
>
>>
>> - if (riscv_feature(&cpu->env, RISCV_FEATURE_MMU)) {
>> - cpu->cfg.satp_mode.map |=
>> - (1 << satp_mode_from_str(rv32 ? "sv32" : "sv57"));
>> - } else {
>> - cpu->cfg.satp_mode.map |= (1 << satp_mode_from_str("mbare"));
>> + for (int i = 0; i <= satp_mode; ++i) {
>> + if (valid_vm[i]) {
>> + cpu->cfg.satp_mode.supported |= (1 << i);
>> + }
>> }
>> }
>>
>> +/* Set the satp mode to the max supported */
>> +static void set_satp_mode_default_map(RISCVCPU *cpu)
>> +{
>> + cpu->cfg.satp_mode.map = cpu->cfg.satp_mode.supported;
>> +}
>> +
>> static void riscv_any_cpu_init(Object *obj)
>> {
>> CPURISCVState *env = &RISCV_CPU(obj)->env;
>> + RISCVCPU *cpu = RISCV_CPU(obj);
>> +
>> #if defined(TARGET_RISCV32)
>> set_misa(env, MXL_RV32, RVI | RVM | RVA | RVF | RVD | RVC | RVU);
>> + set_satp_mode_max_supported(cpu, VM_1_10_SV32);
>> #elif defined(TARGET_RISCV64)
>> set_misa(env, MXL_RV64, RVI | RVM | RVA | RVF | RVD | RVC | RVU);
>> + set_satp_mode_max_supported(cpu, VM_1_10_SV57);
>> #endif
>> set_priv_version(env, PRIV_VERSION_1_12_0);
>> register_cpu_props(obj);
>> @@ -321,18 +331,24 @@ static void riscv_any_cpu_init(Object *obj)
>> static void rv64_base_cpu_init(Object *obj)
>> {
>> CPURISCVState *env = &RISCV_CPU(obj)->env;
>> + RISCVCPU *cpu = RISCV_CPU(obj);
>> +
>> /* We set this in the realise function */
>> set_misa(env, MXL_RV64, 0);
>> register_cpu_props(obj);
>> /* Set latest version of privileged specification */
>> set_priv_version(env, PRIV_VERSION_1_12_0);
>> + set_satp_mode_max_supported(cpu, VM_1_10_SV57);
>> }
>>
>> static void rv64_sifive_u_cpu_init(Object *obj)
>> {
>> CPURISCVState *env = &RISCV_CPU(obj)->env;
>> + RISCVCPU *cpu = RISCV_CPU(obj);
>> +
>> set_misa(env, MXL_RV64, RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
>> set_priv_version(env, PRIV_VERSION_1_10_0);
>> + set_satp_mode_max_supported(cpu, VM_1_10_SV39);
>> }
>>
>> static void rv64_sifive_e_cpu_init(Object *obj)
>> @@ -343,6 +359,7 @@ static void rv64_sifive_e_cpu_init(Object *obj)
>> set_misa(env, MXL_RV64, RVI | RVM | RVA | RVC | RVU);
>> set_priv_version(env, PRIV_VERSION_1_10_0);
>> cpu->cfg.mmu = false;
>> + set_satp_mode_max_supported(cpu, VM_1_10_MBARE);
>> }
>>
>> static void rv128_base_cpu_init(Object *obj)
>> @@ -354,28 +371,36 @@ static void rv128_base_cpu_init(Object *obj)
>> exit(EXIT_FAILURE);
>> }
>> CPURISCVState *env = &RISCV_CPU(obj)->env;
>> + RISCVCPU *cpu = RISCV_CPU(obj);
>> /* We set this in the realise function */
>> set_misa(env, MXL_RV128, 0);
>> register_cpu_props(obj);
>> /* Set latest version of privileged specification */
>> set_priv_version(env, PRIV_VERSION_1_12_0);
>> + set_satp_mode_max_supported(cpu, VM_1_10_SV57);
>> }
>> #else
>> static void rv32_base_cpu_init(Object *obj)
>> {
>> CPURISCVState *env = &RISCV_CPU(obj)->env;
>> + RISCVCPU *cpu = RISCV_CPU(obj);
>> +
>> /* We set this in the realise function */
>> set_misa(env, MXL_RV32, 0);
>> register_cpu_props(obj);
>> /* Set latest version of privileged specification */
>> set_priv_version(env, PRIV_VERSION_1_12_0);
>> + set_satp_mode_max_supported(cpu, VM_1_10_SV32);
>> }
>>
>> static void rv32_sifive_u_cpu_init(Object *obj)
>> {
>> CPURISCVState *env = &RISCV_CPU(obj)->env;
>> + RISCVCPU *cpu = RISCV_CPU(obj);
>> +
>> set_misa(env, MXL_RV32, RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
>> set_priv_version(env, PRIV_VERSION_1_10_0);
>> + set_satp_mode_max_supported(cpu, VM_1_10_SV32);
>> }
>>
>> static void rv32_sifive_e_cpu_init(Object *obj)
>> @@ -386,6 +411,7 @@ static void rv32_sifive_e_cpu_init(Object *obj)
>> set_misa(env, MXL_RV32, RVI | RVM | RVA | RVC | RVU);
>> set_priv_version(env, PRIV_VERSION_1_10_0);
>> cpu->cfg.mmu = false;
>> + set_satp_mode_max_supported(cpu, VM_1_10_MBARE);
>> }
>>
>> static void rv32_ibex_cpu_init(Object *obj)
>> @@ -396,6 +422,7 @@ static void rv32_ibex_cpu_init(Object *obj)
>> set_misa(env, MXL_RV32, RVI | RVM | RVC | RVU);
>> set_priv_version(env, PRIV_VERSION_1_11_0);
>> cpu->cfg.mmu = false;
>> + set_satp_mode_max_supported(cpu, VM_1_10_MBARE);
>> cpu->cfg.epmp = true;
>> }
>>
>> @@ -407,6 +434,7 @@ static void rv32_imafcu_nommu_cpu_init(Object *obj)
>> set_misa(env, MXL_RV32, RVI | RVM | RVA | RVF | RVC | RVU);
>> set_priv_version(env, PRIV_VERSION_1_10_0);
>> cpu->cfg.mmu = false;
>> + set_satp_mode_max_supported(cpu, VM_1_10_MBARE);
>> }
>> #endif
>>
>> @@ -698,8 +726,9 @@ static void riscv_cpu_disas_set_info(CPUState *s,
>> disassemble_info *info)
>> static void riscv_cpu_satp_mode_finalize(RISCVCPU *cpu, Error **errp)
>> {
>> bool rv32 = riscv_cpu_mxl(&cpu->env) == MXL_RV32;
>> - const bool *valid_vm = rv32 ? valid_vm_1_10_32 : valid_vm_1_10_64;
>> - uint8_t satp_mode_max;
>> + uint8_t satp_mode_map_max;
>> + uint8_t satp_mode_supported_max =
>> +
>> satp_mode_max_from_map(cpu->cfg.satp_mode.supported);
>>
>> if (cpu->cfg.satp_mode.map == 0) {
>> if (cpu->cfg.satp_mode.init == 0) {
>> @@ -712,9 +741,10 @@ static void riscv_cpu_satp_mode_finalize(RISCVCPU *cpu,
>> Error **errp)
>> * valid_vm_1_10_32/64.
>> */
>> for (int i = 1; i < 16; ++i) {
>> - if ((cpu->cfg.satp_mode.init & (1 << i)) && valid_vm[i]) {
>> + if ((cpu->cfg.satp_mode.init & (1 << i)) &&
>> + (cpu->cfg.satp_mode.supported & (1 << i))) {
>> for (int j = i - 1; j >= 0; --j) {
>> - if (valid_vm[j]) {
>> + if (cpu->cfg.satp_mode.supported & (1 << j)) {
>> cpu->cfg.satp_mode.map |= (1 << j);
>> break;
>> }
>> @@ -725,37 +755,36 @@ static void riscv_cpu_satp_mode_finalize(RISCVCPU
>> *cpu, Error **errp)
>> }
>> }
>>
>> - /* Make sure the configuration asked is supported by qemu */
>> - for (int i = 0; i < 16; ++i) {
>> - if ((cpu->cfg.satp_mode.map & (1 << i)) && !valid_vm[i]) {
>> - error_setg(errp, "satp_mode %s is not valid",
>> - satp_mode_str(i, rv32));
>> - return;
>> - }
>> + satp_mode_map_max = satp_mode_max_from_map(cpu->cfg.satp_mode.map);
>> +
>> + /* Make sure the user asked for a supported configuration (HW and qemu)
>> */
>> + if (satp_mode_map_max > satp_mode_supported_max) {
>> + error_setg(errp, "satp_mode %s is higher than hw max capability %s",
>> + satp_mode_str(satp_mode_map_max, rv32),
>> + satp_mode_str(satp_mode_supported_max, rv32));
>> + return;
>> }
>>
>> /*
>> * Make sure the user did not ask for an invalid configuration as per
>> * the specification.
>> */
>> - satp_mode_max = satp_mode_max_from_map(cpu->cfg.satp_mode.map);
>> -
>> if (!rv32) {
>> - for (int i = satp_mode_max - 1; i >= 0; --i) {
>> + for (int i = satp_mode_map_max - 1; i >= 0; --i) {
>> if (!(cpu->cfg.satp_mode.map & (1 << i)) &&
>> (cpu->cfg.satp_mode.init & (1 << i)) &&
>> - valid_vm[i]) {
>> + (cpu->cfg.satp_mode.supported & (1 << i))) {
>> error_setg(errp, "cannot disable %s satp mode if %s "
>> "is enabled", satp_mode_str(i, false),
>> - satp_mode_str(satp_mode_max, false));
>> + satp_mode_str(satp_mode_map_max, false));
>> return;
>> }
>> }
>> }
>>
>> /* Finally expand the map so that all valid modes are set */
>> - for (int i = satp_mode_max - 1; i >= 0; --i) {
>> - if (valid_vm[i]) {
>> + for (int i = satp_mode_map_max - 1; i >= 0; --i) {
>> + if (cpu->cfg.satp_mode.supported & (1 << i)) {
>> cpu->cfg.satp_mode.map |= (1 << i);
>> }
>> }
>> diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
>> index e37177db5c..b591122099 100644
>> --- a/target/riscv/cpu.h
>> +++ b/target/riscv/cpu.h
>> @@ -416,13 +416,17 @@ struct RISCVCPUClass {
>>
>> /*
>> * map is a 16-bit bitmap: the most significant set bit in map is the
>> maximum
>> - * satp mode that is supported.
>> + * satp mode that is supported. It may be chosen by the user and must
>> respect
>> + * what qemu implements (valid_1_10_32/64) and what the hw is capable of
>> + * (supported bitmap below).
>> *
>> * init is a 16-bit bitmap used to make sure the user selected a correct
>> * configuration as per the specification.
>> + *
>> + * supported is a 16-bit bitmap used to reflect the hw capabilities.
>> */
>> typedef struct {
>> - uint16_t map, init;
>> + uint16_t map, init, supported;
>> } RISCVSATPMap;
>>
>> struct RISCVCPUConfig {
>> --
>> 2.37.2
>>
>>