qemu-riscv
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v6 1/5] target/riscv: Ignore reserved bits in PTE for RV64


From: Guo Ren
Subject: Re: [PATCH v6 1/5] target/riscv: Ignore reserved bits in PTE for RV64
Date: Tue, 25 Jan 2022 16:40:32 +0800

On Tue, Jan 25, 2022 at 4:34 PM LIU Zhiwei <zhiwei_liu@c-sky.com> wrote:
>
>
> On 2022/1/25 14:45, Weiwei Li wrote:
> > From: Guo Ren <ren_guo@c-sky.com>
> >
> > Highest bits of PTE has been used for svpbmt, ref: [1], [2], so we
> > need to ignore them. They cannot be a part of ppn.
> >
> > 1: The RISC-V Instruction Set Manual, Volume II: Privileged Architecture
> >     4.4 Sv39: Page-Based 39-bit Virtual-Memory System
> >     4.5 Sv48: Page-Based 48-bit Virtual-Memory System
> >
> > 2: 
> > https://github.com/riscv/virtual-memory/blob/main/specs/663-Svpbmt-diff.pdf
> >
> > Signed-off-by: Guo Ren <ren_guo@c-sky.com>
> > Cc: Liu Zhiwei <zhiwei_liu@c-sky.com>
> > Cc: Bin Meng <bmeng.cn@gmail.com>
> > Cc: Alistair Francis <alistair.francis@wdc.com>
> > ---
> >   target/riscv/cpu.h        | 13 +++++++++++++
> >   target/riscv/cpu_bits.h   |  7 +++++++
> >   target/riscv/cpu_helper.c | 14 +++++++++++++-
> >   3 files changed, 33 insertions(+), 1 deletion(-)
> >
> > diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
> > index 55635d68d5..45de8faaca 100644
> > --- a/target/riscv/cpu.h
> > +++ b/target/riscv/cpu.h
> > @@ -341,6 +341,8 @@ struct RISCVCPU {
> >           bool ext_counters;
> >           bool ext_ifencei;
> >           bool ext_icsr;
> > +        bool ext_svnapot;
> > +        bool ext_svpbmt;
> >           bool ext_zfh;
> >           bool ext_zfhmin;
> >           bool ext_zve32f;
> > @@ -495,6 +497,17 @@ static inline int riscv_cpu_xlen(CPURISCVState *env)
> >       return 16 << env->xl;
> >   }
> >
> > +#ifndef CONFIG_USER_ONLY
> > +#ifdef TARGET_RISCV32
> > +#define riscv_cpu_sxl(env)  ((void)(env), MXL_RV32)
> > +#else
> > +static inline RISCVMXL riscv_cpu_sxl(CPURISCVState *env)
> > +{
> > +    return get_field(env->mstatus, MSTATUS64_SXL);
> > +}
> > +#endif
> > +#endif
> > +
>
> Perhaps an interface also works for user mode is better.
>
> +#ifdef TARGET_RISCV32
> +#define riscv_cpu_sxl(env)  ((void)(env), MXL_RV32)
> +#else
> +static inline RISCVMXL riscv_cpu_sxl(CPURISCVState *env)
> +{
> +#ifdef CONFIG_USER_ONLY
> +    return env->misa_mxl;
> +#else
> +    return get_field(env->mstatus, MSTATUS64_SXL);
> +#endif
> +}
> +#endif
> +
>
> >   /*
> >    * Encode LMUL to lmul as follows:
> >    *     LMUL    vlmul    lmul
> > diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h
> > index 7c87433645..37b622fbfa 100644
> > --- a/target/riscv/cpu_bits.h
> > +++ b/target/riscv/cpu_bits.h
> > @@ -493,6 +493,13 @@ typedef enum {
> >   /* Page table PPN shift amount */
> >   #define PTE_PPN_SHIFT       10
> >
> > +/* Page table PPN mask */
> > +#if defined(TARGET_RISCV32)
> > +#define PTE_PPN_MASK        0xFFFFFC00UL
> > +#elif defined(TARGET_RISCV64)
> > +#define PTE_PPN_MASK        0x3FFFFFFFFFFC00ULL
> > +#endif
> > +
>
> No need to define PTE_PPN_MASK for TARGET_RISCV32.

ppn = (pte & PTE_PPN_MASK) >> PTE_PPN_SHIFT;

pte is target_ulong, so types are different.

TARGET_RISCV32: is 32bit.
TARGET_RISCV64: is 64bit.

>
> >   /* Leaf page shift amount */
> >   #define PGSHIFT             12
> >
> > diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
> > index 327a2c4f1d..2a921bedfd 100644
> > --- a/target/riscv/cpu_helper.c
> > +++ b/target/riscv/cpu_helper.c
> > @@ -622,7 +622,19 @@ restart:
> >               return TRANSLATE_FAIL;
> >           }
> >
> > -        hwaddr ppn = pte >> PTE_PPN_SHIFT;
> > +        hwaddr ppn;
> > +        RISCVCPU *cpu = env_archcpu(env);
> > +
> > +        if (riscv_cpu_sxl(env) == MXL_RV32) {
> > +            ppn = pte >> PTE_PPN_SHIFT;
> > +        } else if (cpu->cfg.ext_svpbmt || cpu->cfg.ext_svnapot) {
> > +            ppn = (pte & PTE_PPN_MASK) >> PTE_PPN_SHIFT;
> > +        } else {
> > +            ppn = pte >> PTE_PPN_SHIFT;
> > +            if ((pte & ~PTE_PPN_MASK) >> PTE_PPN_SHIFT) {
> > +                return TRANSLATE_FAIL;
> > +            }
> > +        }
> >
> >           if (!(pte & PTE_V)) {
> >               /* Invalid PTE */
>
> Otherwise,
>
> Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
>
> Thanks,
> Zhiwei
>
>
>


-- 
Best Regards
 Guo Ren

ML: https://lore.kernel.org/linux-csky/



reply via email to

[Prev in Thread] Current Thread [Next in Thread]